look at the end- scanimage: attempted to set inactive option frame
dont set that :) allan On Mon, 22 May 2006, Dietmar Segbert wrote: > Hello Rene, > hello list, > > thanks for your answers. > At first i have deleted the hpusbsci in /lib/modules/2.4.31/kernel/.... > I have donwloaded the avision.c and avision.h of the svn repository of the > avision-backend-page. > I compiled sane by ./configure make make install. > I set the rights of the scanner to rwrwrw (666). > scanimage -L finds the scanner. > i set the SANE_DEBUG-AVISION=7 and then i do the following command: > > scanimage -d avision --source adf --resolution 2820 --frame 1 >out%d.pnm > 2>error.log > > Here is the logfile: > > [sanei_debug] Setting debug level of avision to 7. > [avision] sane_init:(Version: 1.0 Build: 200) > [avision] sane_init: parsing config line "" > [avision] sane_init: config file line 1: ignoring empty line > [avision] sane_init: parsing config line "# This are the possible options. > Normally any scanner" > [avision] sane_init: config file line 2: ignoring comment line > [avision] sane_init: parsing config line "# should work just fine without > them - and they are only" > [avision] sane_init: config file line 3: ignoring comment line > [avision] sane_init: parsing config line "# needed for test and debugging. So > if you experience problems" > [avision] sane_init: config file line 4: ignoring comment line > [avision] sane_init: parsing config line "# and you solve them with enabling > options here, please notify" > [avision] sane_init: config file line 5: ignoring comment line > [avision] sane_init: parsing config line "# the SANE/Avision maintainer: Rene > Rebe <r...@exactcode.de>" > [avision] sane_init: config file line 6: ignoring comment line > [avision] sane_init: parsing config line "" > [avision] sane_init: config file line 7: ignoring empty line > [avision] sane_init: parsing config line "#option disable-gamma-table" > [avision] sane_init: config file line 8: ignoring comment line > [avision] sane_init: parsing config line "#option disable-calibration" > [avision] sane_init: config file line 9: ignoring comment line > [avision] sane_init: parsing config line "#option force-a4" > [avision] sane_init: config file line 10: ignoring comment line > [avision] sane_init: parsing config line "" > [avision] sane_init: config file line 11: ignoring empty line > [avision] sane_init: parsing config line "scsi AVISION" > [avision] sane_init: config file line 12: trying to attach SCSI: scsi AVISION' > [avision] sane_init: parsing config line "#scsi FCPA" > [avision] sane_init: config file line 13: ignoring comment line > [avision] sane_init: parsing config line "scsi MINOLTA" > [avision] sane_init: config file line 14: trying to attach SCSI: scsi MINOLTA' > [avision] sane_init: parsing config line "#scsi MITSBISH MCA-S600C" > [avision] sane_init: config file line 15: ignoring comment line > [avision] sane_init: parsing config line "#scsi MITSBISH MCA-SS600" > [avision] sane_init: config file line 16: ignoring comment line > [avision] sane_init: parsing config line "#scsi HP" > [avision] sane_init: config file line 17: ignoring comment line > [avision] sane_init: parsing config line "#scsi hp" > [avision] sane_init: config file line 18: ignoring comment line > [avision] sane_init: parsing config line "" > [avision] sane_init: config file line 19: ignoring empty line > [avision] sane_init: parsing config line "#scsi /dev/sg5" > [avision] sane_init: config file line 20: ignoring comment line > [avision] sane_init: parsing config line "# usb libusb:002:003" > [avision] sane_init: config file line 21: ignoring comment line > [avision] sane_init: parsing config line "# usb 0x03f0 0x0701" > [avision] sane_init: config file line 22: ignoring comment line > [avision] sane_init: parsing config line "usb 0x0638 0x026a" > [avision] sane_init: config file line 23: trying to attach USB:`usb 0x0638 > 0x026a' > [avision] attach: > [avision] attach: opening libusb:004:002 > [avision] inquiry: 96 > [avision] attach: sending INQUIRY > [avision] filling command to have a length of 10, was: 6 > [avision] Timeouts: write: 30000, read: 1500, status: 1500 > [avision] avision_usb_status: timeout 1500, 1 retries > [avision] ==> (bulk read) going down ... > [avision] <== (bulk read) got: 0, status: 0 > [avision] ==> (interrupt read) going down ... > [avision] <== (interrupt read) got: 1, status: 0 > [avision] attach: Inquiry gives mfg=MINOLTA, model=FS-V1, product > revision=1.26. > [avision] attach: Found model: 55 > [avision] inquiry: 96 > [avision] attach: sending INQUIRY > [avision] filling command to have a length of 10, was: 6 > [avision] Timeouts: write: 30000, read: 1500, status: 1500 > [avision] avision_usb_status: timeout 1500, 1 retries > [avision] ==> (bulk read) going down ... > [avision] <== (bulk read) got: 0, status: 0 > [avision] ==> (interrupt read) going down ... > [avision] <== (interrupt read) got: 1, status: 0 > [avision] attach: raw data: > [avision] [0] 00000110b 6o 6d 6x > [avision] [1] 10000000b 200o 128d 80x > [avision] [2] 00000010b 2o 2d 2x > [avision] [3] 01000010b 102o 66d 42x > [avision] [4] 01011011b 133o 91d 5bx > [avision] [5] 00000000b 0o 0d 0x > [avision] [6] 00000000b 0o 0d 0x > [avision] [7] 00000000b 0o 0d 0x > [avision] [8] 01001101b 115o 77d 4dx > [avision] [9] 01001001b 111o 73d 49x > [avision] [10] 01001110b 116o 78d 4ex > [avision] [11] 01001111b 117o 79d 4fx > [avision] [12] 01001100b 114o 76d 4cx > [avision] [13] 01010100b 124o 84d 54x > [avision] [14] 01000001b 101o 65d 41x > [avision] [15] 00100000b 40o 32d 20x > [avision] [16] 01000110b 106o 70d 46x > [avision] [17] 01010011b 123o 83d 53x > [avision] [18] 00101101b 55o 45d 2dx > [avision] [19] 01010110b 126o 86d 56x > [avision] [20] 00110001b 61o 49d 31x > [avision] [21] 00100000b 40o 32d 20x > [avision] [22] 00100000b 40o 32d 20x > [avision] [23] 00100000b 40o 32d 20x > [avision] [24] 00100000b 40o 32d 20x > [avision] [25] 00100000b 40o 32d 20x > [avision] [26] 00100000b 40o 32d 20x > [avision] [27] 00100000b 40o 32d 20x > [avision] [28] 00100000b 40o 32d 20x > [avision] [29] 00100000b 40o 32d 20x > [avision] [30] 00100000b 40o 32d 20x > [avision] [31] 00100000b 40o 32d 20x > [avision] [32] 00110001b 61o 49d 31x > [avision] [33] 00101110b 56o 46d 2ex > [avision] [34] 00110010b 62o 50d 32x > [avision] [35] 00110110b 66o 54d 36x > [avision] [36] 10100000b 240o 160d a0x > [avision] [37] 00000011b 3o 3d 3x > [avision] [38] 00000110b 6o 6d 6x > [avision] [39] 11100111b 347o 231d e7x > [avision] [40] 00001011b 13o 11d bx > [avision] [41] 00000100b 4o 4d 4x > [avision] [42] 00001011b 13o 11d bx > [avision] [43] 00000100b 4o 4d 4x > [avision] [44] 00001011b 13o 11d bx > [avision] [45] 00000100b 4o 4d 4x > [avision] [46] 00001011b 13o 11d bx > [avision] [47] 00000100b 4o 4d 4x > [avision] [48] 00000000b 0o 0d 0x > [avision] [49] 00000000b 0o 0d 0x > [avision] [50] 11011001b 331o 217d d9x > [avision] [51] 10010100b 224o 148d 94x > [avision] [52] 11111010b 372o 250d fax > [avision] [53] 00001000b 10o 8d 8x > [avision] [54] 