I have changed my HP 7400c scanner connection from scsi to usb which gives me a strange problem. sane-find-scanner finds the scanner OK. xsane accesses the scanner correctly. scanimage -L hangs. Setting debug trace on I get:
[erik@epohost ~]$ SANE_DEBUG_AVISION=15 scanimage -L [sanei_debug] Setting debug level of avision to 15. [avision] sane_init:(Version: 1.0 Build: 229) [avision] sane_init: parsing config line "" [avision] sane_init: config file line 1: ignoring empty line [avision] sane_init: parsing config line "# This are the possible options. Normally any scanner" [avision] sane_init: config file line 2: ignoring comment line [avision] sane_init: parsing config line "# should work just fine without them - and they are only" [avision] sane_init: config file line 3: ignoring comment line [avision] sane_init: parsing config line "# needed for test and debugging. So if you experience problems" [avision] sane_init: config file line 4: ignoring comment line [avision] sane_init: parsing config line "# and you solve them with enabling options here, please notify" [avision] sane_init: config file line 5: ignoring comment line [avision] sane_init: parsing config line "# the SANE/Avision maintainer: Rene Rebe <r...@exactcode.de>" [avision] sane_init: config file line 6: ignoring comment line [avision] sane_init: parsing config line "" [avision] sane_init: config file line 7: ignoring empty line [avision] sane_init: parsing config line "#option disable-gamma-table" [avision] sane_init: config file line 8: ignoring comment line [avision] sane_init: parsing config line "#option disable-calibration" [avision] sane_init: config file line 9: ignoring comment line [avision] sane_init: parsing config line "#option force-a4" [avision] sane_init: config file line 10: ignoring comment line [avision] sane_init: parsing config line "" [avision] sane_init: config file line 11: ignoring empty line [avision] sane_init: parsing config line "#scsi AVISION" [avision] sane_init: config file line 12: ignoring comment line [avision] sane_init: parsing config line "#scsi FCPA" [avision] sane_init: config file line 13: ignoring comment line [avision] sane_init: parsing config line "#scsi MINOLTA" [avision] sane_init: config file line 14: ignoring comment line [avision] sane_init: parsing config line "#scsi MITSBISH MCA-S600C" [avision] sane_init: config file line 15: ignoring comment line [avision] sane_init: parsing config line "#scsi MITSBISH MCA-SS600" [avision] sane_init: config file line 16: ignoring comment line [avision] sane_init: parsing config line "#scsi HP" [avision] sane_init: config file line 17: ignoring comment line [avision] sane_init: parsing config line "#scsi hp" [avision] sane_init: config file line 18: ignoring comment line [avision] sane_init: parsing config line "" [avision] sane_init: config file line 19: ignoring empty line [avision] sane_init: parsing config line "#scsi /dev/scanner" [avision] sane_init: config file line 20: ignoring comment line [avision] sane_init: parsing config line "#usb libusb:001:003" [avision] sane_init: config file line 21: ignoring comment line [avision] sane_init: parsing config line "usb 0x03f0 0x0801" [avision] sane_init: config file line 22: trying to attach USB:`usb 0x03f0 0x0801' [avision] attach: [avision] attach: opening libusb:001:003 [avision] inquiry: length: 96 [avision] inquiry: inquiring ... [avision] filling command to have a length of 10, was: 6 [avision] Timeouts: write: 30000, read: 15000, status: 15000 [avision] try to write cmd, count: 10. [avision] wrote 10 bytes [avision] try to read 96 bytes [avision] read 96 bytes [avision] avision_usb_status: timeout 15000, 1 retries [avision] ==> (bulk read) going down ... [avision] <== (bulk read) got: 0, status: 0 [avision] ==> (interrupt read) going down ... [avision] <== (interrupt read) got: 1, status: 0 [avision] attach: Inquiry gives mfg=hp, model=scanjet 7400c, product revision=0.8S. [avision] attach: Found model: 57 [avision] inquiry: length: 96 [avision] inquiry: inquiring ... [avision] filling command to have a length of 10, was: 6 [avision] Timeouts: write: 30000, read: 15000, status: 15000 [avision] try to write cmd, count: 10. [avision] wrote 10 bytes [avision] try to read 96 bytes [avision] read 96 bytes [avision] avision_usb_status: timeout 15000, 1 retries [avision] ==> (bulk read) going down ... [avision] <== (bulk read) got: 0, status: 0 [avision] ==> (interrupt read) going down ... [avision] <== (interrupt read) got: 1, status: 0 [avision] inquiry: length: 136 [avision] inquiry: inquiring ... [avision] filling command to have a length of 10, was: 6 What can my problem be? -- Erik P. Olsen, MSc Solsortvej 30, DK-2000 Frederiksberg, Denmark Phone: +45 38346480, Fax: +45 32106480, Mobil: +45 40765300
