In order to facilitate investigations on this: do you successfully scan with an usb cable ?
Nicolas Le vendredi 24 avril 2009 ? 23:30 +0200, Phil Wooding a ?crit : > Hi, > > I am trying to get the latest svn code working with a MP600R. > The scanner is properly detected, it starts scanning, but then > nothing... > Any help would be apreciated as it should work according to the > documentation. > > Thanks, > > Phil > > Here are the logs with maximum debug information: > > [pixma] bjnp_set_timeout(requested 10000, set 20000): > [pixma] bjnp_read_bulk(0, bufferptr, 0x8 = -1075284088) > [pixma] bjnp_read_bulk: 0x0 = 0 bytes available at start, Short block > = 0 blocksize = 0x400 = 1024 > [pixma] So far received 0x0 bytes = 0, need 0x8 = 8 > [pixma] No (more) scanner data available, requesting more > [pixma] bjnp_send_read_req sending command > [pixma] 00000000:42 4a 4e 50 02 20 00 00 00 0b 00 09 00 00 00 00 > [pixma] bjnp_recv_header: receiving response header > [pixma] TCP response header(scanner data = 8 bytes): > [pixma] 00000000:42 4a 4e 50 82 20 00 00 00 0b 00 09 00 00 00 08 > [pixma] Scanner reports 0x8 = 8 bytes available > [pixma] reading 0x8 = 8 (of max 0x8 = 8) bytes more > [pixma] bjnp_recv_data: receiving response data > [pixma] bjnp_recv_data: read response payload (8 bytes max) > [pixma] Received TCP response payload (8 bytes): > [pixma] 00000000:06 06 00 00 00 00 00 00 > [pixma] IN T=6.235 len=8 > [pixma] 00000000:06 06 00 00 00 00 00 00 > [pixma] > [pixma] bjnp_set_timeout(requested 10000, set 20000): > [pixma] bjnp_write_bulk(0, bufferptr, 0x40 = 64) > [pixma] bjnp_write: sending 0x40 = 64 bytes > [pixma] 00000000:42 4a 4e 50 02 21 00 00 00 0c 00 09 00 00 00 40 > [pixma] 00000010:de 20 00 00 00 00 00 00 00 00 00 00 00 00 00 30 > [pixma] 00000020:00 00 00 00 80 4b 80 4b 00 00 00 00 00 00 00 00 > [pixma] 00000030:00 00 02 80 00 00 03 6d 08 18 00 00 00 00 00 00 > [pixma] 00000040:ff 00 00 81 00 00 02 01 00 00 00 00 00 00 00 d5 > [pixma] bjnp_recv_header: receiving response header > [pixma] TCP response header(scanner data = 4 bytes): > [pixma] 00000000:42 4a 4e 50 82 21 00 00 00 0c 00 09 00 00 00 04 > [pixma] bjnp_recv_data: receiving response data > [pixma] bjnp_recv_data: read response payload (4 bytes max) > [pixma] Received TCP response payload (4 bytes): > [pixma] 00000000:00 00 00 40 > [pixma] OUT T=6.240 len=64 > [pixma] 00000000:de 20 00 00 00 00 00 00 00 00 00 00 00 00 00 30 > [pixma] 00000010:00 00 00 00 80 4b 80 4b 00 00 00 00 00 00 00 00 > [pixma] 00000020:00 00 02 80 00 00 03 6d 08 18 00 00 00 00 00 00 > [pixma] 00000030:ff 00 00 81 00 00 02 01 00 00 00 00 00 00 00 d5 > [pixma] > [pixma] bjnp_set_timeout(requested 10000, set 20000): > [pixma] bjnp_read_bulk(0, bufferptr, 0x8 = -1075284088) > [pixma] bjnp_read_bulk: 0x0 = 0 bytes available at start, Short block > = 0 blocksize = 0x400 = 1024 > [pixma] So far received 0x0 bytes = 0, need 0x8 = 8 > [pixma] No (more) scanner data available, requesting more > [pixma] bjnp_send_read_req sending command > [pixma] 00000000:42 4a 4e 50 02 20 00 00 00 0d 00 09 00 00 00 00 > [pixma] bjnp_recv_header: receiving response header > [pixma] bjnp_recv_header: could not read response header (select timed > out): Success! > [pixma] IN T=26.257 len=-9 > [pixma] ERROR: ETIMEDOUT > > > ______________________________________________________________________ > What can you do with the new Windows Live? Find out > -- > sane-devel mailing list: sane-devel at lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > to sane-devel-request at lists.alioth.debian.org
