Hi all,
I tried to report unsupported device via
http://www.meier-geinitz.de/tinc?key=rDoQ7lrj&formname=adddev
but it fails with some error written in German language which I don't
understand.
So, I am trying to report unsupported device via this mail list - sorry,
if it is wrong place or my report is duplicate to some another etc.
If there is somebody interested to create sane-backend to this device I
can help him e.g. by dumping Windows USB communication via SniffUSB
according to some detailed instructions.
Best regards
Ales
The unsupported device is Umax AstraScan 4750, there are some details:
Manufacturer: Umax
Model Name: AstraScan 4750
Bus type: USB
Vendor ID: 0x07b3
Product ID: 0x0802
Chipset: unknown
Comments:
Windows: The support CD (supplied with device) creates folder "Plustek
OpticPro ST28 V4.0.0" in Start->Programs menu, i.e. it looks like this
device is maybe some another variant of Plustek OpticPro ST28.
(Hardware ID from Windows driver is USB\Vid_07b3&Pid_0802&Rev_0303)
Data:
sane-find-scanner -v -v:
<device descriptor of 0x07b3/0x0802 at 001:003 (PLUSTEK USB2.0 SCANNER)>
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255
bDeviceSubClass 255
bDeviceProtocol 255
bMaxPacketSize0 64
idVendor 0x07B3
idProduct 0x0802
bcdDevice 3.03
iManufacturer 1 (PLUSTEK)
iProduct 5 (USB2.0 SCANNER)
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 192 (Self-powered)
MaxPower 10 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 255
bInterfaceProtocol 255
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 2>
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 8 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for GT-6801 ...
this is not a GT-6801 (bcdUSB = 0x200)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GT-8911 ...
this is not a GT-8911 (check 1, bDeviceClass = 255, bInterfaceClass
= 255)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1015 ...
this is not a MA-1015 (bcdUSB = 0x200)
checking for MA-1509 ...
this is not a MA-1509 (bcdUSB = 0x200)
checking for LM983[1,2,3] ...
this is not a LM983x (bcdUSB = 0x200)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GL646_HP ...
this is not a GL646_HP (bcdUSB = 0x200)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 255, bInterfaceClass =
255)
checking for GL84x ...
<This USB chip looks like a GL842 (result from sane-backends 1.0.21)>
found USB scanner (vendor=0x07b3 [PLUSTEK], product=0x0802 [USB2.0
SCANNER], chip=GL842) at libusb:001:003
cat /proc/bus/usb/devices:
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=07b3 ProdID=0802 Rev= 3.03
S: Manufacturer=PLUSTEK
S: Product=USB2.0 SCANNER
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 10mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=16ms
