I hope this is not a duplicate message but I never received my Cc. so I am re-sending -
*Henning Meier-Geinitz wrote:* > *Hi, > > On 2006-09-25 12:40, Bob Goodwin wrote: > * >> *Is there a step by step instruction for setting up sane? >> * > * > Lots of. Start with man sane (section "PROBLEMS"). See the SANE > website for more docu. > > * >> *found USB scanner (vendor=0x03f0, product=0x0701) at libusb:001:002 >> * > * > So it's found by the kernel. > > * >> *and scanimage -L >> * > * > (not) > > Check if "avision" is listed and not commented out in > /etc/sane.d/dll.conf. > * cat /etc/sane.d/dll.conf # enable the next line if you want to allow access through the network: net abaton agfafocus apple avision artec artec_eplus48u as6e bh canon -------------------- snip ----------------------- #test u12 umax #umax_pp umax1220u v4l # # The following backends are not included in the sane-backends distribution # If you want to use them, download them from their webpages and read their # documentation # # HP OfficeJet backend homepage: http://hpoj.sf.net/ # Uncomment the following line if hpoj is installed: #hpoj hpaio > * > Send us the output of > > scanimage --version > * scanimage --version scanimage (sane-backends) 1.0.18; backend version 1.0.18 > *and > SANE_DEBUG_AVISION=255 scanimage -L > * SANE_DEBUG_AVISION=255 scanimage -L [sanei_debug] Setting debug level of avision to 255. [avision] sane_init:(Version: 1.0 Build: 201) [avision] sane_init: parsing config line "" [avision] sane_init: config file line 1: ignoring empty line [avision] sane_init: parsing config line "# This are the possible options. Normally any scanner" [avision] sane_init: config file line 2: ignoring comment line [avision] sane_init: parsing config line "# should work just fine without them - and they are only" [avision] sane_init: config file line 3: ignoring comment line [avision] sane_init: parsing config line "# needed for test and debugging. So if you experience problems" [avision] sane_init: config file line 4: ignoring comment line [avision] sane_init: parsing config line "# and you solve them with enabling options here, please notify" [avision] sane_init: config file line 5: ignoring comment line [avision] sane_init: parsing config line "# the SANE/Avision maintainer: Rene Rebe <r...@exactcode.de>" [avision] sane_init: config file line 6: ignoring comment line [avision] sane_init: parsing config line "" [avision] sane_init: config file line 7: ignoring empty line [avision] sane_init: parsing config line "#option disable-gamma-table" [avision] sane_init: config file line 8: ignoring comment line [avision] sane_init: parsing config line "#option disable-calibration" [avision] sane_init: config file line 9: ignoring comment line [avision] sane_init: parsing config line "#option force-a4" [avision] sane_init: config file line 10: ignoring comment line [avision] sane_init: parsing config line "" [avision] sane_init: config file line 11: ignoring empty line [avision] sane_init: parsing config line "#scsi AVISION" [avision] sane_init: config file line 12: ignoring comment line [avision] sane_init: parsing config line "#scsi FCPA" [avision] sane_init: config file line 13: ignoring comment line [avision] sane_init: parsing config line "#scsi MINOLTA" [avision] sane_init: config file line 14: ignoring comment line [avision] sane_init: parsing config line "#scsi MITSBISH MCA-S600C" [avision] sane_init: config file line 15: ignoring comment line [avision] sane_init: parsing config line "#scsi MITSBISH MCA-SS600" [avision] sane_init: config file line 16: ignoring comment line [avision] sane_init: parsing config line "#scsi HP" [avision] sane_init: config file line 17: ignoring comment line [avision] sane_init: parsing config line "#scsi hp" [avision] sane_init: config file line 18: ignoring comment line [avision] sane_init: parsing config line "" [avision] sane_init: config file line 19: ignoring empty line [avision] sane_init: parsing config line "#scsi /dev/scanner" [avision] sane_init: config file line 20: ignoring comment line [avision] sane_init: parsing config line "usb libusb:001:002" [avision] sane_init: config file line 21: trying to attach USB:`usb libusb:001:002' [avision] sane_init: parsing config line "usb 0x03f0 0x0701" [avision] sane_init: config file line 22: trying to attach USB:`usb 0x03f0 0x0701' [avision] attach: [avision] attach: opening libusb:001:002 [avision] attach: open failed (Invalid argument) [avision] sane_init: parsing config line "" [avision] sane_init: config file line 23: ignoring empty line [avision] sane_init: Trying to find USB device 638 a27 ... [avision] sane_init: Trying to find USB device 638 a3c ... [avision] sane_init: Trying to find USB device 638 a33 ... [avision] sane_init: Trying to find USB device 638 a24 ... [avision] sane_init: Trying to find USB device 638 a25 ... [avision] sane_init: Trying to find USB device 638 a3a ... [avision] sane_init: Trying to find USB device 638 a23 ... [avision] sane_init: Trying to find USB device 638 a2a ... [avision] sane_init: Trying to find USB device 638 a2a ... [avision] sane_init: Trying to find USB device 638 a19 ... [avision] sane_init: Trying to find USB device 638 a41 ... [avision] sane_init: Trying to find USB device 638 a16 ... [avision] sane_init: Trying to find USB device 638 a13 ... [avision] sane_init: Trying to find USB device 638 a18 ... [avision] sane_init: Trying to find USB device 638 a66 ... [avision] sane_init: Trying to find USB device 638 a40 ... [avision] sane_init: Trying to find USB device 638 a68 ... [avision] sane_init: Trying to find USB device 638 a61 ... [avision] sane_init: Trying to find USB device 638 a45 ... [avision] sane_init: Trying to find USB device 3f0 701 ... [avision] attach: [avision] attach: opening libusb:001:002 [avision] attach: open failed (Invalid argument) [avision] sane_init: Trying to find USB device 3f0 701 ... [avision] attach: [avision] attach: opening libusb:001:002 [avision] attach: open failed (Invalid argument) [avision] sane_init: Trying to find USB device 3f0 801 ... [avision] sane_init: Trying to find USB device 3f0 b01 ... [avision] sane_init: Trying to find USB device 638 26a ... [avision] sane_init: Trying to find USB device 686 4004 ... [avision] sane_init: Trying to find USB device 686 400d ... [avision] sane_init: Trying to find USB device 686 400e ... [avision] sane_init: Trying to find USB device 638 a15 ... [avision] sane_init: Trying to find USB device 638 a16 ... [avision] sane_init: Trying to find USB device 4c5 1029 ... [avision] sane_init: Trying to find USB device 40a 6001 ... [avision] sane_init: Trying to find USB device 40a 6002 ... [avision] sane_init: Trying to find USB device 40a 6003 ... [avision] sane_init: Trying to find USB device 40a 6004 ... [avision] sane_init: Trying to find USB device 40a 6005 ... [avision] sane_init: Trying to find USB device 638 268 ... [avision] sane_init: Trying to find USB device 4a7 449 ... [avision] sane_init: Trying to find USB device 4a7 44c ... [avision] sane_init: Trying to find USB device 4a7 475 ... [avision] sane_get_devices: No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). [avision] sane_exit: A lot of data! Thanks for any help you can provide. Bob Goodwin > * > Bye, > Henning > > *
