I have noticed the lines: checking for usb.h... yes checking for usb_interrupt_read in -lusb... yes checking lusb0_usb.h usability... no checking lusb0_usb.h presence... no checking for lusb0_usb.h... no
in the output of ./configure. Maybe this is causing my problem? How do I get the lusb0_usb.h? ---------- Forwarded message ---------- From: Sergey Zolotaryov <anyd...@gmail.com> Date: 2012/5/11 Subject: Re: [sane-devel] Canon 9000F To: "m. allan noah" <kitno455 at gmail.com> Looks like the backend is loaded: anydoby at anydoby-System-Product-Name:~/sane/sane-backends$ SANE_DEBUG_DLL=255 scanimage -L [sanei_debug] Setting debug level of dll to 255. [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.22 [dll] sane_init/read_dlld: attempting to open directory `./dll.d' [dll] sane_init/read_dlld: attempting to open directory `/etc/sane.d/dll.d' [dll] sane_init/read_dlld: using config directory `/etc/sane.d/dll.d' [dll] sane_init/read_dlld: done. [dll] sane_init/read_config: reading dll.conf [dll] add_backend: adding backend `canon' [dll] add_backend: adding backend `canon630u' [dll] add_backend: adding backend `canon_dr' [dll] add_backend: adding backend `canon_pp' [dll] add_backend: adding backend `pixma' [dll] sane_get_devices [dll] load: searching backend `pixma' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-pixma.so.1' [dll] init: initializing backend `pixma' [dll] init: backend `pixma' is version 1.0.16 [dll] load: searching backend `canon_pp' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_pp.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_pp.so.1' [dll] init: initializing backend `canon_pp' [dll] load: searching backend `canon_dr' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon_dr.so.1' [dll] init: initializing backend `canon_dr' [dll] init: backend `canon_dr' is version 1.0.37 [dll] load: searching backend `canon630u' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon630u.so.1' [dll] init: initializing backend `canon630u' [dll] init: backend `canon630u' is version 1.0.1 [dll] load: searching backend `canon' in `/usr/lib/x86_64-linux-gnu/sane:/usr/lib/sane' [dll] load: trying to load `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [dll] load: dlopen()ing `/usr/lib/x86_64-linux-gnu/sane/libsane-canon.so.1' [dll] init: initializing backend `canon' [dll] init: backend `canon' is version 1.0.0 [dll] sane_get_devices: found 0 devices No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). [dll] sane_exit: exiting [dll] sane_exit: calling backend `pixma's exit function [dll] sane_exit: calling backend `canon_dr's exit function [dll] sane_exit: calling backend `canon630u's exit function [dll] sane_exit: calling backend `canon's exit function [dll] sane_exit: finished I've also tried the sane-troubleshoot, did not find anything again :( 2012/5/11 m. allan noah <kitno455 at gmail.com> > SANE_DEBUG_DLL=255 scanimage -L > > Look thru that output, and make sure it is loading the pixma backend. > > allan > > On Fri, May 11, 2012 at 5:12 PM, Sergey Zolotaryov <anydoby at gmail.com> > wrote: > > Same thing: > > > > root at anydoby:/home/anydoby/sane/sane-backends# sane-find-scanner > > > > # sane-find-scanner will now attempt to detect your scanner. If the > > # result is different from what you expected, first make sure your > > # scanner is powered up and properly connected to your computer. > > > > # No SCSI scanners found. If you expected something different, make sure > > that > > # you have loaded a kernel SCSI driver for your SCSI adapter. > > > > found USB scanner (vendor=0x04a9 [Canon], product=0x1908 [CanoScan]) at > > libusb:002:009 > > found USB scanner (vendor=0x0df6 [Ralink], product=0x0040 [802.11 n > WLAN]) > > at libusb:001:005 > > # Your USB scanner was (probably) detected. It may or may not be > supported > > by > > # SANE. Try scanimage -L and read the backend's manpage. > > > > # Not checking for parallel port scanners. > > > > # Most Scanners connected to the parallel port or other proprietary ports > > # can't be detected by this program. > > root