Hi All, I am running FreeBSD 6.2 Stable on a T41 (Thinkpad). I have a Neatreceipts scanner. http://www.amazon.com/NeatReceipts-Scanalizer-Professional-Combination-Organization/dp/B000BBCKOC
I am not sure if anyone has used this in FreeBSD or if it even has a driver. I did not see it listed in SANE. But I am not sure if there is another brand name for it besides Neatreceipts. Here is what I see when I plug it in then unplug it. ugen0: vendor 0x07b3 600dpi USB Scanner, rev 1.10/5.01, addr 2 ugen0: at uhub1 port 2 (addr 2) disconnected All threads purged from ugen0.2 All threads purged from ugen0.1 All threads purged from ugen0 ugen0: detached My understanding was if the driver was recognized it would show as /dev/uscanner0. Here are the results of a SANE run: Gargoyle# sane-find-scanner -q found USB scanner (vendor=0x07b3, product=0x0412 [600dpi USB Scanner], chip=GT-6816) at libusb:/dev/usb1:/dev/ugen0 Gargoyle# scanimage -L device `gt68xx:libusb:/dev/usb1:/dev/ugen0' is a Plustek OpticSlim M12 flatbed scanner So it looks like the the Neatreceipts may be the same as the Plustek. But I am not sure if I am reading that correctly. What would a good next step be? Sincerely, Brendhan
