On Mon, Oct 1, 2012 at 9:16 PM, Ralf Blicker <mail at ralfblicker.de> wrote: > > Hello everybody, > > i've an Printer/Copier/Scan - System by Triumph-Adler. > > This is a network/usb-printer/scanner. > > I would like to use the scanner with sane connected via usb. > The printing-system is conncted to a cups-server via ethernet.
Hi Ralph, I suggest you first try with USB connection, to figure out if there is a backend that will actually work with this scanner. After that, you can try to get the network part of SANE incorporated. > -------------------------------- > > Here the output of lsusb: /../ > Bus 001 Device 005: ID 0482:032b Kyocera Corp. /../ > Here the output of sane-find-scanner: /../ > found USB scanner (vendor=0x0482 [UTAX_TA], product=0x032b [UTAX_TA CD > 1018_DC 2018]) at libusb:001:005 > # Your USB scanner was (probably) detected. It may or may not be supported > by > # SANE. Try scanimage -L and read the backend's manpage. The SANE CVS supported models list for Kyocera is here: http://www.sane-project.org/lists/sane-mfgs-cvs.html#Z-KYOCERA So your model is not supported, but maybe the sane-avision backend may work. Here the (linked above) manpage: http://www.sane-project.org/man/sane-avision.5.html Regards, Gernot Hassenpflug