at anydoby:/home/anydoby/sane/sane-backends# scanimage -L > > > > device `v4l:/dev/video0' is a Noname VF0610 Live! Cam Socialize HD > virtual > > device > > root at anydoby:/home/anydoby/sane/sane-backends# > > > > 2012/5/11 m. allan noah <kitno455 at gmail.com> > >> > >> try as root > >> > >> allan > >> > >> On Fri, May 11, 2012 at 4:04 PM, Sergey Zolotaryov <anydoby at gmail.com> > >> wrote: > >> > Hi Alan, > >> > > >> > Again the same :( > >> > > >> > I configured and installed sane using your commands. > >> > > >> > Now I get the following: > >> > anydoby at anydoby-System-Product-Name:~/sane/sane-backends$ sudo > >> > sane-find-scanner > >> > > >> > # sane-find-scanner will now attempt to detect your scanner. If the > >> > # result is different from what you expected, first make sure your > >> > # scanner is powered up and properly connected to your computer. > >> > > >> > # No SCSI scanners found. If you expected something different, make > sure > >> > that > >> > # you have loaded a kernel SCSI driver for your SCSI adapter. > >> > > >> > found USB scanner (vendor=0x04a9 [Canon], product=0x1908 [CanoScan]) > at > >> > libusb:002:009 > >> > found USB scanner (vendor=0x0df6 [Ralink], product=0x0040 [802.11 n > >> > WLAN]) > >> > at libusb:001:005 > >> > > >> > # Your USB scanner was (probably) detected. It may or may not be > >> > supported > >> > by > >> > # SANE. Try scanimage -L and read the backend's manpage. > >> > > >> > # Not checking for parallel port scanners. > >> > > >> > # Most Scanners connected to the parallel port or other proprietary > >> > ports > >> > # can't be detected by this program. > >> > > >> > My /etc/sane.d/pixma.conf contains this: > >> > > >> > # pixma.conf configuration for the sane pixma backend > >> > # > >> > # define URI's of scanners (one per line) > >> > # This is only used for network scanners. > >> > # normally scanners will be detected by sending a broadcast > >> > # if this does not work under your OS, or if the scanners > >> > # are on a different subnet, configure your scanners URI here > >> > # > >> > # method must be bjnp > >> > # port number can normally be left out, port 8612 is used as default > >> > # Example: > >> > # bjnp://myscanner.my.domain:8612 > >> > # bjnp://printer-1.pheasant.org > >> > # > >> > usb 0x04a9 0x1908 > >> > > >> > And: > >> > anydoby at anydoby-System-Product-Name:~/sane/sane-backends$ sudo > scanimage > >> > -L > >> > > >> > device `v4l:/dev/video0' is a Noname VF0610 Live! Cam Socialize HD > >> > virtual > >> > device > >> > anydoby at anydoby-System-Product-Name:~/sane/sane-backends$ > >> > > >> > So again only my webcam is detected. > >> > > >> > 2012/5/11 m. allan noah <kitno455 at gmail.com> > >> >> > >> >> Generally you do not want to uninstall the systems sane, as this will > >> >> > >> >> uninstall all the front-end programs too. Instead, you want to > compile > >> >> sane such that it will overwrite the original version. something > like: > >> >> > >> >> BACKENDS=pixma ./configure --prefix=/usr --sysconfdir=/etc > >> >> make > >> >> make install > >> >> > >> >> you will likely also have permissions problems, as the device > >> >> permissions are managed by the OS, not by sane. So, try to test as > >> >> root initially. > >> >> > >> >> allan > >> >> > >> >> On Fri, May 11, 2012 at 7:36 AM, Sergey Zolotaryov < > anydoby at gmail.com> > >> >> wrote: > >> >> > Hi Kerstin, > >> >> > > >> >> > I think this may be the issue. I'll try to cleanup everything I've > >> >> > installed > >> >> > last night :) and then start clean. You know us noobs - we try part > >> >> > of a > >> >> > solution from one blog, then the other from the second blog and > then > >> >> > post > >> >> > our problems to the third one. I'll write up what happens today in > >> >> > the > >> >> > evening. > >> >> > > >> >> > Again sorry to disturb you all, thank you for fast replies. > >> >> > > >> >> > 2012/5/11 Kerstin Hoef-Emden <aeb25 at uni-koeln.de> > >> >> >> > >> >> >> > >> >> >> Hi, > >> >> >> > >> >> >> did you uninstall the older sane