00000100b 4o 4d 4x > [avision] [55] 00000100b 4o 4d 4x > [avision] [56] 00000010b 2o 2d 2x > [avision] [57] 00001000b 10o 8d 8x > [avision] [58] 00001000b 10o 8d 8x > [avision] [59] 00001000b 10o 8d 8x > [avision] [60] 11000000b 300o 192d c0x > [avision] [61] 11010000b 320o 208d d0x > [avision] [62] 10101000b 250o 168d a8x > [avision] [63] 00000101b 5o 5d 5x > [avision] [64] 00000001b 1o 1d 1x > [avision] [65] 00000001b 1o 1d 1x > [avision] [66] 00000010b 2o 2d 2x > [avision] [67] 00000011b 3o 3d 3x > [avision] [68] 00000100b 4o 4d 4x > [avision] [69] 00000101b 5o 5d 5x > [avision] [70] 00000000b 0o 0d 0x > [avision] [71] 00000000b 0o 0d 0x > [avision] [72] 00000000b 0o 0d 0x > [avision] [73] 00000000b 0o 0d 0x > [avision] [74] 00000000b 0o 0d 0x > [avision] [75] 00001111b 17o 15d fx > [avision] [76] 11111111b 377o 255d ffx > [avision] [77] 00000000b 0o 0d 0x > [avision] [78] 00000000b 0o 0d 0x > [avision] [79] 00000000b 0o 0d 0x > [avision] [80] 00000000b 0o 0d 0x > [avision] [81] 00001010b 12o 10d ax > [avision] [82] 10000000b 200o 128d 80x > [avision] [83] 00001111b 17o 15d fx > [avision] [84] 11000000b 300o 192d c0x > [avision] [85] 00001010b 12o 10d ax > [avision] [86] 10000000b 200o 128d 80x > [avision] [87] 00001111b 17o 15d fx > [avision] [88] 11000000b 300o 192d c0x > [avision] [89] 00001011b 13o 11d bx > [avision] [90] 00000100b 4o 4d 4x > [avision] [91] 00000011b 3o 3d 3x > [avision] [92] 00000000b 0o 0d 0x > [avision] [93] 00100000b 40o 32d 20x > [avision] [94] 00000000b 0o 0d 0x > [avision] [95] 00000000b 0o 0d 0x > [avision] attach: [8-15] Vendor id.: "MINOLTA " > [avision] attach: [16-31] Product id.: "FS-V1 " > [avision] attach: [32-35] Product rev.: "1.26" > [avision] attach: [36] Bitfield: ADF 3-pass color RGB color plane > [avision] attach: [37] Optical res.: 300 dpi > [avision] attach: [38] Maximum res.: 600 dpi > [avision] attach: [39] Bitfield1: TRANS Q_SCAN EXTENDED_RES NEW_PROTOCOL > AVISION > [avision] attach: [40-41] X res. in gray: 2820 dpi > [avision] attach: [42-43] Y res. in gray: 2820 dpi > [avision] attach: [44-45] X res. in color: 2820 dpi > [avision] attach: [46-47] Y res. in color: 2820 dpi > [avision] attach: [48-49] USB max read: 0 > [avision] attach: [50] ESA1: LIGHT_CONTROL BUTTON_CONTROL SW_CALIB > NEED_SW_GAMMA XYRES_DIFFERENT > [avision] attach: [51] ESA2: EXPOSURE_CTRL SUPPORTS_QUALITY_SPEED_CAL > HAS_PUSH_BUTTON > [avision] attach: [52] ESA3: GRAY_WHITE SUPPORTS_GAIN_CONTROL SUPPORTS_TET > 3x3COL_TABLE 1x3FILTER POWER_SAVING_TIMER > [avision] attach: [53] line difference (software color pack): 8 > [avision] attach: [54] color mode pixel boundary: 4 > [avision] attach: [55] gray mode pixel boundary: 4 > [avision] attach: [56] 4bit gray mode pixel boundary: 2 > [avision] attach: [57] lineart mode pixel boundary: 8 > [avision] attach: [58] halftone mode pixel boundary: 8 > [avision] attach: [59] error-diffusion mode pixel boundary: 8 > [avision] attach: [60] channels per pixel: 1 3 > [avision] attach: [61] bits per channel: 1 4 8 > [avision] attach: [62] scanner type: Flatbed Flatbed (ADF) Film scanner > [avision] attach: [75-76] Max shading target : fff > [avision] attach: [77-78] Max X of transparency: 0 dots * base_dpi > [avision] attach: [79-80] Max Y of transparency: 0 dots * base_dpi > [avision] attach: [81-82] Max X of flatbed: 2688 dots * base_dpi > [avision] attach: [83-84] Max Y of flatbed: 4032 dots * base_dpi > [avision] attach: [85-86] Max X of ADF: 2688 dots * base_dpi > [avision] attach: [87-88] Max Y of ADF: 4032 dots * base_dpi > [avision] attach: [89-90] Res. in Ex. mode: 2820 dpi > [avision] attach: [91] ASIC: 3 > [avision] attach: [92] Buttons: 0 > [avision] attach: [93] ESA4: NO_SINGLE_CHANNEL_GRAY_MODE > [avision] attach: [94] ESA5: > [avision] attach: [95] ESA6: > [avision] attach: optical resolution set to: 2820 dpi > [avision] attach: max resolution set to: 2820 dpi > [avision] attach: max channels per pixel: 3, max bits per channel: 8 > [avision] attach: x/y-range for mode 0 is valid! > [avision] attach: Mode 0 range is now: 24.311064 x 36.316596 mm. > [avision] attach: x/y-range for mode 1 is invalid! Using a default. > [avision] attach: Mode 1 range is now: 215.900000 x 299.720000 mm. > [avision] attach: x/y-range for mode 2 is valid! > [avision] attach: Mode 2 range is now: 24.311064 x 36.316596 mm. > [avision] sane_init: parsing config line "" > [avision] sane_init: config file line 24: ignoring empty line > [avision] sane_init: Trying to find USB device 638 a27 ... > [avision] sane_init: Trying to find USB device 638 a3c ... > [avision] sane_init: Trying to find USB device 638 a33 ... > [avision] sane_init: Trying to find USB device 638 a24 ... > [avision] sane_init: Trying to find USB device 638 a25 ... > [avision] sane_init: Trying to find USB device 638 a3a ... > [avision] sane_init: Trying to find USB device 638 a23 ... > [avision] sane_init: Trying to find USB device 638 a2a ... > [avision] sane_init: Trying to find USB device 638 a2a ... > [avision] sane_init: Trying to find USB device 638 a19 ... > [avision] sane_init: Trying to find USB device 638 a41 ... > [avision] sane_init: Trying to find USB device 638 a16 ... > [avision] sane_init: Trying to find USB device 638 a13 ... > [avision] sane_init: Trying to find USB device 638 a18 ... > [avision] sane_init: Trying to find USB device 638 a66 ... > [avision] sane_init: Trying to find USB device 638 a40 ... > [avision] sane_init: Trying to find USB device 638 a68 ... > [avision] sane_init: Trying to find USB device 638 a61 ... > [avision] sane_init: Trying to find USB device 638 a45 ... > [avision] sane_init: Trying to find USB device 3f0 701 ... > [avision] sane_init: Trying to find USB device 3f0 701 ... > [avision] sane_init: Trying to find USB device 3f0 801 ... > [avision] sane_init: Trying to find USB device 3f0 b01 ... > [avision] sane_init: Trying to find USB device 638 26a ... > [avision] attach: > [avision] sane_init: Trying to find USB device 686 4004 ... > [avision] sane_init: Trying to find USB device 686 400d ... > [avision] sane_init: Trying to find USB device 686 400e ... > [avision] sane_init: Trying to find USB device 638 a15 ... > [avision] sane_init: Trying to find USB device 638 a16 ... > [avision] sane_init: Trying to find USB device 4c5 1029 ... > [avision] sane_init: Trying to find USB device 40a 6001 ... > [avision] sane_init: Trying to find USB device 40a 6002 ... > [avision] sane_init: Trying to find USB device 40a 6003 ... > [avision] sane_init: Trying to find USB device 40a 6004 ... > [avision] sane_init: Trying to find USB device 40a 6005 ... > [avision] sane_init: Trying to find USB device 638 268 ... > [avision] sane_init: Trying to find USB device 4a7 449 ... > [avision] sane_init: Trying to find USB device 4a7 44c ... > [avision] sane_init: Trying to find USB device 4a7 475 ... > [avision] sane_open: > [avision] sane_open: using open_extended > [avision] sane_open: got 1048576 scsi_max_request_size > [avision] inquiry: 96 > [avision] attach: sending INQUIRY > [avision] filling command to have a length of 