I just forgot to add the output of /var/log/message on the latest test: Jul 18 12:44:53 localhost kernel: [18800.039108] usb 3-2: new full speed USB device using uhci_hcd and address 17 Jul 18 12:44:53 localhost kernel: [18800.197185] usb 3-2: New USB device found, idVendor=04a5, idProduct=20f8 Jul 18 12:44:53 localhost kernel: [18800.197194] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Jul 18 12:44:53 localhost kernel: [18800.197201] usb 3-2: Product: FlatbedScanner 22 Jul 18 12:44:53 localhost kernel: [18800.197207] usb 3-2: Manufacturer: Color Jul 18 12:44:53 localhost mtp-probe: checking bus 3, device 17: "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2" Jul 18 12:44:54 localhost mtp-probe: bus: 3, device: 17 was not an MTP device Jul 18 12:46:34 localhost kernel: [18901.023266] scanimage[6114]: segfault at 68 ip 4376a87e sp bf90e908 error 4 in libpthread-2.14.so[43763000+16000] Jul 18 12:46:34 localhost abrt[6115]: Unrecognized variable 'DumpLocation' in '/etc/abrt/abrt.conf' Jul 18 12:46:34 localhost abrtd: Unrecognized variable 'DumpLocation' in '/etc/abrt/abrt.conf' Jul 18 12:46:34 localhost abrt[6115]: saved core dump of pid 6114 (/usr/bin/scanimage) to /var/spool/abrt/ccpp-2011-07-18-12:46:34-6114.new/coredump (1552384 bytes) Jul 18 12:46:34 localhost abrtd: Directory 'ccpp-2011-07-18-12:46:34-6114' creation detected Jul 18 12:46:35 localhost abrtd: Dump directory is a duplicate of /var/spool/abrt/ccpp-2011-07-18-10:22:44-4944 Jul 18 12:46:35 localhost abrtd: Deleting dump directory ccpp-2011-07-18-12:46:34-6114 (dup of ccpp-2011-07-18-10:22:44-4944), sending dbus signal Jul 18 12:46:35 localhost abrtd: Unrecognized variable 'DumpLocation' in '/etc/abrt/abrt.conf'
2011/7/18 Noe Nieto <nnieto at noenieto.com> > Hi, > > I have a BenQ 5000 Scanner. It is labeled as "Alaska 5000U", but is > detected as BenQ 5000. > > I've set-up the scanner as the snapscan page suggest. I'm using the > 20F8V114.bin firmware that came with the original CD. > > Any hint on how to make it work? I can provide more data if needed. > > > The test case is as follows: > > Step 1: Connect scanner and detect: > ----------------------------------------------------- > > *Makes some noises > > # sane-find-scanner > found USB scanner (vendor=0x04a5 [Color], product=0x20fc [ > FlatbedScanner 22]) at libusb:003:015 > found USB scanner (vendor=0x16d8, product=0x6803) at libusb:005:003 > > # lsusb > .... > Bus 003 Device 015: ID 04a5:20fc Acer Peripherals Inc. (now BenQ Corp.) > Benq 5000 > > # scanimage -L > [sanei_debug] Setting debug level of snapscan to 5. > device `snapscan:libusb:003:015' is a Acer FlatbedScanner25 flatbed scanner > > > .... and the relevant output in /var/log/messages > > Jul 18 12:00:43 localhost kernel: [16150.204082] usb 3-2: new full speed > USB device using uhci_hcd and address 16 > Jul 18 12:00:44 localhost kernel: [16150.392127] usb 3-2: New USB device > found, idVendor=04a5, idProduct=20fc > Jul 18 12:00:44 localhost kernel: [16150.392133] usb 3-2: New USB device > strings: Mfr=1, Product=2, SerialNumber=0 > Jul 18 12:00:44 localhost kernel: [16150.392137] usb 3-2: Product: > FlatbedScanner 22 > Jul 18 12:00:44 localhost kernel: [16150.392141] usb 3-2: Manufacturer: > Color > Jul 18 12:00:44 localhost mtp-probe: checking bus 3, device 16: > "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2" > Jul 18 12:00:44 localhost mtp-probe: bus: 3, device: 16 was not an MTP > device > > > > Step 2: Try to grab a PNM > ---------------------------------------- > # scanimage >image.pnm > [sanei_debug] Setting debug level of snapscan to 5. > [snapscan] test_unit_ready: snapscan_cmd command failed: Device busy > [snapscan] usb_read Only 36 bytes read > [snapscan] inquiry: snapscan_cmd command failed: Error during device I/O > [snapscan] sane_snapscan_open: error in inquiry command: Error during > device I/O > scanimage: open of device snapscan:libusb:003:015 failed: Error during > device I/O > > > # SANE_DEBUG_SNAPSCAN=255 scanimage > image.pnm > [sanei_debug] Setting debug level of snapscan to 255. > [snapscan] sane_snapscan_init > [snapscan] sane_snapscan_init: Snapscan backend version 1.4.53 > [snapscan] add_usb_device(libusb:003:016) > [snapscan] add_usb_device: Detected (kind of) an USB device > [snapscan] snapscani_usb_open(libusb:003:016) > [snapscan] add_usb_device: Checking if 0x04a5 is a supported USB vendor ID > [snapscan] snapscani_check_device() > [snapscan] mini_inquiry > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0xbfba4d36,6,0xbfba4d12,0xbfba4d0c (36)) > [snapscan] atomic_usb_cmd(0,0xbfba4d36,6,0xbfba4d12,0xbfba4d0c (36)) > [snapscan] usb_cmd(0,0xbfba4d36,6,0xbfba4d12,0xbfba4d0c (36)) > [snapscan] usb_cmd: cmdlen=6, datalen=0 > [snapscan] usb_write: writing: 0x12 0x00 0x00 0x00 0x24 0x00 > [snapscan] Written 6 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] snapscani_check_device: Is vendor "?? ??" model "?????" a > supported scanner? > [snapscan] snapscani_check_device: "?? ?? ?????" is not one of AGFA > SnapScan 300, 310, 600, 1212, 1236, e10, e20, e25, e26, e40, e42, e50, e52 > or e60 > Acer 300, 310, 610, 610+, 620, 620+, 640, 1240, 3300, 4300 or 5300 > Guillemot MaxiScan A4 Deluxe > [snapscan] snapscani_usb_close(0) > [snapscan] 1st read 1 write 1 > [snapscan] snapscani_usb_cmd(0,0xbfba4d1e,6,0x0,0x0 (0)) > [snapscan] atomic_usb_cmd(0,0xbfba4d1e,6,0x0,0x0 (0)) > [snapscan] usb_cmd(0,0xbfba4d1e,6,0x0,0x0 (0)) > [snapscan] usb_cmd: cmdlen=6, datalen=0 > [snapscan] usb_write: writing: 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Written 6 bytes > [snapscan] usb_read: reading: 0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] usb_cmd: The transaction should now be completed, but the > scanner has more data to send[snapscan] 2nd read 2 write 2 > [snapscan] sane_snapscan_get_devices (0xbfba5fbc, 0) > scanimage: no SANE devices found > [snapscan] sane_snapscan_exit > > > Step 3: retry scan after several minutes and cold shutdown (unplugged > scanner): > > scanimage -L > [sanei_debug] Setting debug level of snapscan to 5. > device `snapscan:libusb:003:017' is a Acer FlatbedScanner22 flatbed scanner > > # SANE_DEBUG_SNAPSCAN=255 scanimage > image.pnm > [sanei_debug] Setting debug level of snapscan to 255. > [snapscan] sane_snapscan_init > [snapscan] sane_snapscan_init: Snapscan backend version 1.4.53 > [snapscan] add_usb_device(libusb:003:017) > [snapscan] add_usb_device: Detected (kind of) an USB device > [snapscan] snapscani_usb_open(libusb:003:017) > [snapscan] add_usb_device: Checking if 0x04a5 is a supported USB vendor ID > [snapscan] snapscani_check_device() > [snapscan] mini_inquiry > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0xbf90d836,6,0xbf90d812,0xbf90d80c (36)) > [snapscan] atomic_usb_cmd(0,0xbf90d836,6,0xbf90d812,0xbf90d80c (36)) > [snapscan] usb_cmd(0,0xbf90d836,6,0xbf90d812,0xbf90d80c (36)) > [snapscan] usb_cmd: cmdlen=6, datalen=0 > [snapscan] usb_write: writing: 0x12 0x00 0x00 0x00 0x24 0x00 > [snapscan] Written 6 bytes > [snapscan] usb_read: reading: 0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] usb_read: reading: 0x06 0x00 0x02 0x02 0x49 0x00 0x00 0x00 0x43 > 0x6f ... > [snapscan] Read 36 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] snapscani_check_device: Is vendor "Color" model > "FlatbedScanner22" a supported scanner? > [snapscan] snapscani_get_model_id(FlatbedScanner22, 0, 2) > [snapscan] snapscani_get_model_id: looking up scanner for ID 0x04a5,0x20f8. > [snapscan] snapscani_check_device: Autodetected driver: Acer4300 (42 bit) > [snapscan] snapscani_usb_close(0) > [snapscan] 1st read 3 write 1 > [snapscan] snapscani_usb_cmd(0,0xbf90d81e,6,0x0,0x0 (0)) > [snapscan] atomic_usb_cmd(0,0xbf90d81e,6,0x0,0x0 (0)) > [snapscan] usb_cmd(0,0xbf90d81e,6,0x0,0x0 (0)) > [snapscan] usb_cmd: cmdlen=6, datalen=0 > [snapscan] usb_write: writing: 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Written 6 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] 2nd read 4 write 2 > [snapscan] snapscani_init_device_structure() > [snapscan] sane_snapscan_get_devices (0xbf90eabc, 0) > [snapscan] sane_snapscan_open (libusb:003:017, 0xbf90eab4) > [snapscan] find_device > [snapscan] sane_snapscan_open: Allocating 64512 bytes as scanner buffer. > [snapscan] sane_snapscan_open: allocated scanner structure at 0x8681998 > [snapscan] open_scanner > [snapscan] snapscani_usb_open(libusb:003:017) > [snapscan] sane_snapscan_open: waiting for scanner to warm up. > [snapscan] wait_scanner_ready > [snapscan] test_unit_ready > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0xbf90e9c6,6,0x0,0x0 (0)) > [snapscan] atomic_usb_cmd(0,0xbf90e9c6,6,0x0,0x0 (0)) > [snapscan] usb_cmd(0,0xbf90e9c6,6,0x0,0x0 (0)) > [snapscan] usb_cmd: cmdlen=6, datalen=0 > [snapscan] usb_write: writing: 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Written 6 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] sane_snapscan_open: performing scanner self test. > [snapscan] send_diagnostic > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0xbf90ea44,6,0x0,0x0 (0)) > [snapscan] atomic_usb_cmd(0,0xbf90ea44,6,0x0,0x0 (0)) > [snapscan] usb_cmd(0,0xbf90ea44,6,0x0,0x0 (0)) > [snapscan] sane_snapscan_open: self test passed. > [snapscan] inquiry > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0x86819c8,6,0x8682148,0x8681ad8 (120)) > [snapscan] atomic_usb_cmd(0,0x86819c8,6,0x8682148,0x8681ad8 (120)) > [snapscan] usb_cmd(0,0x86819c8,6,0x8682148,0x8681ad8 (120)) > [snapscan] usb_cmd: cmdlen=6, datalen=0 > [snapscan] usb_write: writing: 0x12 0x00 0x00 0x00 0x78 0x00 > [snapscan] Written 6 bytes > [snapscan] usb_read: reading: 0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] usb_read: reading: 0x06 0x00 0x02 0x02 0x49 0x00 0x00 0x00 0x43 > 0x6f ... > [snapscan] Read 120 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] inquiry: exposure time: 0.0 ms > [snapscan] inquiry: ms per line: 0.000000 > [snapscan] inquiry: G2R_DIFF: 0 > [snapscan] inquiry: B2R_DIFF: 0 > [snapscan] inquiry: Chroma offsets=0; Red=0, Green:=0, Blue=0 > [snapscan] inquiry: hardware config = 0x00 > [snapscan] inquiry: bits per pixel = 8 > [snapscan] inquiry: pixels per scan line = 0 > [snapscan] inquiry: bytes per scan line = 0 > [snapscan] inquiry: number of scan lines = 0 > [snapscan] inquiry: effective buffer size = 0 bytes, 0 lines > [snapscan] inquiry: expected total scan data: 0 bytes > [snapscan] Looking up 248 > [snapscan] Downloading /usr/share/sane/snapscan/20F8V114.bin > [snapscan] Size of firmware: 65281 > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0x8691eb8,65291,0x0,0x0 (0)) > [snapscan] atomic_usb_cmd(0,0x8691eb8,65291,0x0,0x0 (0)) > [snapscan] usb_cmd(0,0x8691eb8,65291,0x0,0x0 (0)) > [snapscan] usb_cmd: cmdlen=10, datalen=65281 > [snapscan] usb_write: writing: 0x2a 0x00 0x87 0x00 0x00 0x00 0x00 0xff > 0x01 0x00 > [snapscan] Written 10 bytes > [snapscan] usb_read: reading: 0xf8 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] usb_write: writing: 0x02 0x79 0xde 0x02 0x19 0x1a 0x7f 0x7c > 0x02 0x91 ... > [snapscan] Written 65281 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] wait_scanner_ready > [snapscan] test_unit_ready > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0xbf90e9c6,6,0x0,0x0 (0)) > [snapscan] atomic_usb_cmd(0,0xbf90e9c6,6,0x0,0x0 (0)) > [snapscan] usb_cmd(0,0xbf90e9c6,6,0x0,0x0 (0)) > [snapscan] usb_cmd: cmdlen=6, datalen=0 > [snapscan] usb_write: writing: 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Written 6 bytes > [snapscan] usb_read: reading: 0xfb 0x02 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] usb_request_sense > [snapscan] usb_cmd(0,0xbf90e716,6,0xbf90e6fa,0xbf90e6f4 (20)) > [snapscan] usb_cmd: cmdlen=6, datalen=0 > [snapscan] usb_write: writing: 0x03 0x00 0x00 0x00 0x14 0x00 > [snapscan] Written 6 bytes > [snapscan] usb_read: reading: 0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] usb_read: reading: 0xf0 0x00 0x02 0x00 0x00 0x00 0x00 0x0b 0x00 > 0x00 ... > [snapscan] Read 20 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] sense_handler(0, 0xbf90e6fa, 0x8681998) > [snapscan] sense_handler: sense key: 0x02, asc: 0x04, ascq: 0x01, i1: 0x1f, > i2: 0x00 > [snapscan] sense_handler: Not ready. > [snapscan] sense_handler: Logical unit is in process of becoming ready. (31 > seconds) > [snapscan] sense_handler: Not ready. > [snapscan] test_unit_ready: snapscan_cmd command failed: Device busy > [snapscan] Scanner warming up - waiting 31 seconds. > [snapscan] test_unit_ready > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0xbf90e9c6,6,0x0,0x0 (0)) > [snapscan] atomic_usb_cmd(0,0xbf90e9c6,6,0x0,0x0 (0)) > [snapscan] usb_cmd(0,0xbf90e9c6,6,0x0,0x0 (0)) > [snapscan] usb_cmd: cmdlen=6, datalen=0 > [snapscan] usb_write: writing: 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Written 6 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] mini_inquiry > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0xbf90e9c6,6,0xbf90e9a2,0xbf90e99c (36)) > [snapscan] atomic_usb_cmd(0,0xbf90e9c6,6,0xbf90e9a2,0xbf90e99c (36)) > [snapscan] usb_cmd(0,0xbf90e9c6,6,0xbf90e9a2,0xbf90e99c (36)) > [snapscan] usb_cmd: cmdlen=6, datalen=0 > [snapscan] usb_write: writing: 0x12 0x00 0x00 0x00 0x24 0x00 > [snapscan] Written 6 bytes > [snapscan] usb_read: reading: 0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] usb_read: reading: 0x06 0x00 0x02 0x02 0x57 0x00 0x00 0x00 0x43 > 0x6f ... > [snapscan] Read 36 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] sane_snapscan_open (after firmware upload): Checking if > "FlatbedScanner42" is a supported scanner > [snapscan] snapscani_get_model_id(FlatbedScanner42, 0, 2) > [snapscan] snapscani_get_model_id: looking up scanner for ID 0x04a5,0x20f8. > [snapscan] inquiry > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0x86819c8,6,0x8682148,0x8681ad8 (138)) > [snapscan] atomic_usb_cmd(0,0x86819c8,6,0x8682148,0x8681ad8 (138)) > [snapscan] usb_cmd(0,0x86819c8,6,0x8682148,0x8681ad8 (138)) > [snapscan] usb_cmd: cmdlen=6, datalen=0 > [snapscan] usb_write: writing: 0x12 0x00 0x00 0x00 0x8a 0x00 > [snapscan] Written 6 bytes > [snapscan] usb_read: reading: 0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] usb_read: reading: 