version of the distribution > before? > >> >> >> This > >> >> >> caused in my case problems. > >> >> >> > >> >> >> Best wishes, > >> >> >> > >> >> >> Kerstin > >> >> >> > >> >> >> > >> >> >> On Fri, 11 May 2012, Sergey Zolotaryov wrote: > >> >> >> > >> >> >>> Good afternoon, > >> >> >>> > >> >> >>> Yesterday I started setting up my CanoScan 9000F. According to > the > >> >> >>> docs > >> >> >>> sane supports this scaner since last year. I compiled the sources > >> >> >>> for > >> >> >>> sane-backend (with libusb) the sane-find-scaner output is the > >> >> >>> following: > >> >> >>> > >> >> >>> anydoby at anydoby-System-Product-Name > :~/sane/sane-backends/backend$ > >> >> >>> sane-find-scanner > >> >> >>> > >> >> >>> # sane-find-scanner will now attempt to detect your scanner. If > the > >> >> >>> # result is different from what you expected, first make sure > your > >> >> >>> # scanner is powered up and properly connected to your computer. > >> >> >>> > >> >> >>> # No SCSI scanners found. If you expected something different, > make > >> >> >>> sure > >> >> >>> that > >> >> >>> # you have loaded a kernel SCSI driver for your SCSI adapter. > >> >> >>> > >> >> >>> found USB scanner (vendor=0x04a9, product=0x1908) at > libusb:002:012 > >> >> >>> found USB scanner (vendor=0x0df6, product=0x0040) at > libusb:001:004 > >> >> >>> # Your USB scanner was (probably) detected. It may or may not be > >> >> >>> supported > >> >> >>> by > >> >> >>> # SANE. Try scanimage -L and read the backend's manpage. > >> >> >>> > >> >> >>> # Not checking for parallel port scanners. > >> >> >>> > >> >> >>> # Most Scanners connected to the parallel port or other > proprietary > >> >> >>> ports > >> >> >>> # can't be detected by this program. > >> >> >>> > >> >> >>> # You may want to run this program as root to find all devices. > >> >> >>> Once > >> >> >>> you > >> >> >>> # found the scanner devices, be sure to adjust access permissions > >> >> >>> as > >> >> >>> # necessary. > >> >> >>> > >> >> >>> > >> >> >>> I assume the (vendor=0x04a9, product=0x1908) is my scanner, as > for > >> >> >>> the > >> >> >>> second line, I suspect this is my webcam. > >> >> >>> > >> >> >>> The scanimage -L output is not good: > >> >> >>> > >> >> >>> anydoby at anydoby-System-Product-Name > :~/sane/sane-backends/backend$ > >> >> >>> scanimage > >> >> >>> -L > >> >> >>> device `v4l:/dev/video0' is a Noname VF0610 Live! Cam Socialize > HD > >> >> >>> virtual > >> >> >>> device > >> >> >>> > >> >> >>> I do not see the scaner. I have added an entry "usb 0x04a9 > 0x1908" > >> >> >>> to > >> >> >>> the > >> >> >>> /etc/sane.d/pixma.conf as was recommended in some post on the > >> >> >>> topic, > >> >> >>> but > >> >> >>> still nothing is detected. What can I do about it? I am sure that > >> >> >>> the > >> >> >>> scaner works, as under Windows it worked ok. > >> >> >>> > >> >> >>> > >> >> >> > >> >> >> -- > >> >> >> > >> >> >> PD Dr. Kerstin Hoef-Emden Z?lpicher Str. 47b > >> >> >> Universit?t zu K?ln 50674 K?ln > >> >> >> Biozentrum K?ln (Cologne Biocenter) Germany > >> >> >> Botanisches Institut > >> >> >> > >> >> >> http://www.uni-koeln.de/~aeb25/ > >> >> > > >> >> > > >> >> > > >> >> > > >> >> > -- > >> >> > Best regards, > >> >> > Sergey Zolotaryov > >> >> > > >> >> > -- > >> >> > sane-devel mailing list: sane-devel at lists.alioth.debian.org > >> >> > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel > >> >> > Unsubscribe: Send mail with subject "unsubscribe your_password" > >> >> > to sane-devel-request at lists.alioth.debian.org > >> >> > >> >> > >> >> > >> >> -- > >> >> "The truth is an offense, but not a sin" > >> > > >> > > >> > > >> > > >> > -- > >> > Best regards, > >> > Sergey Zolotaryov > >> > >> > >> > >> -- > >> "The truth is an offense, but not a sin" > > > > > > > > > > -- > > Best regards, > > Sergey Zolotaryov > > > > -- > "The truth is an offense, but not a sin" > -- Best regards, Sergey Zolotaryov -- Best regards, Sergey Zolotaryov -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20120512/85949d36/attachment-0001.html>
