That is an ancient version of sane-backends. Upgrade to 1.0.21. allan
On Sun, Dec 19, 2010 at 5:37 PM, Uttiya Chowdhury <chowdhury.uttiya at gmail.com> wrote: > Hi, > Gentoo 64 bit, kernel 2.6.34-r12. > == > epjitsu.conf: > firmware /usr/share/sane/epjitsu/300_0c00.nal > usb 0x04c5 0x1156 > == > sane-find-scanner: > found USB scanner (vendor=0x04c5 [FUJITSU], product=0x1156 [ScanSnap > S300]) at libusb:001:014 > == > media-gfx/sane-backends > Latest version available: 1.0.19-r2 > Latest version installed: 1.0.19-r2 > media-gfx/sane-frontends > Latest version available: 1.0.14 > Latest version installed: 1.0.14 > == > From xsane, if I hit the scan button, scanner draws in paper, but then > stops and after a couple of seconds, "Failed to start scanner: Error > during device I/O". > == > Any thoughts? > == > last few lines from: SANE_DEBUG_EPJITSU=30 scanimage -b --source="ADF > Duplex" --resolution 150 2> s300.log: > ... > ... > [epjitsu] 4000 58 3f 4d 58 40 4d 58 40 4d 58 40 4d 58 40 4d 58 > [epjitsu] 4010 3f 4d 58 40 4d 57 40 4d 57 40 4d 58 40 4d 58 40 > [epjitsu] 4020 4e 58 40 4d 58 40 4d 58 40 4d 58 40 4d 57 40 4d > [epjitsu] 4030 58 40 4d 58 40 4d 58 40 4d 57 3f 4d 57 3f 4d 57 > [epjitsu] 4040 3f 4d 58 3f 4d 58 40 4d 57 40 4d 59 40 4d 58 40 > [epjitsu] 4050 4d 58 40 4d 58 40 4d 57 40 4d 57 40 4d 58 40 4d > [epjitsu] 4060 58 40 4d 57 40 4d 58 40 4d 58 40 4d 58 40 4d 58 > [epjitsu] 4070 40 4d 58 40 4d 58 40 4d 58 40 4d 58 40 4d 58 3f > [epjitsu] 4080 4c 58 40 4d 57 40 4d 57 40 4d 58 40 4d 58 40 4d > [epjitsu] 4090 58 40 4d 58 40 4d 58 40 4e 58 40 4d 57 40 4d 58 > [epjitsu] 40a0 40 4d 58 40 4d 58 3f 4d 58 40 4d 58 40 4d 58 40 > [epjitsu] 40b0 4d 58 40 4d 57 40 4d 58 40 4d 58 40 4d 58 3f 4d > [epjitsu] 40c0 57 40 4d 58 40 4d 58 3f 4c 58 40 4d 58 40 4d 58 > [epjitsu] 40d0 40 4d 58 3f 4d 58 40 4d 58 3f 4d 57 40 4d 58 40 > [epjitsu] 40e0 4d 58 40 4d 58 40 4d 58 40 4d 57 3f 4d 58 3f 4d > [epjitsu] 40f0 58 40 4d 58 40 4d 58 40 4d 58 40 4d 58 40 4d 57 > [epjitsu] 4100 40 4d 58 40 4d 57 3f 4d 57 40 4d 58 3f 4d 57 40 > [epjitsu] 4110 02 10 41 00 00 00 80 00 > [epjitsu] in: short read 25544/16664 > [epjitsu] do_cmd: finish > [epjitsu] read_from_scanner: got GOOD/EOF (16664) > [epjitsu] read_from_scanner: finish rB:8880 len:16664 > [epjitsu] read_from_scanner: start rB:8880 len:8880 > [epjitsu] do_cmd: start > [epjitsu] in: memset 8880 bytes > [epjitsu] in: reading 8880 bytes, timeout 10000 > [epjitsu] in: retVal 9 > [epjitsu] in: return error 'Error during device I/O' > [epjitsu] read_from_scanner: error reading status = 9 > [epjitsu] read_from_scanner: finish rB:8880 len:0 > [epjitsu] coarsecal: cant read from scanner > [epjitsu] sane_start: ERROR: failed to coarsecal > [epjitsu] sane_cancel: start > [epjitsu] sane_cancel: finish > scanimage: sane_start: Error during device I/O > [epjitsu] sane_cancel: start > [epjitsu] sane_cancel: finish > [epjitsu] sane_close: start > [epjitsu] sane_cancel: start > [epjitsu] sane_cancel: finish > [epjitsu] lamp: start (0) > [epjitsu] do_cmd: start > [epjitsu] cmd: writing 2 bytes, timeout 10000 > [epjitsu] cmd: >> > [epjitsu] 000: 1b d0 > [epjitsu] cmd: wrote 2 bytes, retVal 0 > [epjitsu] in: memset 1 bytes > [epjitsu] in: reading 1 bytes, timeout 10000 > [epjitsu] in: retVal 0 > [epjitsu] in: read 1 bytes > [epjitsu] in: << > [epjitsu] 000: 06 > [epjitsu] do_cmd: finish > [epjitsu] do_cmd: start > [epjitsu] cmd: writing 1 bytes, timeout 10000 > [epjitsu] cmd: >> > [epjitsu] 000: 00 > [epjitsu] cmd: wrote 1 bytes, retVal 0 > [epjitsu] in: memset 1 bytes > [epjitsu] in: reading 1 bytes, timeout 10000 > [epjitsu] in: retVal 0 > [epjitsu] in: read 1 bytes > [epjitsu] in: << > [epjitsu] 000: 06 > [epjitsu] do_cmd: finish > [epjitsu] lamp: finish > [epjitsu] disconnect_fd: start > [epjitsu] disconnecting usb device > [epjitsu] disconnect_fd: finish > [epjitsu] teardown_buffers: start > [epjitsu] teardown_buffers: finish > [epjitsu] sane_close: finish > [epjitsu] sane_exit: start > === > > -- > sane-devel mailing list: sane-devel at lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > ? ? ? ? ? ? to sane-devel-request at lists.alioth.debian.org > -- "The truth is an offense, but not a sin"
