Good day, I own an old Umax AstraSlim SE with which I can scan, but only one page. The second time I try, I get an I/O error:
scanimage: open of device artec_eplus48u:libusb:001:005 failed: Error during device I/O I'm using Linux version 2.6.25-2-486 (Debian 2.6.25-7) (maks at debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 Fri Jul 18 17:03:35 UTC 2008 scanimage (sane-backends) 1.0.19; backend version 1.0.19 I've tried with SANE_DEBUG_SHARP=128 SANE_DEBUG_SANEI_SCSI=128 SANE_DEBUG_DLL=128 and it gives me the following bunch of messages, but it doesn't help for me. I suppose the interesting lines are those: [dll] load: searching backend `epkowa' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-epkowa.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-epkowa.so.1' [dll] init: initializing backend `epkowa' [sanei_debug] Setting debug level of sanei_scsi to 128. [dll] init: backend `epkowa' is version 1.0.208 [dll] sane_get_devices: found 1 devices [dll] sane_open: trying to open `artec_eplus48u:libusb:001:005' scanimage: open of device artec_eplus48u:libusb:001:005 failed: Error during device I/O [dll] sane_exit: exiting Any idea? Thanks in advance. # export SANE_DEBUG_SHARP=128 SANE_DEBUG_SANEI_SCSI=128 SANE_DEBUG_DLL=128 # scanimage -x 210 -y 297 -b --format=tiff --resolution=100 --brightness 30 [sanei_debug] Setting debug level of dll to 128. [dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.19 [dll] sane_init/read_dlld: processing /etc/sane.d/dll.d ... [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/libsane-extras [dll] sane_init/read_config: reading dll.d/libsane-extras [dll] add_backend: adding backend `epkowa' [dll] add_backend: adding backend `hp_rts88xx' [dll] add_backend: adding backend `ls5000' [dll] sane_init/read_dlld: considering /etc/sane.d/dll.d/hplip [dll] sane_init/read_config: reading dll.d/hplip [dll] add_backend: adding backend `hpaio' [dll] sane_init/read_dlld: done. [dll] sane_init/read_config: reading dll.conf [dll] add_backend: adding backend `net' [dll] add_backend: adding backend `abaton' [dll] add_backend: adding backend `agfafocus' [dll] add_backend: adding backend `apple' [dll] add_backend: adding backend `avision' [dll] add_backend: adding backend `artec' [dll] add_backend: adding backend `artec_eplus48u' [dll] add_backend: adding backend `as6e' [dll] add_backend: adding backend `bh' [dll] add_backend: adding backend `canon' [dll] add_backend: adding backend `canon630u' [dll] add_backend: adding backend `cardscan' [dll] add_backend: adding backend `coolscan' [dll] add_backend: adding backend `coolscan2' [dll] add_backend: adding backend `dell1600n_net' [dll] add_backend: adding backend `dmc' [dll] add_backend: adding backend `epjitsu' [dll] add_backend: adding backend `epson' [dll] add_backend: adding backend `epson2' [dll] add_backend: adding backend `fujitsu' [dll] add_backend: adding backend `genesys' [dll] add_backend: adding backend `gt68xx' [dll] add_backend: adding backend `hp' [dll] add_backend: adding backend `hp3900' [dll] add_backend: adding backend `hpsj5s' [dll] add_backend: adding backend `hp3500' [dll] add_backend: adding backend `hp4200' [dll] add_backend: adding backend `hp5400' [dll] add_backend: adding backend `hp5590' [dll] add_backend: adding backend `hpljm1005' [dll] add_backend: adding backend `hs2p' [dll] add_backend: adding backend `ibm' [dll] add_backend: adding backend `leo' [dll] add_backend: adding backend `lexmark' [dll] add_backend: adding backend `ma1509' [dll] add_backend: adding backend `matsushita' [dll] add_backend: adding backend `microtek' [dll] add_backend: adding backend `microtek2' [dll] add_backend: adding backend `mustek' [dll] add_backend: adding backend `mustek_usb' [dll] add_backend: adding backend `mustek_usb2' [dll] add_backend: adding backend `nec' [dll] add_backend: adding backend `niash' [dll] add_backend: adding backend `pie' [dll] add_backend: adding backend `pixma' [dll] add_backend: adding backend `plustek' [dll] add_backend: adding backend `qcam' [dll] add_backend: adding backend `ricoh' [dll] add_backend: adding backend `s9036' [dll] add_backend: adding backend `sceptre' [dll] add_backend: adding backend `sharp' [dll] add_backend: adding backend `sm3600' [dll] add_backend: adding backend `sm3840' [dll] add_backend: adding backend `snapscan' [dll] add_backend: adding backend `sp15c' [dll] add_backend: adding backend `tamarack' [dll] add_backend: adding backend `teco1' [dll] add_backend: adding backend `teco2' [dll] add_backend: adding backend `teco3' [dll] add_backend: adding backend `u12' [dll] add_backend: adding backend `umax' [dll] add_backend: adding backend `umax1220u' [dll] add_backend: adding backend `v4l' [dll] sane_get_devices [dll] load: searching backend `v4l' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-v4l.so.1' [dll] init: initializing backend `v4l' [dll] init: backend `v4l' is version 1.0.4 [dll] load: searching backend `umax1220u' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-umax1220u.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-umax1220u.so.1' [dll] init: initializing backend `umax1220u' [dll] init: backend `umax1220u' is version 1.0.1 [dll] load: searching backend `umax' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-umax.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-umax.so.1' [dll] init: initializing backend `umax' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `umax' is version 1.0.45 [dll] load: searching backend `u12' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-u12.