Ralf Haueisen schrieb: >> Ralf Haueisen schrieb: >>> Hi all. >>> >>> I am just working to get my Canon LiDE 90 working. I took in the >>> genesys_devices.c the LiDE60 an did some changes. I have a sniffer >>> log taken with usbsnoop. Some registers i could firgue out where to >>> set them. The image still looks like data is somehow scrambled. There >>> are some setting in the file for the DAC. (static >>> Genesys_Frontend Wolfson[] ) to which registers do these data belong? >>> >>> TIA, >>> Ralf >> The settings in the Genesys_Frontend structs go to the analog frontend >> via the serial interface at registers 0x3a/0x3b(FEWRDATA)+0x51(FEWRA), >> through sanei_genesys_fe_write_data. >> >> If you are receiving noise data, this may indicate that the byte order >> was swapped. You should check that the parallel interface to the >> frontend is setup correctly(registers 0x52 to 0x57). >> >> HTH, >> Pierre >> > > I can see a strcture in scan direction but if in directon of the senor > anything is semared out and noisy, just like i get an average value. >
Can you send a small image?
