I've got a HP Scanjet 4600 connected to my Ubuntu. I saw that it was not support by SANE. I would know if any persons could write the driver for ? I can help a bit for technical aspects.
Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20070216/149e48ec/attachment.html From zekev...@linux.se Fri Feb 16 23:32:00 2007 From: zekev...@linux.se (Erik Svensson) Date: Fri Feb 16 23:56:04 2007 Subject: [sane-devel] Epson Perfection 2670 and debian sid Message-ID: <45d630e0.9080...@linux.se> I can't get it to work at all, it's detected when running sane-find-scanner and scanimage -L. I have downloaded and extract the latest firmware from epson and edit the /etc/sane.d/snapscan.conf to point to it. I'm running debians standard kernel v. 2.6.18-4. I also tried to rmmod ehci_hcd according to a tips on the list, but then the scanner isn't found at all. This is the debug output: $ export SANE_DEBUG_SNAPSCAN=128 $ scanimage -L [sanei_debug] Setting debug level of snapscan to 128. [snapscan] sane_snapscan_init [snapscan] sane_snapscan_init: Snapscan backend version 1.4.53 [snapscan] add_usb_device(libusb:003:006) [snapscan] add_usb_device: Detected (kind of) an USB device [snapscan] snapscani_usb_open(libusb:003:006) [snapscan] add_usb_device: Checking if 0x04b8 is a supported USB vendor ID [snapscan] snapscani_check_device() [snapscan] mini_inquiry [snapscan] snapscan_cmd [snapscan] snapscani_usb_cmd(0,0xbfbbc902,6,0xbfbbc8de,0xbfbbc908 (36)) [snapscan] atomic_usb_cmd(0,0xbfbbc902,6,0xbfbbc8de,0xbfbbc908 (36)) [snapscan] usb_cmd(0,0xbfbbc902,6,0xbfbbc8de,0xbfbbc908 (36)) [snapscan] usb_cmd: cmdlen=6, datalen=0 [snapscan] usb_write: writing: 0x12 0x00 0x00 0x00 0x24 0x00 [snapscan] Written 6 bytes [snapscan] usb_read: reading: 0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Read 8 bytes [snapscan] usb_read: reading: 0x06 0x00 0x02 0x02 0x49 0x00 0x00 0x00 0x45 0x50 ... [snapscan] Read 36 bytes [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Read 8 bytes [snapscan] snapscani_check_device: Is vendor "EPSON" model "EPSON Scanner" a supported scanner? [snapscan] snapscani_get_model_id(EPSON Scanner, 0, 2) [snapscan] snapscani_get_model_id: looking up scanner for ID 0x04b8,0x011f. [snapscan] snapscani_get_model_id: scanner identified [snapscan] snapscani_check_device: Autodetected driver: Perfection 1670 [snapscan] snapscani_usb_close(0) [snapscan] 1st read 3 write 1 [snapscan] snapscani_usb_cmd(0,0xbfbbc93e,6,0x0,0x0 (0)) [snapscan] atomic_usb_cmd(0,0xbfbbc93e,6,0x0,0x0 (0)) [snapscan] usb_cmd(0,0xbfbbc93e,6,0x0,0x0 (0)) [snapscan] usb_cmd: cmdlen=6, datalen=0 [snapscan] usb_write: writing: 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Written 6 bytes [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Read 8 bytes [snapscan] 2nd read 4 write 2 [snapscan] snapscani_init_device_structure() [snapscan] sane_snapscan_get_devices (0xbfbbdb08, 0) device `snapscan:libusb:003:006' is a EPSON EPSON Scanner flatbed scanner [snapscan] sane_snapscan_exit $ scanimage -T -d snapscan:libusb:003:006 -v -v [sanei_debug] Setting debug level of snapscan to 128. [snapscan] sane_snapscan_init [snapscan] sane_snapscan_init: Snapscan backend version 1.4.53 [snapscan] add_usb_device(libusb:003:006) [snapscan] add_usb_device: Detected (kind of) an USB device [snapscan] snapscani_usb_open(libusb:003:006) [snapscan] add_usb_device: Checking if 0x04b8 is a supported USB vendor ID [snapscan] snapscani_check_device() [snapscan] mini_inquiry [snapscan] snapscan_cmd [snapscan] snapscani_usb_cmd(0,0xbf89f5a2,6,0xbf89f57e,0xbf89f5a8 (36)) [snapscan] atomic_usb_cmd(0,0xbf89f5a2,6,0xbf89f57e,0xbf89f5a8 (36)) [snapscan] usb_cmd(0,0xbf89f5a2,6,0xbf89f57e,0xbf89f5a8 (36)) [snapscan] usb_cmd: cmdlen=6, datalen=0 [snapscan] usb_write: writing: 0x12 0x00 0x00 0x00 0x24 0x00 [snapscan] Written 6 bytes [snapscan] usb_read: reading: 0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Read 8 bytes [snapscan] usb_read: reading: 0x06 0x00 0x02 0x02 0x49 0x00 0x00 0x00 0x45 0x50 ... [snapscan] Read 36 bytes [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Read 8 bytes [snapscan] snapscani_check_device: Is vendor "EPSON" model "EPSON Scanner" a supported