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-u12.so.1' [dll] init: initializing backend `u12' [dll] init: backend `u12' is version 1.0.0 [dll] load: searching backend `teco3' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-teco3.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-teco3.so.1' [dll] init: initializing backend `teco3' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `teco3' is version 1.0.1 [dll] load: searching backend `teco2' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-teco2.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-teco2.so.1' [dll] init: initializing backend `teco2' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `teco2' is version 1.0.10 [dll] load: searching backend `teco1' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-teco1.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-teco1.so.1' [dll] init: initializing backend `teco1' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `teco1' is version 1.0.10 [dll] load: searching backend `tamarack' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-tamarack.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-tamarack.so.1' [dll] init: initializing backend `tamarack' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `tamarack' is version 1.0.0 [dll] load: searching backend `sp15c' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-sp15c.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-sp15c.so.1' [dll] init: initializing backend `sp15c' [sanei_debug] Setting debug level of sanei_scsi to 128. [dll] init: backend `sp15c' is version 1.0.0 [dll] load: searching backend `snapscan' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-snapscan.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-snapscan.so.1' [dll] init: initializing backend `snapscan' [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_debug] Setting debug level of sanei_scsi to 128. [dll] init: backend `snapscan' is version 1.4.53 [dll] load: searching backend `sm3840' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-sm3840.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-sm3840.so.1' [dll] init: initializing backend `sm3840' [dll] init: backend `sm3840' is version 1.0.0 [dll] load: searching backend `sm3600' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-sm3600.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-sm3600.so.1' [dll] init: initializing backend `sm3600' [dll] init: backend `sm3600' is version 1.0.6 [dll] load: searching backend `sharp' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-sharp.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-sharp.so.1' [dll] init: initializing backend `sharp' [sanei_debug] Setting debug level of sharp to 128. [sharp] << sane_init [sharp] sane_init: sane-backends 1.0.19 [sanei_debug] Setting debug level of sanei_scsi to 128. [sharp] << attach [sharp] attach: opening /dev/scanner [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [sharp] attach: open failed: Invalid argument [sharp] sane_init >> [dll] init: backend `sharp' is version 1.0.0 [sharp] << sane_get_devices [sharp] >> [dll] load: searching backend `sceptre' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-sceptre.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-sceptre.so.1' [dll] init: initializing backend `sceptre' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `sceptre' is version 1.0.10 [dll] load: searching backend `s9036' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-s9036.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-s9036.so.1' [dll] init: initializing backend `s9036' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `s9036' is version 1.0.0 [dll] load: searching backend `ricoh' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-ricoh.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-ricoh.so.1' [dll] init: initializing backend `ricoh' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `ricoh' is version 1.0.0 [dll] load: searching backend `qcam' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-qcam.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-qcam.so.1' [dll] init: initializing backend `qcam' [dll] init: backend `qcam' is version 1.0.0 [dll] load: searching backend `plustek' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-plustek.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-plustek.so.1' [dll] init: initializing backend `plustek' [dll] init: backend `plustek' is version 1.0.0 [dll] load: searching backend `pixma' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-pixma.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-pixma.so.1' [dll] init: initializing backend `pixma' [dll] init: backend `pixma' is version 1.0.14 [dll] load: searching backend `pie' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-pie.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-pie.so.1' [dll] init: initializing backend `pie' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `pie' is version 1.0.9 [dll] load: searching backend `niash' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-niash.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-niash.so.1' [dll] init: initializing backend `niash' [dll] init: backend `niash' is version 1.0.1 [dll] load: searching backend `nec' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-nec.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-nec.so.1' [dll] init: initializing backend `nec' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `nec' is version 1.0.0 [dll] load: searching backend `mustek_usb2' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-mustek_usb2.