Hello, OK, my motor moves !
But, someting doesn't work during initialisation : I get floating point error ! I modified genesys_gl841.c for instrumentation and genesys_devices.c (genesys_sensor section) in accordance to my windows usb snoop log (see attacement). SANE_DEBUG_GENESYS_GL841=255 scanimage -device-name=genesys:libusb:001:066 > toto.pnm ends with : [genesys_gl841] reg[0x86] = 0x00 [genesys_gl841] reg[0x87] = 0x00 [genesys_gl841] gl841_bulk_write_register: wrote 104 registers [genesys_gl841] gl841_led_calibration: starting first line reading [genesys_gl841] gl841_begin_scan [genesys_gl841] gl841_bulk_write_register (elems = 4) [genesys_gl841] reg[0x03] = 0x5f [genesys_gl841] reg[0x01] = 0x81 [genesys_gl841] reg[0x0d] = 0x01 [genesys_gl841] reg[0x0f] = 0x01 [genesys_gl841] gl841_bulk_write_register: wrote 4 registers [genesys_gl841] gl841_begin_scan: completed [genesys_gl841] gl841_bulk_read_data: requesting 31200 bytes [genesys_gl841] gl841_bulk_read_data: trying to read 31200 bytes of data [genesys_gl841] gl841_bulk_read_data read 31200 bytes, 0 remaining [genesys_gl841] gl841_bulk_read_data: completed [genesys_gl841] gl841_led_calibration: average: 0,801,302 [genesys_gl841] gl841_led_calibration: avga=367,expr=0,expg=0,expb=0,avge=0 Exception en point flottant (floating point exception) See sample image toto.jpg too (when commenting zero division in genesys_gl841.c the scanner scans an image). Help needed thanks Guillaume -------------- next part -------------- A non-text attachment was scrubbed... Name: genesys_devices.c Type: text/x-csrc Size: 22784 bytes Desc: not available Url : http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20080115/a47bdceb/attachment-0001.c -------------- next part -------------- A non-text attachment was scrubbed... Name: toto.jpg Type: image/jpeg Size: 7625 bytes Desc: not available Url : http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20080115/a47bdceb/attachment-0001.jpg
