Hello,
Today I bought this scanner (dmesg and sane-find-device output included)
and to my supprice even the chipset isn't mentioned as (un)supported, so
I guess I have a new device...
Is someone already working on the support of this device?
[313022.590041] usb 3-2: new high speed USB device using ehci_hcd and address 3
[313022.725925] usb 3-2: configuration #1 chosen from 1 choice
[313022.728155] usb 3-2: New USB device found, idVendor=04a9, idProduct=1905
[313022.728155] usb 3-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[313022.728155] usb 3-2: Product: CanoScan
[313022.728155] usb 3-2: Manufacturer: Canon
[313102.016944] usb 3-2: USB disconnect, address 3
[313105.166988] usb 3-2: new high speed USB device using ehci_hcd and address 4
[313105.363834] usb 3-2: configuration #1 chosen from 1 choice
[313105.366664] usb 3-2: New USB device found, idVendor=04a9, idProduct=1905
[313105.366682] usb 3-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[313105.366682] usb 3-2: Product: CanoScan
[313105.366682] usb 3-2: Manufacturer: Canon
<device descriptor of 0x04a9/0x1905 at 003:004>
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255
bDeviceSubClass 255
bDeviceProtocol 255
bMaxPacketSize0 64
idVendor 0x04A9
idProduct 0x1905
bcdDevice 6.03
iManufacturer 1 ((null))
iProduct 2 ((null))
iSerialNumber 0 ()
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 160 (Remote Wakeup)
MaxPower 500 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255
bInterfaceSubClass 255
bInterfaceProtocol 255
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 1>
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 (out 0x02)
bmAttributes 2 (bulk)
wMaxPacketSize 512
bInterval 0 ms
bRefresh 0
bSynchAddress 0
<endpoint 2>
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 (in 0x03)
bmAttributes 3 (interrupt)
wMaxPacketSize 1
bInterval 8 ms
bRefresh 0
bSynchAddress 0
<trying to find out which USB chip is used>
checking for GT-6801 ...
this is not a GT-6801 (bcdUSB = 0x200)
checking for GT-6816 ...
this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GT-8911 ...
this is not a GT-8911 (check 1, bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1017 ...
this is not a MA-1017 (bDeviceClass = 255, bInterfaceClass = 255)
checking for MA-1015 ...
this is not a MA-1015 (bcdUSB = 0x200)
checking for MA-1509 ...
this is not a MA-1509 (bcdUSB = 0x200)
checking for LM983[1,2,3] ...
this is not a LM983x (bcdUSB = 0x200)
checking for GL646 ...
this is not a GL646 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GL646_HP ...
this is not a GL646_HP (bcdUSB = 0x200)
checking for GL660+GL646 ...
this is not a GL660+GL646 (bDeviceClass = 255, bInterfaceClass = 255)
checking for GL84x ...
Couldn't set configuration: could not set config 1: Operation not permitted
<This USB chip looks like a GL843? (result from sane-backends 1.0.19)>
found USB scanner (vendor=0x04a9, product=0x1905, chip=GL843?) at libusb:003:004
<device descriptor of 0x1d6b/0x0002 at 003:001>
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1D6B
idProduct 0x0002
bcdDevice 2.06
iManufacturer 3 ((null))
iProduct 2 ((null))
iSerialNumber 1 ((null))
bNumConfigurations 1
<configuration 0>
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0 ()
bmAttributes 224 (Self-poweredRemote Wakeup)
MaxPower 0 mA
<interface 0>
<altsetting 0>
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0 ()
<endpoint 0>
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 (in 0x01)
bmAttributes 3 (interrupt)
wMaxPacketSize 4
bInterval 12 ms
bRefresh 0
bSynchAddress 0
---
Jan Huijsmans bofh at koffie.nu
... cannot activate /dev/brain, no response from main coffee server
