Le mercredi 25 mai 2011 22:28:46 Sebastian Reinhardt, vous avez ?crit :
> Am 28.03.2011 21:27, schrieb stef:
> > Le Monday 28 March 2011 00:32:11 Sebastian Reinhardt, vous avez ?crit :
> >> Am 01.03.2011 06:59, schrieb stef:
> >>> Le Wednesday 23 February 2011 22:17:09 Sebastian Reinhardt, vous avez
> >>> ?crit : .....
> >>>
> >>>>> Hello,
> >>>>>
> >>>>> thanks for these tests. Now I think that the 700F isn't just a
clone
> >>>>> of
> >>>>>
> >>>>> LiDE 100/200 and specific structures must be tuned. The first thing
> >>>>> to do is to define specific GPIO description for this model and see
> >>>>> how it fares.
> >>>>>
> >>>>> Regards,
> >>>>>
> >>>>> Stef
> >>>>
> >>>> Ok, how can I help You to make it work?
> >>>>
> >>> Hello,
> >>>
> >>> the steps involved in adapting the backend would be to record the USB
> >>>
> >>> activity for a scan done under windows. Then process this log to
> >>> extract GPIO settings. A new GPIO define and a corresponding entry
> >>> must be defined in genesys_device.c . Then in genesys_gl847.c the
> >>> gl847_init_gpio function may be have to be adapted.
> >>>
> >>> To my opinion, there isn't much code to write but many tests to run in
> >>>
> >>> order to check that the cnages are working like expected. So this task
> >>> would be better done by someone owning a 700F like you.
> >>>
> >>> Regards,
> >>>
> >>> Stef
> >>
> >> Sorry, it took a while, but I have done it: I made log during scanning
> >> with winstone (some programms had some problems with xp). I have
> >> uploaded the log file of an 75dpi scan to this location:
> >>
> >> http://snr-solutions.de/UsbSnoop.log
> >>
> >> This file was generated by "SniffUSB-x86-2.0.0006".
> >>
> >> I hope this can help......
> >>
> >> So Stef, if there is a new version of sane-backend, then I will test it
> >> again.
> >>
> > Hello,
> >
> > one way to try to make support progress would be to run the decoding
> >
> > scripts I posted earlier on these logs, then compare how registers
> > related to GPIO are set and compare to a test run of the current backend
> > implementation. Then change code to handle the differences.
> >
> > Personnaly I haven't yet enough time to help for this model. Maybe at
> > the
> >
> > end of April.
> >
> > Regards,
> >
> > Stef
>
> Hi Stef,
> any news about this driver?
Hello,
I'm currently completing 2400/4800 dpi support for LiDE 200. I bug
fixing
a few things, so I haven't currently any time for the 700F. Maybe in about a
month.
Regards,
Stef
