Hello, First off let me say that I am an absolute novice when it comes to any kind of a command line interface, so go easy on me.
Here's my problem. I have installed: sane backends 10.0.18 and libusb 0.1.12 on a G4 macintosh running MacOS 10.3.9 and I can't get my scanner to work using scanimage. This is what happens: Andy-Whelans-Computer:~ andywhelan$ sane-find-scanner # sane-find-scanner will now attempt to detect your scanner. If the # result is different from what you expected, first make sure your # scanner is powered up and properly connected to your computer. # No SCSI scanners found. If you expected something different, make sure that # you have loaded a kernel SCSI driver for your SCSI adapter. found USB scanner (vendor=0x067b, product=0x2303) at libusb:001:003-067b-2303-00-00 found USB scanner (vendor=0x04b8 [EPSON], product=0x011f [EPSON Scanner]) at libusb:002:002-04b8-011f-ff-ff # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. # You may want to run this program as root to find all devices. Once you # found the scanner devices, be sure to adjust access permissions as # necessary. Which sounds okay to me. Then: Andy-Whelans-Computer:~ andywhelan$ scanimage -L [sanei_debug] Setting debug level of snapscan to 2. [snapscan] add_usb_device: error opening device libusb:002:002-04b8-011f-ff-ff: Invalid argument And that's all I know. It sounds to me like SANE doesn't like what it's getting from libusb, but like I said, I'm pretty inexperienced with this stuff. Any help would be greatly appreciated. Andy -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20071217/3cfdde16/attachment.htm
