On Mon, 2006-08-14 at 23:00 +0200, Torben Bertram wrote: > Hi! I searched the database, but nothing helped me. > So I will ask you for help. > > http://oa.samsung.de/article.asp?artid=3C6280D5-8701-434A-A664-A28CB5131A74&show=feats > > My new Samsung SCX-4200 MFP works well, only the > scanning function isn't working. The included > driver (tested by Samsung on SuSE) makes the > printer running for my KUBUNTU 6.06, the driver is > in /etc/sane.d/samsung_scx4200.dll.conf included. > > lsusb says: > .... > Bus 003 Device 003: ID 04e8:341b Samsung > Electronics Co., Ltd > .... > > sane-find-scanner says: > found USB scanner (vendor=0x04e8, product=0x341b) > at libusb:003:003 and > found USB scanner (vendor=0x057c, product=0x5601) > at libusb:003:002 > > The last one is my WLAN device from AVM, Fritz USB > Stick, not really a scanner. > > Kooka crashes everytime sending the signal 11. > Xsane can't find a scanner. Samsung MPF driver > program can't find a scanner either. I use the SANE > version 1.0.14-1 and a Linux 2.6.15-26-386. > > Maybe it is only a small thing I miss..... But > what? This time any searches in forums doesn't > helped. Thankfully looking for your advice - > Torben from Germany. > > Torben Bertram > Carl-Severing-Str. 3 > D-28329 Bremen > Telefon +49(0)421 2443047 > Check with ls -l /proc/bus/usb/003/003 the permissions (for hotplug setup) Check with ls -l /dev/bus/usb/003/003 the permissions (for udev setup) See also www.sane-project.org/LINUX.readme file
If permissions not ok, check if your scanner is added to the libsane.rules file. -- -------- m.vr.gr. Gerard Klaver
