Stef and Pierre, Good work! I have an XP200 and it seems to be working well. I don't have another XP300 to test out.
Jack McGill --- On Sun, 2/8/09, Pierre Willenbrock <pierre at pirsoft.dnsalias.org> wrote: > From: Pierre Willenbrock <pierre at pirsoft.dnsalias.org> > Subject: Re: [sane-devel] genesys backend update > To: sane-devel at lists.alioth.debian.org > Date: Sunday, February 8, 2009, 12:30 PM > Hello, > > stef schrieb: > > the genesys backend as been updated. Thanks to an > hardware donation of Jack > > McGill, there is now support for the sheet-fed > Visioneer Strobe XP200. It can > > scan at 75, 100, 200, 300 and 600 dpi in color or gray > and at 8 or 16 bits. > > Scans are uncalibrated, ie there is no shading nor > gain calibration. The next > > step is to add calibration which use an external sheet > with printed patterns. > > update time again, this time it is the sheet-fed Visioneer > Strobe XP300, > thanks to a hardware donation of Jack McGill. What stef > said pretty much > applies to the XP300, too, but the XP300 is a duplex > scanner, so there > are additional caveats. Front- and back side are currently > output > side-by-side, with the back side mirrored horizontally, > shifted > downwards relative to the front side. Currently, the > scanner essentially > behaves like having a double-width sensor. > > Regards, > Pierre > > PS1: don't try to test this on current cvs -- at least > for me, it > creates libsane-*.so.0.1.0, instead of libsane-*.so.1.1.0. > PS2: Sorry Jack, but the XP300 was far more interesting > than the > Roadwarrior ;-) -- i am working on it. > > -- > sane-devel mailing list: sane-devel at lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe > your_password" > to sane-devel-request at lists.alioth.debian.org