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-mustek_usb2.so.1' [dll] init: initializing backend `mustek_usb2' [dll] init: backend `mustek_usb2' is version 1.0.10 [dll] load: searching backend `mustek_usb' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-mustek_usb.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-mustek_usb.so.1' [dll] init: initializing backend `mustek_usb' [dll] init: backend `mustek_usb' is version 1.0.18 [dll] load: searching backend `mustek' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-mustek.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-mustek.so.1' [dll] init: initializing backend `mustek' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `mustek' is version 1.0.138 [dll] load: searching backend `microtek2' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-microtek2.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-microtek2.so.1' [dll] init: initializing backend `microtek2' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `microtek2' is version 1.0.0 [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] load: searching backend `microtek' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-microtek.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-microtek.so.1' [dll] init: initializing backend `microtek' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `microtek' is version 1.0.0 [dll] load: searching backend `matsushita' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-matsushita.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-matsushita.so.1' [dll] init: initializing backend `matsushita' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `matsushita' is version 1.0.7 [dll] load: searching backend `ma1509' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-ma1509.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-ma1509.so.1' [dll] init: initializing backend `ma1509' [dll] init: backend `ma1509' is version 1.0.3 [dll] load: searching backend `lexmark' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-lexmark.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-lexmark.so.1' [dll] init: initializing backend `lexmark' [dll] init: backend `lexmark' is version 1.0.19 [dll] load: searching backend `leo' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-leo.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-leo.so.1' [dll] init: initializing backend `leo' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `leo' is version 1.0.11 [dll] load: searching backend `ibm' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-ibm.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-ibm.so.1' [dll] init: initializing backend `ibm' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `ibm' is version 1.0.0 [dll] load: searching backend `hs2p' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hs2p.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hs2p.so.1' [dll] init: initializing backend `hs2p' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `hs2p' is version 1.0.0 [dll] load: searching backend `hpljm1005' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hpljm1005.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpljm1005.so.1' [dll] init: initializing backend `hpljm1005' [dll] init: backend `hpljm1005' is version 1.0.0 [dll] load: searching backend `hp5590' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp5590.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp5590.so.1' [dll] init: initializing backend `hp5590' [dll] init: backend `hp5590' is version 1.0.2 [dll] load: searching backend `hp5400' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp5400.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp5400.so.1' [dll] init: initializing backend `hp5400' [dll] init: backend `hp5400' is version 1.0.3 [dll] load: searching backend `hp4200' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp4200.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp4200.so.1' [dll] init: initializing backend `hp4200' [dll] init: backend `hp4200' is version 1.0.0 [dll] load: searching backend `hp3500' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp3500.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp3500.so.1' [dll] init: initializing backend `hp3500' [dll] init: backend `hp3500' is version 1.0.0 [dll] load: searching backend `hpsj5s' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hpsj5s.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hpsj5s.so.1' [dll] init: initializing backend `hpsj5s' [dll] init: backend `hpsj5s' is version 1.0.3 [dll] load: searching backend `hp3900' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp3900.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp3900.so.1' [dll] init: initializing backend `hp3900' [dll] init: backend `hp3900' is version 1.0.0 [dll] load: searching backend `hp' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp.so.1' [dll] init: initializing backend `hp' [dll] init: backend `hp' is version 1.0.8 [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] load: searching backend `gt68xx' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-gt68xx.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-gt68xx.so.1' [dll] init: initializing backend `gt68xx' [dll] init: backend `gt68xx' is version 1.0.84 [dll] load: searching backend `genesys' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-genesys.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-genesys.so.1' [dll] init: initializing backend `genesys' [dll] init: backend `genesys' is version 1.0.9 [dll] load: searching backend `fujitsu' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-fujitsu.