I have removed the circuit board and tried to reveal the chip used in the Lide 70 scanner. I hope this will help development of backend for this scanner.
Regards/ Greggan http://www.nabble.com/file/p10760511/lide70large.jpg cgi-mailer wrote: > > > > =========================================== > == Neuer Eintrag > =========================================== > > > ------------------------------------------- > -- Formular: 'adddev' > ------------------------------------------- > > 1. Your email address: > 'ajschult at verizon.net' > 2. Manufacturer (e.g. "Mustek"): > 'Canon' > 3. Model name (e.g. ScanExpress 1200UB): > 'CanoScan LiDE 70' > 4. Bus type: > 'USB' > 5. Vendor id (e.g. 0x001): > '0x04a9' > 6. Product id (e.g. 0x0002): > '0x2225' > 7. Chipset (e.g. lm9831): > '' > 8. Comments (e.g. similar to Mustek 1234): > 'Circuitry is covered by a metal plate that is welded on.' > 9. Data (e.g. sane-find-scanner -v -v): > 'Output from cat /proc/bus/usb/devices > T: Bus=08 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 > D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 > P: Vendor=04a9 ProdID=2225 Rev= 0.00 > S: Manufacturer=Canon > S: Product=CanoScan > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms' > > -- > sane-devel mailing list: sane-devel at lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/sane-devel > Unsubscribe: Send mail with subject "unsubscribe your_password" > to sane-devel-request at lists.alioth.debian.org > > -- View this message in context: http://www.nabble.com/Formulardaten-tf3218519.html#a10760511 Sent from the SANE - Dev mailing list archive at Nabble.com. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20070523/e29e6b39/attachment.htm