scanner? [snapscan] snapscani_get_model_id(EPSON Scanner, 0, 2) [snapscan] snapscani_get_model_id: looking up scanner for ID 0x04b8,0x011f. [snapscan] snapscani_get_model_id: scanner identified [snapscan] snapscani_check_device: Autodetected driver: Perfection 1670 [snapscan] snapscani_usb_close(0) [snapscan] 1st read 3 write 1 [snapscan] snapscani_usb_cmd(0,0xbf89f5de,6,0x0,0x0 (0)) [snapscan] atomic_usb_cmd(0,0xbf89f5de,6,0x0,0x0 (0)) [snapscan] usb_cmd(0,0xbf89f5de,6,0x0,0x0 (0)) [snapscan] usb_cmd: cmdlen=6, datalen=0 [snapscan] usb_write: writing: 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Written 6 bytes [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Read 8 bytes [snapscan] 2nd read 4 write 2 [snapscan] snapscani_init_device_structure() [snapscan] sane_snapscan_open (libusb:003:006, 0xbf8a07b8) [snapscan] find_device [snapscan] sane_snapscan_open: Allocating 64512 bytes as scanner buffer. [snapscan] sane_snapscan_open: allocated scanner structure at 0x8053b78 [snapscan] open_scanner [snapscan] snapscani_usb_open(libusb:003:006) [snapscan] sane_snapscan_open: waiting for scanner to warm up. [snapscan] wait_scanner_ready [snapscan] test_unit_ready [snapscan] snapscan_cmd [snapscan] snapscani_usb_cmd(0,0xbf8a05c6,6,0x0,0x0 (0)) [snapscan] atomic_usb_cmd(0,0xbf8a05c6,6,0x0,0x0 (0)) [snapscan] usb_cmd(0,0xbf8a05c6,6,0x0,0x0 (0)) [snapscan] usb_cmd: cmdlen=6, datalen=0 [snapscan] usb_write: writing: 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Written 6 bytes [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Read 8 bytes [snapscan] sane_snapscan_open: performing scanner self test. [snapscan] send_diagnostic [snapscan] snapscan_cmd [snapscan] snapscani_usb_cmd(0,0xbf8a0754,6,0x0,0x0 (0)) [snapscan] atomic_usb_cmd(0,0xbf8a0754,6,0x0,0x0 (0)) [snapscan] usb_cmd(0,0xbf8a0754,6,0x0,0x0 (0)) [snapscan] sane_snapscan_open: self test passed. [snapscan] inquiry [snapscan] snapscan_cmd [snapscan] snapscani_usb_cmd(0,0x8053ba8,6,0x805dde8,0x8053cb8 (120)) [snapscan] atomic_usb_cmd(0,0x8053ba8,6,0x805dde8,0x8053cb8 (120)) [snapscan] usb_cmd(0,0x8053ba8,6,0x805dde8,0x8053cb8 (120)) [snapscan] usb_cmd: cmdlen=6, datalen=0 [snapscan] usb_write: writing: 0x12 0x00 0x00 0x00 0x78 0x00 [snapscan] Written 6 bytes [snapscan] usb_read: reading: 0xf9 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Read 8 bytes [snapscan] usb_read: reading: 0x06 0x00 0x02 0x02 0x49 0x00 0x00 0x00 0x45 0x50 ... [snapscan] Read 120 bytes [snapscan] usb_read: reading: 0xfb 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Read 8 bytes [snapscan] inquiry: exposure time: 0.0 ms [snapscan] inquiry: ms per line: 0.000000 [snapscan] inquiry: G2R_DIFF: 0 [snapscan] inquiry: B2R_DIFF: 0 [snapscan] inquiry: Chroma offsets=0; Red=0, Green:=0, Blue=0 [snapscan] inquiry: hardware config = 0x00 [snapscan] inquiry: bits per pixel = 14 [snapscan] inquiry: pixels per scan line = 0 [snapscan] inquiry: bytes per scan line = 0 [snapscan] inquiry: number of scan lines = 0 [snapscan] inquiry: effective buffer size = 0 bytes, 0 lines [snapscan] inquiry: expected total scan data: 0 bytes [snapscan] Looking up 31 [snapscan] Downloading /lib/modules/esfw30.bin [snapscan] Size of firmware: 45364 [snapscan] snapscan_cmd [snapscan] snapscani_usb_cmd(0,0x806d9f0,45374,0x0,0x0 (0)) [snapscan] atomic_usb_cmd(0,0x806d9f0,45374,0x0,0x0 (0)) [snapscan] usb_cmd(0,0x806d9f0,45374,0x0,0x0 (0)) [snapscan] usb_cmd: cmdlen=10, datalen=45364 [snapscan] usb_write: writing: 0x2a 0x00 0x87 0x00 0x00 0x00 0x00 0xb1 0x34 0x00 [snapscan] Written 10 bytes [snapscan] usb_read: reading: 0xf8 0x00 0x00 0x00 0x00 0x00 0x00 0x00 [snapscan] Read 8 bytes [snapscan] usb_write: writing: 0x02 0xae 0x34 0x32 0xff 0xff 0xff 0xff 0xff 0xff ... [snapscan] usb_write Only 2560 bytes written [snapscan] Written 2560 bytes [snapscan] sane_snapscan_open: download_firmware command failed: Error during device I/O scanimage: open of device snapscan:libusb:003:006 failed: Error during device I/O Calling sane_exit [snapscan] sane_snapscan_exit scanimage: finished -- Cattle die, kinsmen die, thyself too soon must die, but one thing never, I ween, will die, fair fame of one who has earned. "Havamal" zekev...@linux.se http://zekevarg.homeip.net