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-fujitsu.so.1' [dll] init: initializing backend `fujitsu' [dll] init: backend `fujitsu' is version 1.0.55 [sanei_debug] Setting debug level of sanei_scsi to 128. [dll] load: searching backend `epson2' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-epson2.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-epson2.so.1' [dll] init: initializing backend `epson2' [sanei_debug] Setting debug level of sanei_scsi to 128. [dll] init: backend `epson2' is version 1.0.116 [dll] load: searching backend `epson' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-epson.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-epson.so.1' [dll] init: initializing backend `epson' [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_debug] Setting debug level of sanei_scsi to 128. [dll] init: backend `epson' is version 1.0.247 [dll] load: searching backend `epjitsu' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-epjitsu.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-epjitsu.so.1' [dll] init: initializing backend `epjitsu' [dll] init: backend `epjitsu' is version 1.0.10 [dll] load: searching backend `dmc' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-dmc.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-dmc.so.1' [dll] init: initializing backend `dmc' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/camera' failed: No such file or directory [dll] init: backend `dmc' is version 1.0.0 [dll] load: searching backend `dell1600n_net' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-dell1600n_net.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-dell1600n_net.so.1' [dll] init: initializing backend `dell1600n_net' [dll] init: backend `dell1600n_net' is version 1.0.0 [dll] load: searching backend `coolscan2' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-coolscan2.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-coolscan2.so.1' [dll] init: initializing backend `coolscan2' [dll] init: backend `coolscan2' is version 1.0.0 [sanei_debug] Setting debug level of sanei_scsi to 128. [dll] load: searching backend `coolscan' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-coolscan.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-coolscan.so.1' [dll] init: initializing backend `coolscan' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `coolscan' is version 1.0.0 [dll] load: searching backend `cardscan' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-cardscan.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-cardscan.so.1' [dll] init: initializing backend `cardscan' [dll] init: backend `cardscan' is version 1.0.0 [dll] load: searching backend `canon630u' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-canon630u.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-canon630u.so.1' [dll] init: initializing backend `canon630u' [dll] init: backend `canon630u' is version 1.0.1 [dll] load: searching backend `canon' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-canon.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-canon.so.1' [dll] init: initializing backend `canon' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `canon' is version 1.0.0 [dll] load: searching backend `bh' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-bh.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-bh.so.1' [dll] init: initializing backend `bh' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `bh' is version 1.0.4 [dll] load: searching backend `as6e' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-as6e.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-as6e.so.1' [dll] init: initializing backend `as6e' [dll] load: searching backend `artec_eplus48u' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-artec_eplus48u.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-artec_eplus48u.so.1' [dll] init: initializing backend `artec_eplus48u' [dll] init: backend `artec_eplus48u' is version 1.0.0 [dll] load: searching backend `artec' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-artec.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-artec.so.1' [dll] init: initializing backend `artec' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `artec' is version 1.0.0 [dll] load: searching backend `avision' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-avision.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-avision.so.1' [dll] init: initializing backend `avision' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [dll] init: backend `avision' is version 1.0.264 [dll] load: searching backend `apple' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-apple.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-apple.so.1' [dll] init: initializing backend `apple' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `apple' is version 1.0.0 [dll] load: searching backend `agfafocus' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-agfafocus.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-agfafocus.so.1' [dll] init: initializing backend `agfafocus' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `agfafocus' is version 1.0.0 [dll] load: searching backend `abaton' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-abaton.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-abaton.so.1' [dll] init: initializing backend `abaton' [sanei_debug] Setting debug level of sanei_scsi to 128. (...) [sanei_debug] Setting debug level of sanei_scsi to 128. [sanei_scsi] sanei_scsi_open: sanei_scsi_max_request_size=131072 bytes [sanei_scsi] sanei_scsi_open: open of `/dev/scanner' failed: No such file or directory [dll] init: backend `abaton' is version 1.0.0 [dll] load: searching backend `net' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-net.