Sorry for the trouble- This unit was very well tested during the development of the driver, so it should work.
There have been quite a number of changes since sane-backends 1.0.20 came out, so my first suggestion would be to upgrade to 1.0.21. See if you can find a package for that. If not, it is easy to compile from source. Let us know if you want pointers. allan On Mon, Jun 14, 2010 at 12:20 PM, J F <jqford at hotmail.com> wrote: > Hello- > > SANE newbie question:? Recently installed Ubuntu 10.04 and want to use my > Canon DR-2580C.? I've tried the Simple Scan front end - but that interface > just says "failed to scan" - although it recognizes that I have a DR-2580C. > > I tried running SANE from the terminal, and get the following (I've omitted > a couple lines, indicated by ellipsis). > > Any suggestions are greatly appreciated. > > user at xxxx:~$ sane-find-scanner > ... > found USB scanner (vendor=0x04a9, product=0x1608) at libusb:001:010 > > user at xxxx:~$ scanimage -L > device `canon_dr:libusb:001:010' is a CANON DR-2580C scanner > > user at xxxx:~$ scanimage -T > scanimage: sane_start: Invalid argument > user at xxxx:~$ SANE_DEBUG_CANON_DR=255 scanimage -T 2>error.log > > Here are the results of error.log from running 'scanimage -T': > > [sanei_debug] Setting debug level of canon_dr to 255. > [canon_dr] sane_init: start > [canon_dr] sane_init: canon_dr backend 1.0.26, from sane-backends 1.0.20 > [canon_dr] sane_init: finish > [canon_dr] sane_get_devices: start > [canon_dr] sane_get_devices: reading config file canon_dr.conf > [canon_dr] sane_get_devices: looking for 'scsi CANON CR' > [canon_dr] sane_get_devices: looking for 'scsi CANON DR' > [canon_dr] sane_get_devices: setting "vendor-name" to CANON > [canon_dr] sane_get_devices: setting "model-name" to DR-2080C > [canon_dr] sane_get_devices: setting "version-name" to XXXX > [canon_dr] sane_get_devices: setting "padded-read" to 1 > [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1601' > [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1602' > [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1603' > [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1604' > [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1606' > [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1607' > [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1608' > [canon_dr] attach_one: start > [canon_dr] attach_one: looking for 'libusb:001:010' > [canon_dr] connect_fd: start > [canon_dr] connect_fd: opening USB device > [canon_dr] wait_scanner: start > [canon_dr] do_usb_cmd: start > [canon_dr] cmd: writing 24 bytes, timeout 500 > [canon_dr] cmd: >> > [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00 > ................ > [canon_dr] 010: 00 00 00 00 00 00 00 00 > ........ > [canon_dr] cmd: wrote 24 bytes, retVal 0 > [canon_dr] stat: reading 4 bytes, timeout 500 > [canon_dr] stat: read 4 bytes, retval 0 > [canon_dr] stat: << > [canon_dr] 000: 00 00 00 00 > .... > [canon_dr] do_usb_cmd: finish > [canon_dr] do_usb_cmd: start > [canon_dr] cmd: writing 24 bytes, timeout 500 > [canon_dr] cmd: >> > [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00 > ................ > [canon_dr] 010: 00 00 00 00 00 00 00 00 > ........ > [canon_dr] cmd: wrote 24 bytes, retVal 0 > [canon_dr] stat: reading 4 bytes, timeout 500 > [canon_dr] stat: read 4 bytes, retval 0 > [canon_dr] stat: << > [canon_dr] 000: 00 00 00 00 > .... > [canon_dr] do_usb_cmd: finish > [canon_dr] wait_scanner: finish > [canon_dr] connect_fd: finish > [canon_dr] init_inquire: start > [canon_dr] do_usb_cmd: start > [canon_dr] cmd: writing 24 bytes, timeout 30000 > [canon_dr] cmd: >> > [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 12 00 00 00 > ................ > [canon_dr] 010: 30 00 00 00 00 00 00 00 > 0....... > [canon_dr] cmd: wrote 24 bytes, retVal 0 > [canon_dr] in: reading 48 bytes, timeout 30000 > [canon_dr] in: read 48 bytes, retval 0 > [canon_dr] in: << > [canon_dr] 000: 06 00 02 02 3b 00 00 10 43 41 4e 4f 4e 20 20 20 > ....;...CANON > [canon_dr] 010: 44 52 2d 32 35 38 30 43 20 20 20 20 20 20 20 20 > DR-2580C > [canon_dr] 020: 32 2e 30 38 00 00 00 00 32 30 30 36 31 30 30 33 > 2.08....20061003 > [canon_dr] stat: reading 4 bytes, timeout 30000 > [canon_dr] stat: read 4 bytes, retval 0 > [canon_dr] stat: << > [canon_dr] 000: 00 00 00 00 > .... > [canon_dr] do_usb_cmd: finish > [canon_dr] init_inquire: Found CANON scanner DR-2580C version 2.08 at > libusb:001:010 > [canon_dr] init_inquire: finish > [canon_dr] init_vpd: start > [canon_dr] do_usb_cmd: start > [canon_dr] cmd: writing 24 bytes, timeout 30000 > [canon_dr] cmd: >> > [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 12 01 f0 00 > ................ > [canon_dr] 010: 1e 00 00 00 00 00 00 00 > ........ > [canon_dr] cmd: wrote 24 bytes, retVal 0 > [canon_dr] in: reading 30 bytes, timeout 30000 > [canon_dr] in: read 30 bytes, retval 0 > [canon_dr] in: << > [canon_dr] 000: 06 f0 02 00 2b 02 58 02 58 00 02 58 02 58 00 64 > ....+.X.X..X.X.d > [canon_dr] 010: 00 64 29 d4 00 00 13 f0 00 00 20 d0 fe 00?????? .d)....... > ... > [canon_dr] stat: reading 4 bytes, timeout 30000 > [canon_dr] stat: read 4 bytes, retval 0 > [canon_dr] stat: << > [canon_dr] 000: 00 00 00 00 > .... > [canon_dr] do_usb_cmd: finish > [canon_dr] init_vpd: length=2b > [canon_dr] standard options > [canon_dr]?? basic x res: 600 dpi > [canon_dr]?? basic y res: 600 dpi > [canon_dr]?? step x res: 0 dpi > [canon_dr]?? step y res: 0 dpi > [canon_dr]?? max x res: 600 dpi > [canon_dr]?? max y res: 600 dpi > [canon_dr]?? min x res: 100 dpi > [canon_dr]?? min y res: 100 dpi > [canon_dr]?? 60 dpi: 0 > [canon_dr]?? 75 dpi: 0 > [canon_dr]?? 100 dpi: 1 > [canon_dr]?? 120 dpi: 0 > [canon_dr]?? 150 dpi: 1 > [canon_dr]?? 160 dpi: 0 > [canon_dr]?? 180 dpi: 0 > [canon_dr]?? 200 dpi: 1 > [canon_dr]?? 240 dpi: 1 > [canon_dr]?? 300 dpi: 1 > [canon_dr]?? 320 dpi: 0 > [canon_dr]?? 400 dpi: 1 > [canon_dr]?? 480 dpi: 0 > [canon_dr]?? 600 dpi: 1 > [canon_dr]?? 800 dpi: 0 > [canon_dr]?? 1200 dpi: 0 > [canon_dr]?? max width: 8.51 inches > [canon_dr]?? max length: 14.00 inches > [canon_dr]?? AWD: 1 > [canon_dr]?? CE Emphasis: 1 > [canon_dr]?? C Emphasis: 1 > [canon_dr]?? High quality: 1 > [canon_dr]?? grayscale: 1 > [canon_dr]?? halftone: 1 > [canon_dr]?? monochrome: 1 > [canon_dr]?? overflow: 0 > [canon_dr] init_vpd: finish > [canon_dr] init_model: start > [canon_dr] init_model: finish > [canon_dr] init_panel: start > [canon_dr] read_panel: start > [canon_dr] read_panel: running > [canon_dr] do_usb_cmd: start > [canon_dr] cmd: writing 24 bytes, timeout 30000 > [canon_dr] cmd: >> > [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 28 00 84 00 > ............(... > [canon_dr] 010: 00 00 00 00 08 00 00 00 > ........ > [canon_dr] cmd: wrote 24 bytes, retVal 0 > [canon_dr] in: reading 8 bytes, timeout 30000 > [canon_dr] in: read 8 bytes, retval 0 > [canon_dr] in: << > [canon_dr] 000: 00 00 01 00 00 00 00 00 > ........ > [canon_dr] stat: reading 4 bytes, timeout 30000 > [canon_dr] stat: read 4 bytes, retval 0 > [canon_dr] stat: << > [canon_dr] 000: 00 00 00 00 > .... > [canon_dr] do_usb_cmd: finish > [canon_dr] read_panel: finish > [canon_dr] send_panel: start > [canon_dr] do_usb_cmd: start > [canon_dr] cmd: writing 24 bytes, timeout 30000 > [canon_dr] cmd: >> > [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 2a 00 84 00 > ............*... > [canon_dr] 010: 00 00 00 00 08 00 00 00 > ........ > [canon_dr] cmd: wrote 24 bytes, retVal 0 > [canon_dr] out: writing 20 bytes, timeout 30000 > [canon_dr] out: >> > [canon_dr] 000: 00 00 00 10 00 02 b0 00 00 00 00 00 00 00 01 00 > ................ > [canon_dr] 010: 00 00 00 00 > .... > [canon_dr] out: wrote 20 bytes, retVal 0 > [canon_dr] stat: reading 4 bytes, timeout 30000 > [canon_dr] stat: read 4 bytes, retval 0 > [canon_dr] stat: << > [canon_dr] 000: 00 00 00 00 > .... > [canon_dr] do_usb_cmd: finish > [canon_dr] send_panel: finish 0 > [canon_dr] init_panel: finish > [canon_dr] init_user: start > [canon_dr] init_user: finish > [canon_dr] init_options: start > [canon_dr] init_options: finish > [canon_dr] disconnect_fd: start > [canon_dr] disconnecting usb device > [canon_dr] disconnect_fd: finish > [canon_dr] attach_one: finish > [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x1609' > [canon_dr] sane_get_devices: setting "vendor-name" to CANON > [canon_dr] sane_get_devices: setting "model-name" to DR-2050C > [canon_dr] sane_get_devices: setting "version-name" to XXXX > [canon_dr] sane_get_devices: setting "padded-read" to 1 > [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x160a' > [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x160b' > [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x160c' > [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x160f' > [canon_dr] sane_get_devices: looking for 'usb 0x04a9 0x2222' > [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1614' > [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1617' > [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1618' > [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x161a' > [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x161b' > [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x161d' > [canon_dr] sane_get_devices: looking for 'usb 0x1083 0x1620' > [canon_dr] sane_get_devices: found scanner libusb:001:010 > [canon_dr] sane_get_devices: found 1 scanner(s) > [canon_dr] sane_get_devices: finish > [canon_dr] sane_open: start > [canon_dr] sane_open: searching currently attached scanners > [canon_dr] sane_open: device libusb:001:010 requested > [canon_dr] sane_open: device libusb:001:010 found > [canon_dr] connect_fd: start > [canon_dr] connect_fd: opening USB device > [canon_dr] wait_scanner: start > [canon_dr] do_usb_cmd: start > [canon_dr] cmd: writing 24 bytes, timeout 500 > [canon_dr] cmd: >> > [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00 > ................ > [canon_dr] 010: 00 00 00 00 00 00 00 00 > ........ > [canon_dr] cmd: wrote 24 bytes, retVal 0 > [canon_dr] stat: reading 4 bytes, timeout 500 > [canon_dr] stat: read 4 bytes, retval 0 > [canon_dr] stat: << > [canon_dr] 000: 00 00 00 00 > .... > [canon_dr] do_usb_cmd: finish > [canon_dr] do_usb_cmd: start > [canon_dr] cmd: writing 24 bytes, timeout 500 > [canon_dr] cmd: >> > [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00 > ................ > [canon_dr] 010: 00 00 00 00 00 00 00 00 > ........ > [canon_dr] cmd: wrote 24 bytes, retVal 0 > [canon_dr] stat: reading 4 bytes, timeout 500 > [canon_dr] stat: read 4 bytes, retval 0 > [canon_dr] stat: << > [canon_dr] 000: 00 00 00 00 > .... > [canon_dr] do_usb_cmd: finish > [canon_dr] wait_scanner: finish > [canon_dr] connect_fd: finish > [canon_dr] sane_open: finish > [canon_dr] sane_get_option_descriptor: 0 > [canon_dr] sane_control_option: get value for '' (0) > [canon_dr] sane_get_option_descriptor: 0 > [canon_dr] sane_control_option: get value for '' (0) > [canon_dr] sane_get_option_descriptor: 1 > [canon_dr] sane_get_option_descriptor: 2 > [canon_dr] sane_get_option_descriptor: 3 > [canon_dr] sane_get_option_descriptor: 4 > [canon_dr] sane_get_option_descriptor: 5 > [canon_dr] sane_get_option_descriptor: 6 > [canon_dr] sane_get_option_descriptor: 7 > [canon_dr] sane_get_option_descriptor: 8 > [canon_dr] sane_get_option_descriptor: 9 > [canon_dr] sane_get_option_descriptor: 10 > [canon_dr] sane_get_option_descriptor: 11 > [canon_dr] sane_get_option_descriptor: 12 > [canon_dr] sane_get_option_descriptor: 13 > [canon_dr] sane_get_option_descriptor: 14 > [canon_dr] sane_get_option_descriptor: 15 > [canon_dr] sane_get_option_descriptor: 16 > [canon_dr] sane_get_option_descriptor: 17 > [canon_dr] sane_get_option_descriptor: 18 > [canon_dr] sane_get_option_descriptor: 19 > [canon_dr] sane_get_option_descriptor: 20 > [canon_dr] sane_get_option_descriptor: 21 > [canon_dr] sane_get_option_descriptor: 22 > [canon_dr] sane_get_option_descriptor: 23 > [canon_dr] sane_get_option_descriptor: 24 > [canon_dr] sane_get_option_descriptor: 25 > [canon_dr] sane_get_option_descriptor: 26 > [canon_dr] sane_get_option_descriptor: 27 > [canon_dr] sane_get_option_descriptor: 28 > [canon_dr] sane_get_option_descriptor: 29 > [canon_dr] sane_get_option_descriptor: 30 > [canon_dr] sane_get_option_descriptor: 31 > [canon_dr] sane_get_option_descriptor: 32 > [canon_dr] sane_get_option_descriptor: 33 > [canon_dr] sane_get_option_descriptor: 34 > [canon_dr] sane_control_option: get value for 'br-x' (9) > [canon_dr] sane_control_option: get value for 'tl-x' (7) > [canon_dr] sane_control_option: get value for 'br-y' (10) > [canon_dr] sane_control_option: get value for 'tl-y' (8) > [canon_dr] sane_control_option: get value for 'tl-x' (7) > [canon_dr] sane_get_option_descriptor: 9 > [canon_dr] sane_control_option: set value for 'br-x' (9) > [canon_dr] sane_control_option: get value for 'tl-y' (8) > [canon_dr] sane_get_option_descriptor: 10 > [canon_dr] sane_control_option: set value for 'br-y' (10) > [canon_dr] sane_start: start > [canon_dr] started=0, side=0, source=1 > [canon_dr] sane_get_parameters: start > [canon_dr] sane_get_parameters: not started, updating > [canon_dr] sane_get_parameters: x: max=10208, page=10200, gpw=10200, res=600 > [canon_dr] sane_get_parameters: y: max=16800, page=13200, gph=13200, res=600 > [canon_dr] sane_get_parameters: area: tlx=0, brx=10200, tly=0, bry=13200 > [canon_dr] sane_get_parameters: params: ppl=5096, Bpl=637, lines=6600 > [canon_dr] sane_get_parameters: params: format=0, depth=1, last=1 > [canon_dr] sane_get_parameters: finish > [canon_dr] object_position: start > [canon_dr] object_position: eject > [canon_dr] do_usb_cmd: start > [canon_dr] cmd: writing 24 bytes, timeout 30000 > [canon_dr] cmd: >> > [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 31 00 00 00 > ............1... > [canon_dr] 010: 00 00 00 00 00 00 00 00 > ........ > [canon_dr] cmd: wrote 24 bytes, retVal 0 > [canon_dr] stat: reading 4 bytes, timeout 30000 > [canon_dr] stat: read 4 bytes, retval 0 > [canon_dr] stat: << > [canon_dr] 000: 00 00 00 00 > .... > [canon_dr] do_usb_cmd: finish > [canon_dr] wait_scanner: start > [canon_dr] do_usb_cmd: start > [canon_dr] cmd: writing 24 bytes, timeout 500 > [canon_dr] cmd: >> > [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00 > ................ > [canon_dr] 010: 00 00 00 00 00 00 00 00 > ........ > [canon_dr] cmd: wrote 24 bytes, retVal 0 > [canon_dr] stat: reading 4 bytes, timeout 500 > [canon_dr] stat: read 4 bytes, retval 0 > [canon_dr] stat: << > [canon_dr] 000: 00 00 00 00 > .... > [canon_dr] do_usb_cmd: finish > [canon_dr] do_usb_cmd: start > [canon_dr] cmd: writing 24 bytes, timeout 500 > [canon_dr] cmd: >> > [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 00 00 00 00 > ................ > [canon_dr] 010: 00 00 00 00 00 00 00 00 > ........ > [canon_dr] cmd: wrote 24 bytes, retVal 0 > [canon_dr] stat: reading 4 bytes, timeout 500 > [canon_dr] stat: read 4 bytes, retval 0 > [canon_dr] stat: << > [canon_dr] 000: 00 00 00 00 > .... > [canon_dr] do_usb_cmd: finish > [canon_dr] wait_scanner: finish > [canon_dr] object_position: finish > [canon_dr] set_window: start > [canon_dr] do_usb_cmd: start > [canon_dr] cmd: writing 24 bytes, timeout 30000 > [canon_dr] cmd: >> > [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 24 00 00 00 > ............$... > [canon_dr] 010: 00 00 00 00 34 00 00 00 > ....4... > [canon_dr] cmd: wrote 24 bytes, retVal 0 > [canon_dr] out: writing 64 bytes, timeout 30000 > [canon_dr] out: >> > [canon_dr] 000: 00 00 00 3c 00 02 b0 00 00 00 00 00 00 00 00 00 > ...<............ > [canon_dr] 010: 00 00 00 2c 00 00 02 58 02 58 00 00 00 04 ff ff > ...,...X.X...... > [canon_dr] 020: ff ff 00 00 27 d0 00 00 33 90 80 80 80 00 01 00 > ....'...3....... > [canon_dr] 030: 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > ................ > [canon_dr] out: wrote 64 bytes, retVal 0 > [canon_dr] stat: reading 4 bytes, timeout 30000 > [canon_dr] stat: read 0 bytes, retval 5 > [canon_dr] stat: << > [canon_dr] > [canon_dr] stat: clearing error 'End of file reached' > [canon_dr] do_usb_clear: start > [canon_dr] rs sub call >> > [canon_dr] do_usb_cmd: start > [canon_dr] cmd: writing 24 bytes, timeout 30000 > [canon_dr] cmd: >> > [canon_dr] 000: 00 00 00 14 00 01 90 00 00 00 00 00 03 00 00 00 > ................ > [canon_dr] 010: 0e 00 00 00 00 00 00 00 > ........ > [canon_dr] cmd: wrote 24 bytes, retVal 0 > [canon_dr] in: reading 14 bytes, timeout 30000 > [canon_dr] in: read 14 bytes, retval 0 > [canon_dr] in: << > [canon_dr] 000: f0 00 05 00 00 00 00 06 00 00 00 00 26 00 > ............&. > [canon_dr] stat: reading 4 bytes, timeout 30000 > [canon_dr] stat: read 4 bytes, retval 0 > [canon_dr] stat: << > [canon_dr] 000: 00 00 00 00 > .... > [canon_dr] do_usb_cmd: finish > [canon_dr] rs sub call << > [canon_dr] sense_handler: start > [canon_dr] Sense=0x5, ASC=0x26, ASCQ=00, EOM=0, ILI=0, info=00000000 > [canon_dr] Illegal request: invalid field in parm list > [canon_dr] do_usb_clear: finish after RS > [canon_dr] stat: bad RS status, 4 > [canon_dr] set_window: finish > [canon_dr] sane_start: ERROR: cannot set window > scanimage: sane_start: Invalid argument > [canon_dr] sane_cancel: start > [canon_dr] sane_cancel: finish > [canon_dr] sane_close: start > [canon_dr] disconnect_fd: start > [canon_dr] disconnecting usb device > [canon_dr] disconnect_fd: finish > [canon_dr] sane_close: finish > [canon_dr] sane_exit: start > [canon_dr] disconnect_fd: start > [canon_dr] disconnect_fd: finish > [canon_dr] sane_exit: finish > > > > > -- > sane-devel mailing list: sane-devel at lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > ? ? ? ? ? ? to sane-devel-request at lists.alioth.debian.org > -- "The truth is an offense, but not a sin"
