Hi Allan, unfotunately this doesn't seem to a permissions issue. If I try it as root, the problem persists.
Albrecht Am Donnerstag, den 07.01.2010, 10:02 -0500 schrieb m. allan noah: > did you try it as root, just in case it is a permissions issue? > > allan > > On Thu, Jan 7, 2010 at 4:17 AM, Albrecht Beck <albrecht.beck at arcor.de> > wrote: > > Hi, > > > > I'm trying to get the Umax 2000U running with Ubuntu 9.10. Unfortunately > > it doesn't work: > > > > albrecht at calculus:~$ lsusb > > Bus 005 Device 002: ID 1606:0030 Umax [hex] Astra 2000U > > Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > > > albrecht at calculus:~$ sane-find-scanner > > > > # sane-find-scanner will now attempt to detect your scanner. If the > > # result is different from what you expected, first make sure your > > # scanner is powered up and properly connected to your computer. > > > > # No SCSI scanners found. If you expected something different, make > > sure that > > # you have loaded a kernel SCSI driver for your SCSI adapter. > > > > found USB scanner (vendor=0x1606, product=0x0030, chip=PV8630/LM9830) at > > libusb:005:002 > > # Your USB scanner was (probably) detected. It may or may not be > > supported by > > # SANE. Try scanimage -L and read the backend's manpage. > > > > # Not checking for parallel port scanners. > > > > # Most Scanners connected to the parallel port or other proprietary > > ports > > # can't be detected by this program. > > > > # You may want to run this program as root to find all devices. Once > > you > > # found the scanner devices, be sure to adjust access permissions as > > # necessary. > > > > albrecht at calculus:~$ SANE_DEBUG_UMAX1220U=128 scanimage -L > > > > [sanei_debug] Setting debug level of umax1220u to 128. > > [umax1220u] sane_init: version_code != 0, authorize != 0 > > [umax1220u] sane_init: SANE umax1220u backend version 1.0.2 from > > sane-backends 1.0.20 > > [umax1220u] reading configure file umax1220u.conf > > [umax1220u] attach_matching_devices(usb 0x1606 0x0010) > > [umax1220u] attach_matching_devices(usb 0x1606 0x0030) > > [umax1220u] attach_scanner: libusb:005:002 > > [umax1220u] attach_scanner: opening libusb:005:002 > > [umax1220u] UMAX_open_device: `libusb:005:002' > > [umax1220u] UMAX_open_device: Scanner is a 2000U. Expect color > > problems :) > > [umax1220u] csend: cmd = 0 > > [umax1220u] usync: len = 0, cmd = 0 > > [umax1220u] Failure on line of umax1220u-common.c: 394 > > [umax1220u] UMAX_close_device: > > [umax1220u] Failure on line of umax1220u-common.c: 2359 > > [umax1220u] ERROR: attach_scanner: opening libusb:005:002 failed > > [umax1220u] attach_matching_devices(usb 0x1606 0x0130) > > [umax1220u] attach_matching_devices(/dev/scanner) > > [umax1220u] attach_scanner: /dev/scanner > > [umax1220u] attach_scanner: opening /dev/scanner > > [umax1220u] UMAX_open_device: `/dev/scanner' > > [umax1220u] UMAX_open_device: couldn't open device `/dev/scanner': > > Invalid argument > > [umax1220u] ERROR: attach_scanner: opening /dev/scanner failed > > [umax1220u] attach_matching_devices(/dev/usb/scanner0) > > [umax1220u] attach_scanner: /dev/usb/scanner0 > > [umax1220u] attach_scanner: opening /dev/usb/scanner0 > > [umax1220u] UMAX_open_device: `/dev/usb/scanner0' > > [umax1220u] UMAX_open_device: couldn't open device `/dev/usb/scanner0': > > Invalid argument > > [umax1220u] ERROR: attach_scanner: opening /dev/usb/scanner0 failed > > [umax1220u] finished reading configure file > > [umax1220u] sane_get_devices(local_only = 0) > > [umax1220u] sane_exit > > > > > > > > Can anybody help? > > > > Regards, > > Albrecht > > > > > > > > > > > > -- > > sane-devel mailing list: sane-devel at lists.alioth.debian.org > > http://lists.alioth.debian.org/mailman/listinfo/sane-devel > > Unsubscribe: Send mail with subject "unsubscribe your_password" > > to sane-devel-request at lists.alioth.debian.org > > > > > -- Albrecht Beck Martin-Luther-Stra?e 21 71277 Rutesheim albrecht.beck at arcor.de