0x06 0x00 0x02 0x02 0x57 0x00 0x00 0x00 0x43 > 0x6f ... > [snapscan] Read 138 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] inquiry: exposure time: ;.0 ms > [snapscan] inquiry: ms per line: 0.000000 > [snapscan] inquiry: G2R_DIFF: 0 > [snapscan] inquiry: B2R_DIFF: 0 > [snapscan] inquiry: Chroma offsets=0; Red=0, Green:=0, Blue=0 > [snapscan] inquiry: hardware config = 0x9d > [snapscan] inquiry: bits per pixel = 14 > [snapscan] inquiry: pixels per scan line = 5100 > [snapscan] inquiry: bytes per scan line = 5100 > [snapscan] inquiry: number of scan lines = 0 > [snapscan] inquiry: effective buffer size = 0 bytes, 0 lines > [snapscan] inquiry: expected total scan data: 0 bytes > [snapscan] close_scanner > [snapscan] snapscani_usb_close(0) > [snapscan] 1st read 20 write 8170 > [snapscan] 2nd read 20 write 8170 > [snapscan] alloc_gamma_tables: using 4*16384 bytes for gamma table > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 0) > [snapscan] sane_snapscan_control_option (0x8681998, 0, 0, 0xbf90eba8, > (nil)) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 0) > [snapscan] sane_snapscan_control_option (0x8681998, 0, 0, 0xbf90ead8, > (nil)) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 1) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 2) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 3) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 4) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 5) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 6) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 7) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 8) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 9) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 10) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 11) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 12) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 13) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 14) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 15) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 16) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 17) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 18) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 19) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 20) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 21) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 22) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 23) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 24) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 25) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 26) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 27) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 28) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 29) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 30) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 31) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 32) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 33) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 34) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 35) > [snapscan] sane_snapscan_control_option (0x8681998, 11, 0, 0x80538b0, > (nil)) > [snapscan] sane_snapscan_control_option (0x8681998, 9, 0, 0xbf90eadc, > (nil)) > [snapscan] sane_snapscan_control_option (0x8681998, 12, 0, 0x80538b4, > (nil)) > [snapscan] sane_snapscan_control_option (0x8681998, 10, 0, 0xbf90eadc, > (nil)) > [snapscan] sane_snapscan_control_option (0x8681998, 9, 0, 