Olaf, On Sunday, December 05, 2010 05:44:34 pm Olaf Meeuwissen wrote: > Unfortunately, in your attempts to trim the logs a bit you chomped the > interesting part. However, Julien's detective work showed that before > commit 63a8dd4ebc9535b23d7a922cb0e7a9a682edd955 the backend completely > ignored the error code at the end of each image data block. Obviously, > that'll work just fine if there are no errors so you get a good scan > with the 1.0.20 version.
In the full logs there never was an error code. It simple repeated a line line this: [epson2] buf[113] ff . for 15 MB. The only difference between each line was the number inside the brackets. Periodically there was also a line that would look like this: [epson2] .. > For the time being, I suggest you stick with sane-backends 1.0.20 or try > the epkowa backend that comes with Image Scan! for Linux. See sane-backends 1.0.20 is a difficult long-term solution because it breaks udev on my system. I am hopeful that the fix you have already recommended will solve this problem. I will also take a look at epkowa. Soren -- Soren Stoutner 623-262-6169 soren at stoutner.com -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: This is a digitally signed message part. URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20101211/8944ccad/attachment.pgp>
