Hi Trying to get my scanner working but not sure where to go next chris at chris-desktop:~$ sudo scanimage -L [sudo] password for chris:
No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). chris at chris-desktop:~$ ^C chris at chris-desktop:~$ sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. found SCSI scanner "CANON IX-12015E 1.07" at /dev/sg0 # Your SCSI scanner was detected. It may or may not be supported by SANE. Try # scanimage -L and read the backend's manpage. # No USB scanners found. If you expected something different, make sure that # you have loaded a kernel driver for your USB host controller and have setup # the USB system correctly. See man sane-usb for details. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary.