0xbf90ebb0, > (nil)) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 11) > [snapscan] sane_snapscan_control_option (0x8681998, 11, 1, 0xbf90ebb4, > 0xbf90eadc) > [snapscan] sane_snapscan_control_option: option br-x set to value > [snapscan] other than an integer or boolean. > [snapscan] sane_snapscan_control_option (0x8681998, 10, 0, 0xbf90ebb0, > (nil)) > [snapscan] sane_snapscan_get_option_descriptor (0x8681998, 12) > [snapscan] sane_snapscan_control_option (0x8681998, 12, 1, 0xbf90ebb4, > 0xbf90eadc) > [snapscan] sane_snapscan_control_option: option br-y set to value > [snapscan] other than an integer or boolean. > [snapscan] sane_snapscan_start (0x8681998) > [snapscan] open_scanner > [snapscan] snapscani_usb_open(libusb:003:017) > [snapscan] wait_scanner_ready > [snapscan] test_unit_ready > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0xbf90e9d6,6,0x0,0x0 (0)) > [snapscan] atomic_usb_cmd(0,0xbf90e9d6,6,0x0,0x0 (0)) > [snapscan] usb_cmd(0,0xbf90e9d6,6,0x0,0x0 (0)) > [snapscan] usb_cmd: cmdlen=6, datalen=0 > [snapscan] usb_write: writing: 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Written 6 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] reserve_unit > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0xbf90ea96,6,0x0,0x0 (0)) > [snapscan] atomic_usb_cmd(0,0xbf90ea96,6,0x0,0x0 (0)) > [snapscan] usb_cmd(0,0xbf90ea96,6,0x0,0x0 (0)) > [snapscan] usb_cmd: cmdlen=6, datalen=0 > [snapscan] usb_write: writing: 0x16 0x00 0x00 0x00 0x00 0x00 > [snapscan] Written 6 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] set_window > [snapscan] set_window Resolution: 300 > [snapscan] set_window Width: 5102 > [snapscan] set_window Length: 7015 > [snapscan] set_window Mode: 0 > [snapscan] set_window: bits-per-pixel set to 8 > [snapscan] set_window: operation mode set to 0xc0 > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0x86819c8,66,0x0,0x0 (0)) > [snapscan] atomic_usb_cmd(0,0x86819c8,66,0x0,0x0 (0)) > [snapscan] usb_cmd(0,0x86819c8,66,0x0,0x0 (0)) > [snapscan] usb_cmd: cmdlen=10, datalen=56 > [snapscan] usb_write: writing: 0x24 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > 0x38 0x00 > [snapscan] Written 10 bytes > [snapscan] usb_read: reading: 0xf8 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] usb_write: writing: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x30 > 0x00 0x00 ... > [snapscan] Written 56 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] inquiry > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0x86819c8,6,0x8682148,0x8681ad8 (138)) > [snapscan] atomic_usb_cmd(0,0x86819c8,6,0x8682148,0x8681ad8 (138)) > [snapscan] usb_cmd(0,0x86819c8,6,0x8682148,0x8681ad8 (138)) > [snapscan] usb_cmd: cmdlen=6, datalen=0 > [snapscan] usb_write: writing: 0x12 0x00 0x00 0x00 0x8a 0x00 > [snapscan] Written 6 bytes > [snapscan] usb_read: reading: 0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] usb_read: reading: 0x06 0x00 0x02 0x02 0x57 0x00 0x00 0x00 0x43 > 0x6f ... > [snapscan] Read 138 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] inquiry: exposure time: ;.0 ms > [snapscan] inquiry: ms per line: 0.000000 > [snapscan] inquiry: G2R_DIFF: 134 > [snapscan] inquiry: B2R_DIFF: 140 > [snapscan] inquiry: Chroma offsets=12; Red=12, Green:=6, Blue=0 > [snapscan] inquiry: hardware config = 0x9d > [snapscan] inquiry: bits per pixel = 14 > [snapscan] inquiry: pixels per scan line = 2548 > [snapscan] inquiry: bytes per scan line = 7644 > [snapscan] inquiry: number of scan lines = 3480 > [snapscan] inquiry: effective buffer size = 61152 bytes, 17 lines > [snapscan] inquiry: expected total scan data: 26692848 bytes > [snapscan] download_gamma_tables > [snapscan] download_gamma_tables: Sending gamma table for 14 bpp > [snapscan] send > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0x8682148,16394,0x0,0x0 (0)) > [snapscan] atomic_usb_cmd(0,0x8682148,16394,0x0,0x0 (0)) > [snapscan] usb_cmd(0,0x8682148,16394,0x0,0x0 (0)) > [snapscan] usb_cmd: cmdlen=10, datalen=16384 > [snapscan] usb_write: writing: 0x2a 0x00 0x03 0x00 0x00 0x96 0x00 0x40 > 0x00 0x00 > [snapscan] Written 10 bytes > [snapscan] usb_read: reading: 0xf8 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] usb_write: writing: 0x00 0x01 0x02 0x02 0x03 0x03 0x03 0x03 > 0x04 0x04 ... > [snapscan] Written 16384 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] send > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0x8682148,16394,0x0,0x0 (0)) > [snapscan] atomic_usb_cmd(0,0x8682148,16394,0x0,0x0 (0)) > [snapscan] usb_cmd(0,0x8682148,16394,0x0,0x0 (0)) > [snapscan] usb_cmd: cmdlen=10, datalen=16384 > [snapscan] usb_write: writing: 0x2a 0x00 0x03 0x00 0x00 0x97 0x00 0x40 > 0x00 0x00 > [snapscan] Written 10 bytes > [snapscan] usb_read: reading: 0xf8 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] usb_write: writing: 0x00 0x01 0x02 0x02 0x03 0x03 0x03 0x03 > 0x04 0x04 ... > [snapscan] Written 16384 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] send > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0x8682148,16394,0x0,0x0 (0)) > [snapscan] atomic_usb_cmd(0,0x8682148,16394,0x0,0x0 (0)) > [snapscan] usb_cmd(0,0x8682148,16394,0x0,0x0 (0)) > [snapscan] usb_cmd: cmdlen=10, datalen=16384 > [snapscan] usb_write: writing: 0x2a 0x00 0x03 0x00 0x00 0x98 0x00 0x40 > 0x00 0x00 > [snapscan] Written 10 bytes > [snapscan] usb_read: reading: 0xf8 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] usb_write: writing: 0x00 0x01 0x02 0x02 0x03 0x03 0x03 0x03 > 0x04 0x04 ... > [snapscan] Written 16384 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] measure_transfer_rate: have ring buffer > [snapscan] scsi_read > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0x86819c8,10,0x8682148,0x8681ad8 (61184)) > [snapscan] atomic_usb_cmd(0,0x86819c8,10,0x8682148,0x8681ad8 (61184)) > [snapscan] usb_cmd(0,0x86819c8,10,0x8682148,0x8681ad8 (61184)) > [snapscan] usb_cmd: cmdlen=10, datalen=0 > [snapscan] usb_write: writing: 0x28 0x00 0x80 0x00 0x00 0x00 0x00 0xef > 0x00 0x00 > [snapscan] Written 10 bytes > [snapscan] usb_read: reading: 0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] usb_read: reading: 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x04 > 0x04 ... > [snapscan] Read 61184 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] scsi_read > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0x86819c8,10,0x8682148,0x8681ad8 (0)) > [snapscan] atomic_usb_cmd(0,0x86819c8,10,0x8682148,0x8681ad8 (0)) > [snapscan] usb_cmd(0,0x86819c8,10,0x8682148,0x8681ad8 (0)) > [snapscan] usb_cmd: cmdlen=10, datalen=0 > [snapscan] usb_write: writing: 0x28 0x00 0x80 0x00 0x00 0x00 0x00 0x00 > 0x00 0x00 > [snapscan] Written 10 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] scsi_read > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0x86819c8,10,0x8682148,0x8681ad8 (0)) > [snapscan] atomic_usb_cmd(0,0x86819c8,10,0x8682148,0x8681ad8 (0)) > [snapscan] usb_cmd(0,0x86819c8,10,0x8682148,0x8681ad8 (0)) > [snapscan] usb_cmd: cmdlen=10, datalen=0 > [snapscan] usb_write: writing: 0x28 0x00 0x80 0x00 0x00 0x00 0x00 0x00 > 0x00 0x00 > [snapscan] Written 10 