it is supported, upgrade to sane cvs. http://www.sane-project.org/lists/sane-backends-cvs.html#S-HP3900
allan On Sun, Feb 22, 2009 at 11:50 AM, Peter Hoyer <peter.hoyer at gmx.de> wrote: > I would appreciate the support of the hp scanjet G 2710 by the sane project > and enclose the following output of the sane-find-scanner: > > kind regards > > Peter > > cat /proc/bus/usb/devices find nothing > > This is sane-find-scanner from sane-backends 1.0.19 > > # sane-find-scanner will now attempt to detect your scanner. If the > # result is different from what you expected, first make sure your > # scanner is powered up and properly connected to your computer. > > searching for SCSI scanners: > checking /dev/scanner... failed to open (Invalid argument) > checking /dev/sg0... failed to open (Invalid argument) > checking /dev/sg1... failed to open (Invalid argument) > checking /dev/sg2... failed to open (Invalid argument) > checking /dev/sg3... failed to open (Invalid argument) > checking /dev/sg4... failed to open (Invalid argument) > checking /dev/sg5... failed to open (Invalid argument) > checking /dev/sg6... failed to open (Invalid argument) > checking /dev/sg7... failed to open (Invalid argument) > checking /dev/sg8... failed to open (Invalid argument) > checking /dev/sg9... failed to open (Invalid argument) > checking /dev/sga... failed to open (Invalid argument) > checking /dev/sgb... failed to open (Invalid argument) > checking /dev/sgc... failed to open (Invalid argument) > checking /dev/sgd... failed to open (Invalid argument) > checking /dev/sge... failed to open (Invalid argument) > checking /dev/sgf... failed to open (Invalid argument) > checking /dev/sgg... failed to open (Invalid argument) > checking /dev/sgh... failed to open (Invalid argument) > checking /dev/sgi... failed to open (Invalid argument) > checking /dev/sgj... failed to open (Invalid argument) > checking /dev/sgk... failed to open (Invalid argument) > checking /dev/sgl... failed to open (Invalid argument) > checking /dev/sgm... failed to open (Invalid argument) > checking /dev/sgn... failed to open (Invalid argument) > checking /dev/sgo... failed to open (Invalid argument) > checking /dev/sgp... failed to open (Invalid argument) > checking /dev/sgq... failed to open (Invalid argument) > checking /dev/sgr... failed to open (Invalid argument) > checking /dev/sgs... failed to open (Invalid argument) > checking /dev/sgt... failed to open (Invalid argument) > checking /dev/sgu... failed to open (Invalid argument) > checking /dev/sgv... failed to open (Invalid argument) > checking /dev/sgw... failed to open (Invalid argument) > checking /dev/sgx... failed to open (Invalid argument) > checking /dev/sgy... failed to open (Invalid argument) > checking /dev/sgz... failed to open (Invalid argument) > # No SCSI scanners found. If you expected something different, make sure > that > # you have loaded a kernel SCSI driver for your SCSI adapter. > > searching for USB scanners: > checking /dev/usb/scanner... failed to open (Invalid argument) > checking /dev/usb/scanner0... failed to open (Invalid argument) > checking /dev/usb/scanner1... failed to open (Invalid argument) > checking /dev/usb/scanner2... failed to open (Invalid argument) > checking /dev/usb/scanner3... failed to open (Invalid argument) > checking /dev/usb/scanner4... failed to open (Invalid argument) > checking /dev/usb/scanner5... failed to open (Invalid argument) > checking /dev/usb/scanner5... failed to open (Invalid argument) > checking /dev/usb/scanner7... failed to open (Invalid argument) > checking /dev/usb/scanner8... failed to open (Invalid argument) > checking /dev/usb/scanner9... failed to open (Invalid argument) > checking /dev/usb/scanner10... failed to open (Invalid argument) > checking /dev/usb/scanner11... failed to open (Invalid argument) > checking /dev/usb/scanner12... failed to open (Invalid argument) > checking /dev/usb/scanner13... failed to open (Invalid argument) > checking /dev/usb/scanner14... failed to open (Invalid argument) > checking /dev/usb/scanner15... failed to open (Invalid argument) > checking /dev/usbscanner... failed to open (Invalid argument) > checking /dev/usbscanner0... failed to open (Invalid argument) > checking /dev/usbscanner1... failed to open (Invalid argument) > checking /dev/usbscanner2... failed to open (Invalid argument) > checking /dev/usbscanner3... failed to open (Invalid argument) > checking /dev/usbscanner4... failed to open (Invalid argument) > checking /dev/usbscanner5... failed to open (Invalid argument) > checking /dev/usbscanner6... failed to open (Invalid argument) > checking /dev/usbscanner7... failed to open (Invalid argument) > checking /dev/usbscanner8... failed to open (Invalid argument) > checking /dev/usbscanner9... failed to open (Invalid argument) > checking /dev/usbscanner10... failed to open (Invalid argument) > checking /dev/usbscanner11... failed to open (Invalid argument) > checking /dev/usbscanner12... failed to open (Invalid argument) > checking /dev/usbscanner13... failed to open (Invalid argument) > checking /dev/usbscanner14... failed to open (Invalid argument) > checking /dev/usbscanner15... failed to open (Invalid argument) > trying libusb: > > <device descriptor of 0x03f0/0x2805 at 005:006 (hewlett packard hp scanjet)> > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 0 > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x03F0 > idProduct 0x2805 > bcdDevice 1.00 > iManufacturer 1 (hewlett packard) > iProduct 2 (hp scanjet) > iSerialNumber 3 (CN78GA539F0530) > bNumConfigurations 1 > <configuration 0> > bLength 9 > bDescriptorType 2 > wTotalLength 39 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 4 (USB SCANNER) > bmAttributes 224 (Self-poweredRemote Wakeup) > MaxPower 2 mA > <interface 0> > <altsetting 0> > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 3 > bInterfaceClass 255 > bInterfaceSubClass 0 > bInterfaceProtocol 255 > iInterface 5 (Bulk-In, Bulk-Out, Interrupt Interface) > <endpoint 0> > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 (in 0x01) > bmAttributes 2 (bulk) > wMaxPacketSize 512 > bInterval 0 ms > bRefresh 0 > bSynchAddress 0 > <endpoint 1> > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 (out 0x02) > bmAttributes 2 (bulk) > wMaxPacketSize 512 > bInterval 0 ms > bRefresh 0 > bSynchAddress 0 > <endpoint 2> > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x83 (in 0x03) > bmAttributes 3 (interrupt) > wMaxPacketSize 1 > bInterval 12 ms > bRefresh 0 > bSynchAddress 0 > > <trying to find out which USB chip is used> > checking for GT-6801 ... > this is not a GT-6801 (bDeviceClass = 0) > checking for GT-6816 ... > this is not a GT-6816 (bcdUSB = 0x200) > checking for GT-8911 ... > this is not a GT-8911 (check 2, bcdUSB = 0x200) > checking for MA-1017 ... > this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255) > checking for MA-1015 ... > this is not a MA-1015 (bDeviceClass = 0) > checking for MA-1509 ... > this is not a MA-1509 (bDeviceClass = 0) > checking for LM983[1,2,3] ... > this is not a LM983x (bcdUSB = 0x200) > checking for GL646 ... > this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255) > checking for GL646_HP ... > this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255) > checking for GL660+GL646 ... > this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255) > checking for GL84x ... > this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255) > checking for ICM532B ... > this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255) > checking for PV8630/LM9830 ... > this is not a PV8630/LM9830 (bcdUSB = 0x200) > checking for M011 ... > this is not a M011 (bDeviceClass = 0) > checking for RTS8822 ... > <This USB chip looks like a RTS8822 (result from sane-backends 1.0.19)> > > found USB scanner (vendor=0x03f0 [hewlett packard], product=0x2805 [hp > scanjet], chip=RTS8822) at libusb:005:006 > > <device descriptor of 0x18a5/0x0214 at 005:004 (Verbatim Portable USB Drive)> > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 0 > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x18A5 > idProduct 0x0214 > bcdDevice 1.03 > iManufacturer 2 (Verbatim) > iProduct 3 (Portable USB Drive) > iSerialNumber 1 (683000003Ef4) > bNumConfigurations 1 > <configuration 0> > bLength 9 > bDescriptorType 2 > wTotalLength 32 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 4 (Bulk Only Configuration) > bmAttributes 192 (Self-powered) > MaxPower 2 mA > <interface 0> > <altsetting 0> > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 8 > bInterfaceSubClass 6 > bInterfaceProtocol 80 > iInterface 5 (Bulk Only Interface) > <endpoint 0> > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 (in 0x01) > bmAttributes 2 (bulk) > wMaxPacketSize 512 > bInterval 0 ms > bRefresh 0 > bSynchAddress 0 > <endpoint 1> > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 (out 0x02) > bmAttributes 2 (bulk) > wMaxPacketSize 512 > bInterval 0 ms > bRefresh 0 > bSynchAddress 0 > > <device descriptor of 0x05e3/0x070e at 005:005 (USB Storage)> > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 0 > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x05E3 > idProduct 0x070E > bcdDevice 150.02 > iManufacturer 0 () > iProduct 1 (USB Storage) > iSerialNumber 2 (000000009602) > bNumConfigurations 1 > <configuration 0> > bLength 9 > bDescriptorType 2 > wTotalLength 32 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 () > bmAttributes 128 () > MaxPower 500 mA > <interface 0> > <altsetting 0> > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 8 > bInterfaceSubClass 6 > bInterfaceProtocol 80 > iInterface 0 () > <endpoint 0> > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 (in 0x01) > bmAttributes 2 (bulk) > wMaxPacketSize 512 > bInterval 0 ms > bRefresh 0 > bSynchAddress 0 > <endpoint 1> > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 (out 0x02) > bmAttributes 2 (bulk) > wMaxPacketSize 512 > bInterval 0 ms > bRefresh 0 > bSynchAddress 0 > > <device descriptor of 0x05e3/0x0608 at 005:003 (USB2.0 Hub)> > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 9 > bDeviceSubClass 0 > bDeviceProtocol 1 > bMaxPacketSize0 64 > idVendor 0x05E3 > idProduct 0x0608 > bcdDevice 7.02 > iManufacturer 0 () > iProduct 1 (USB2.0 Hub) > iSerialNumber 0 () > bNumConfigurations 1 > <configuration 0> > bLength 9 > bDescriptorType 2 > wTotalLength 25 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 () > bmAttributes 224 (Self-poweredRemote Wakeup) > MaxPower 100 mA > <interface 0> > <altsetting 0> > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 9 > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 () > <endpoint 0> > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 (in 0x01) > bmAttributes 3 (interrupt) > wMaxPacketSize 1 > bInterval 12 ms > bRefresh 0 > bSynchAddress 0 > > <device descriptor of 0x1d6b/0x0002 at 005:001 (Linux 2.6.27.7-9-default > ehci_hcd EHCI Host Controller)> > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 9 > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x1D6B > idProduct 0x0002 > bcdDevice 2.06 > iManufacturer 3 (Linux 2.6.27.7-9-default ehci_hcd) > iProduct 2 (EHCI Host Controller) > iSerialNumber 1 (0000:00:0b.2) > bNumConfigurations 1 > <configuration 0> > bLength 9 > bDescriptorType 2 > wTotalLength 25 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 () > bmAttributes 224 (Self-poweredRemote Wakeup) > MaxPower 0 mA > <interface 0> > <altsetting 0> > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 9 > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 () > <endpoint 0> > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 (in 0x01) > bmAttributes 3 (interrupt) > wMaxPacketSize 4 > bInterval 12 ms > bRefresh 0 > bSynchAddress 0 > > <device descriptor of 0x1d6b/0x0001 at 004:001 (Linux 2.6.27.7-9-default > uhci_hcd UHCI Host Controller)> > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 9 > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x1D6B > idProduct 0x0001 > bcdDevice 2.06 > iManufacturer 3 (Linux 2.6.27.7-9-default uhci_hcd) > iProduct 2 (UHCI Host Controller) > iSerialNumber 1 (0000:00:04.3) > bNumConfigurations 1 > <configuration 0> > bLength 9 > bDescriptorType 2 > wTotalLength 25 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 () > bmAttributes 224 (Self-poweredRemote Wakeup) > MaxPower 0 mA > <interface 0> > <altsetting 0> > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 9 > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 () > <endpoint 0> > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 (in 0x01) > bmAttributes 3 (interrupt) > wMaxPacketSize 2 > bInterval 255 ms > bRefresh 0 > bSynchAddress 0 > > <device descriptor of 0x1d6b/0x0001 at 003:001 (Linux 2.6.27.7-9-default > uhci_hcd UHCI Host Controller)> > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 9 > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x1D6B > idProduct 0x0001 > bcdDevice 2.06 > iManufacturer 3 (Linux 2.6.27.7-9-default uhci_hcd) > iProduct 2 (UHCI Host Controller) > iSerialNumber 1 (0000:00:04.2) > bNumConfigurations 1 > <configuration 0> > bLength 9 > bDescriptorType 2 > wTotalLength 25 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 () > bmAttributes 224 (Self-poweredRemote Wakeup) > MaxPower 0 mA > <interface 0> > <altsetting 0> > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 9 > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 () > <endpoint 0> > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 (in 0x01) > bmAttributes 3 (interrupt) > wMaxPacketSize 2 > bInterval 255 ms > bRefresh 0 > bSynchAddress 0 > > <device descriptor of 0x050d/0x0121 at 001:003 (ADMtek USB To LAN Converter)> > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 0 > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 8 > idVendor 0x050D > idProduct 0x0121 > bcdDevice 1.01 > iManufacturer 1 (ADMtek) > iProduct 2 (USB To LAN Converter) > iSerialNumber 3 (0001) > bNumConfigurations 1 > <configuration 0> > bLength 9 > bDescriptorType 2 > wTotalLength 39 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 () > bmAttributes 160 (Remote Wakeup) > MaxPower 160 mA > <interface 0> > <altsetting 0> > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 3 > bInterfaceClass 0 > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 () > <endpoint 0> > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 (in 0x01) > bmAttributes 2 (bulk) > wMaxPacketSize 64 > bInterval 0 ms > bRefresh 0 > bSynchAddress 0 > <endpoint 1> > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 (out 0x02) > bmAttributes 2 (bulk) > wMaxPacketSize 64 > bInterval 0 ms > bRefresh 0 > bSynchAddress 0 > <endpoint 2> > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x83 (in 0x03) > bmAttributes 3 (interrupt) > wMaxPacketSize 8 > bInterval 128 ms > bRefresh 0 > bSynchAddress 0 > > <trying to find out which USB chip is used> > checking for GT-6801 ... > this is not a GT-6801 (bDeviceClass = 0) > checking for GT-6816 ... > this is not a GT-6816 (bDeviceClass = 0, bInterfaceClass = 0) > checking for GT-8911 ... > this is not a GT-8911 (check 1, bDeviceClass = 0, bInterfaceClass = 0) > checking for MA-1017 ... > this is not a MA-1017 (bcdUSB = 0x110) > checking for MA-1015 ... > this is not a MA-1015 (bDeviceClass = 0) > checking for MA-1509 ... > this is not a MA-1509 (bDeviceClass = 0) > checking