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-net.so.1' [dll] init: initializing backend `net' [dll] init: backend `net' is version 1.0.19 [dll] load: searching backend `hpaio' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hpaio.so.1' [dll] load: couldn't open `/usr/lib/sane/libsane-hpaio.so.1' (No such file or directory) [dll] load: couldn't find backend `hpaio' (No such file or directory) [dll] load: searching backend `ls5000' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-ls5000.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-ls5000.so.1' [dll] init: initializing backend `ls5000' [dll] init: backend `ls5000' is version 1.0.0 [dll] load: searching backend `hp_rts88xx' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-hp_rts88xx.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-hp_rts88xx.so.1' [dll] init: initializing backend `hp_rts88xx' [dll] load: searching backend `epkowa' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-epkowa.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-epkowa.so.1' [dll] init: initializing backend `epkowa' [sanei_debug] Setting debug level of sanei_scsi to 128. [dll] init: backend `epkowa' is version 1.0.208 [dll] sane_get_devices: found 1 devices [dll] sane_open: trying to open `artec_eplus48u:libusb:001:005' scanimage: open of device artec_eplus48u:libusb:001:005 failed: Error during device I/O [dll] sane_exit: exiting [dll] sane_exit: calling backend `v4l's exit function [dll] sane_exit: calling backend `umax1220u's exit function [dll] sane_exit: calling backend `umax's exit function [dll] sane_exit: calling backend `u12's exit function [dll] sane_exit: calling backend `teco3's exit function [dll] sane_exit: calling backend `teco2's exit function [dll] sane_exit: calling backend `teco1's exit function [dll] sane_exit: calling backend `tamarack's exit function [dll] sane_exit: calling backend `sp15c's exit function [dll] sane_exit: calling backend `snapscan's exit function [dll] sane_exit: calling backend `sm3840's exit function [dll] sane_exit: calling backend `sm3600's exit function [dll] sane_exit: calling backend `sharp's exit function [sharp] << sane_exit [sharp] >> [dll] sane_exit: calling backend `sceptre's exit function [dll] sane_exit: calling backend `s9036's exit function [dll] sane_exit: calling backend `ricoh's exit function [dll] sane_exit: calling backend `qcam's exit function [dll] sane_exit: calling backend `plustek's exit function [dll] sane_exit: calling backend `pixma's exit function [dll] sane_exit: calling backend `pie's exit function [dll] sane_exit: calling backend `niash's exit function [dll] sane_exit: calling backend `nec's exit function [dll] sane_exit: calling backend `mustek_usb2's exit function [dll] sane_exit: calling backend `mustek_usb's exit function [dll] sane_exit: calling backend `mustek's exit function [dll] sane_exit: calling backend `microtek2's exit function [dll] sane_exit: calling backend `microtek's exit function [dll] sane_exit: calling backend `matsushita's exit function [dll] sane_exit: calling backend `ma1509's exit function [dll] sane_exit: calling backend `lexmark's exit function [dll] sane_exit: calling backend `leo's exit function [dll] sane_exit: calling backend `ibm's exit function [dll] sane_exit: calling backend `hs2p's exit function [dll] sane_exit: calling backend `hpljm1005's exit function [dll] sane_exit: calling backend `hp5590's exit function [dll] sane_exit: calling backend `hp5400's exit function [dll] sane_exit: calling backend `hp4200's exit function [dll] sane_exit: calling backend `hp3500's exit function [dll] sane_exit: calling backend `hpsj5s's exit function [dll] sane_exit: calling backend `hp3900's exit function [dll] sane_exit: calling backend `hp's exit function [dll] sane_exit: calling backend `gt68xx's exit function [dll] sane_exit: calling backend `genesys's exit function [dll] sane_exit: calling backend `fujitsu's exit function [dll] sane_exit: calling backend `epson2's exit function [dll] sane_exit: calling backend `epson's exit function [dll] sane_exit: calling backend `epjitsu's exit function [dll] sane_exit: calling backend `dmc's exit function [dll] sane_exit: calling backend `dell1600n_net's exit function [dll] sane_exit: calling backend `coolscan2's exit function [dll] sane_exit: calling backend `coolscan's exit function [dll] sane_exit: calling backend `cardscan's exit function [dll] sane_exit: calling backend `canon630u's exit function [dll] sane_exit: calling backend `canon's exit function [dll] sane_exit: calling backend `bh's exit function [dll] sane_exit: calling backend `artec_eplus48u's exit function [dll] sane_exit: calling backend `artec's exit function [dll] sane_exit: calling backend `avision's exit function [dll] sane_exit: calling backend `apple's exit function [dll] sane_exit: calling backend `agfafocus's exit function [dll] sane_exit: calling backend `abaton's exit function [dll] sane_exit: calling backend `net's exit function [dll] sane_exit: calling backend `ls5000's exit function [dll] sane_exit: calling backend `epkowa's exit function [dll] sane_exit: finished Cordialement, -- Bernard Choppy <choppy at free.fr> -------------- next part -------------- A non-text attachment was scrubbed... Name: choppy.vcf Type: text/x-vcard Size: 129 bytes Desc: not available Url : http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20080815/5f64b211/attachment-0001.vcf