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] measure_transfer_rate: successfully calibrated transfer rate. > [snapscan] inquiry > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0x86819c8,6,0x8682148,0x8681ad8 (138)) > [snapscan] atomic_usb_cmd(0,0x86819c8,6,0x8682148,0x8681ad8 (138)) > [snapscan] usb_cmd(0,0x86819c8,6,0x8682148,0x8681ad8 (138)) > [snapscan] usb_cmd: cmdlen=6, datalen=0 > [snapscan] usb_write: writing: 0x12 0x00 0x00 0x00 0x8a 0x00 > [snapscan] Written 6 bytes > [snapscan] usb_read: reading: 0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] usb_read: reading: 0x06 0x00 0x02 0x02 0x57 0x00 0x00 0x00 0x43 > 0x6f ... > [snapscan] Read 138 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] inquiry: exposure time: ;.0 ms > [snapscan] inquiry: ms per line: 0.000000 > [snapscan] inquiry: G2R_DIFF: 134 > [snapscan] inquiry: B2R_DIFF: 140 > [snapscan] inquiry: Chroma offsets=12; Red=12, Green:=6, Blue=0 > [snapscan] inquiry: hardware config = 0x9d > [snapscan] inquiry: bits per pixel = 14 > [snapscan] inquiry: pixels per scan line = 2548 > [snapscan] inquiry: bytes per scan line = 7644 > [snapscan] inquiry: number of scan lines = 3480 > [snapscan] inquiry: effective buffer size = 61152 bytes, 17 lines > [snapscan] inquiry: expected total scan data: 26692848 bytes > [snapscan] sane_snapscan_start: after measuring speed: > 7644 bytes per scan line > 0.000000 milliseconds per scan line. > ==>inf bytes per millisecond > [snapscan] calibrate: reading calibration data (2 lines) > [snapscan] read_calibration_data > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0x86819c8,10,0x86920f8,0xbf90e9dc (61200)) > [snapscan] atomic_usb_cmd(0,0x86819c8,10,0x86920f8,0xbf90e9dc (61200)) > [snapscan] usb_cmd(0,0x86819c8,10,0x86920f8,0xbf90e9dc (61200)) > [snapscan] usb_cmd: cmdlen=10, datalen=0 > [snapscan] usb_write: writing: 0x28 0x00 0x82 0x00 0x00 0x02 0x00 0xef > 0x10 0x00 > [snapscan] Written 10 bytes > [snapscan] usb_read: reading: 0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > [snapscan] usb_read Only 56864 bytes read > [snapscan] usb_read: reading: 0x42 0x43 0x3f 0x43 0x41 0x40 0x43 0x41 0x46 > 0x45 ... > [snapscan] Read 56864 bytes > [snapscan] read_calibration_data: snapscan_cmd command failed: Error during > device I/O > [snapscan] calibrate: read_calibration_data command failed: Error during > device I/O > [snapscan] sane_snapscan_start: calibration failed. > [snapscan] release_unit > [snapscan] snapscan_cmd > [snapscan] snapscani_usb_cmd(0,0xbf90e9e6,6,0x0,0x0 (0)) > [snapscan] atomic_usb_cmd(0,0xbf90e9e6,6,0x0,0x0 (0)) > [snapscan] usb_cmd(0,0xbf90e9e6,6,0x0,0x0 (0)) > [snapscan] usb_cmd: cmdlen=6, datalen=0 > [snapscan] usb_write: writing: 0x17 0x00 0x00 0x00 0x00 0x00 > [snapscan] Written 6 bytes > [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 > [snapscan] Read 8 bytes > scanimage: sane_start: Error during device I/O > [snapscan] sane_snapscan_cancel > [snapscan] >>>>>>>> killing reader_process <<<<<<<< > Stack overflow (`core' generated) > > > > -- > --- > Noe Nieto > NNieto Consulting Services > M: nnieto at noenieto.com > W: http://noenieto.com > T: @tzicatl <https://twitter.com/#%21/tzicatl> > Li: Perfil en LinkedIn <http://www.linkedin.com/profile/view?id=84300665> > > -- --- Noe Nieto NNieto Consulting Services M: nnieto at noenieto.com W: http://noenieto.com T: @tzicatl <https://twitter.com/#%21/tzicatl> Li: Perfil en LinkedIn <http://www.linkedin.com/profile/view?id=84300665> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20110718/a969e633/attachment-0001.html>