for LM983[1,2,3] ... > this is not a LM983x (bDeviceClass = 0, bInterfaceClass = 0) > checking for GL646 ... > this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 0) > checking for GL646_HP ... > this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 0) > checking for GL660+GL646 ... > this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 0) > checking for GL84x ... > this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 0) > checking for ICM532B ... > this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 0) > checking for PV8630/LM9830 ... > this is not a PV8630/LM9830 (bcdUSB = 0x110) > checking for M011 ... > this is not a M011 (bDeviceClass = 0) > checking for RTS8822 ... > this is not a RTS8822 (bEndpointAddress = 0x81, bmAttributes = 0x2, > wMaxPacketSize = 0x40, bInterval = 0x0) > checking for rts8858c ... > this is not a rts8858c (bEndpointAddress = 0x2, bmAttributes = 0x2, > wMaxPacketSize = 0x40, bInterval = 0x0) > checking for SQ113 ... > this is not a SQ113 (bcdUSB = 0x110) > checking for HP5550/5590/7650 chipset ... > this is not a HP5550/5590/7650 chipset (bDeviceClass = 0) > checking for rts8801/rts8891 ... > this is not a rts8801/rts8891 (bEndpointAddress = 0x2, bmAttributes = 0x2, > wMaxPacketSize = 0x40, bInterval = 0x0) > <Couldn't determine the type of the USB chip (result from sane-backends > 1.0.19)> > > found USB scanner (vendor=0x050d [ADMtek], product=0x0121 [USB To LAN > Converter]) at libusb:001:003 > > <device descriptor of 0x1d6b/0x0001 at 001:001 (Linux 2.6.27.7-9-default > ohci_hcd OHCI Host Controller)> > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 9 > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x1D6B > idProduct 0x0001 > bcdDevice 2.06 > iManufacturer 3 (Linux 2.6.27.7-9-default ohci_hcd) > iProduct 2 (OHCI Host Controller) > iSerialNumber 1 (0000:00:0b.0) > bNumConfigurations 1 > <configuration 0> > bLength 9 > bDescriptorType 2 > wTotalLength 25 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 () > bmAttributes 224 (Self-poweredRemote Wakeup) > MaxPower 0 mA > <interface 0> > <altsetting 0> > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 9 > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 () > <endpoint 0> > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 (in 0x01) > bmAttributes 3 (interrupt) > wMaxPacketSize 2 > bInterval 255 ms > bRefresh 0 > bSynchAddress 0 > > <device descriptor of 0x1d6b/0x0001 at 002:001 (Linux 2.6.27.7-9-default > ohci_hcd OHCI Host Controller)> > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 9 > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x1D6B > idProduct 0x0001 > bcdDevice 2.06 > iManufacturer 3 (Linux 2.6.27.7-9-default ohci_hcd) > iProduct 2 (OHCI Host Controller) > iSerialNumber 1 (0000:00:0b.1) > bNumConfigurations 1 > <configuration 0> > bLength 9 > bDescriptorType 2 > wTotalLength 25 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 () > bmAttributes 224 (Self-poweredRemote Wakeup) > MaxPower 0 mA > <interface 0> > <altsetting 0> > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 9 > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 () > <endpoint 0> > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 (in 0x01) > bmAttributes 3 (interrupt) > wMaxPacketSize 2 > bInterval 255 ms > bRefresh 0 > bSynchAddress 0 > # Your USB scanner was (probably) detected. It may or may not be supported > by > # SANE. Try scanimage -L and read the backend's manpage. > > # Not checking for parallel port scanners. > > # Most Scanners connected to the parallel port or other proprietary ports > # can't be detected by this program. > done > > > > > -- > sane-devel mailing list: sane-devel at lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > to sane-devel-request at lists.alioth.debian.org > -- "The truth is an offense, but not a sin"
