Hi all, I am the happy owner of an HP Officejet Pro L7560 (an all-in-one device).
Until recently I had this connected to my server through USB, and printing and scanning all worked fine. Of course using sane on the server to access the scanner from the workstations. Now I have a new office, all is rearranged, and the Officejet is connected directly to the network. It gets it's IP from the server by DHCP, which I configured to be fixed, so far so good. Printing (though Cups) works like a charm after some googling to get the correct way to address the printer, but now scanning! How can I do this? A couple of hours searching Google didn't give me a single clue... the scanner is not found automatically by Sane, and no idea on how to address it. I'm looking for one of two solutions: 1) server is talking to the scanner one way or another, and then shares the scanner with the workstations through the existing Sane interface. 2) the workstations (three only, it's a small network) talk to the scanner directly (they are all on the same 192.168.2.0/24 subnet) (if easy/automatically to configure on the workstations). Wouter.