10, was: 6 > [avision] Timeouts: write: 30000, read: 1500, status: 1500 > [avision] avision_usb_status: timeout 1500, 1 retries > [avision] ==> (bulk read) going down ... > [avision] <== (bulk read) got: 0, status: 0 > [avision] ==> (interrupt read) going down ... > [avision] <== (interrupt read) got: 1, status: 0 > [avision] wait_ready: sending TEST_UNIT_READY > [avision] filling command to have a length of 10, was: 6 > [avision] Timeouts: write: 30000, read: 1500, status: 1500 > [avision] avision_usb_status: timeout 1500, 1 retries > [avision] ==> (bulk read) going down ... > [avision] <== (bulk read) got: 0, status: 0 > [avision] ==> (interrupt read) going down ... > [avision] <== (interrupt read) got: 1, status: 0 > [avision] get_frame_info: > [avision] Timeouts: write: 30000, read: 30000, status: 10000 > [avision] avision_usb_status: timeout 10000, 1 retries > [avision] ==> (interrupt read) going down ... > [avision] <== (interrupt read) got: 1, status: 0 > [avision] get_frame_info: raw data > [avision] [0] 11111111b 377o 255d ffx > [avision] [1] 10000000b 200o 128d 80x > [avision] [2] 00000010b 2o 2d 2x > [avision] [3] 01000010b 102o 66d 42x > [avision] [4] 01011011b 133o 91d 5bx > [avision] [5] 00000000b 0o 0d 0x > [avision] [6] 00000000b 0o 0d 0x > [avision] [7] 00000000b 0o 0d 0x > [avision] get_frame_info: [0] Holder type: Empty > [avision] get_frame_info: [1] Current frame number: 128 > [avision] get_frame_info: [2] Frame ammount: 2 > [avision] get_frame_info: [3] Mode: Not APS > [avision] get_frame_info: [3] Exposures (if APS): Unknown > [avision] get_frame_info: [3] Film Type (if APS): B&W Negative > [avision] add_color_mode: 0 Lineart > [avision] add_color_mode: 1 Dithered > [avision] add_color_mode: 2 Gray > [avision] add_color_mode: 5 Color > [avision] init_options: > [avision] init_options: dpi_range.min set to 100 > [avision] max_string_size: > [avision] match_color_mode: > [avision] match_color_mode: found at 3 mode: 5 > [avision] max_string_size: > [avision] match_source_mode: "Normal" > [avision] match_source_mode: found at 0 mode: 0 > [avision] match_source_mode_dim: 0 > [avision] sane_control_option: option=0, action=0 > [avision] sane_control_option: option=0, action=0 > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_control_option: option=10, action=0 > [avision] sane_get_option_descriptor: > [avision] sane_control_option: option=11, action=0 > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_control_option: option=8, action=0 > [avision] sane_control_option: option=9, action=0 > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_control_option: option=6, action=1 > [avision] constrain_value: > [avision] match_source_mode: "ADF" > [avision] match_source_mode: found at 1 mode: 2 > [avision] match_source_mode_dim: 2 > [avision] sane_control_option: option=0, action=0 > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_control_option: option=10, action=0 > [avision] sane_get_option_descriptor: > [avision] sane_control_option: option=11, action=0 > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_control_option: option=8, action=0 > [avision] sane_control_option: option=9, action=0 > [avision] sane_get_option_descriptor: > [avision] sane_get_option_descriptor: > [avision] sane_control_option: option=3, action=1 > [avision] constrain_value: > [avision] sane_get_option_descriptor: > scanimage: attempted to set inactive option frame > [avision] sane_close: > [avision] sane_exit: > > > But the scanner did nothing. > > Thanks for your help. > > Dietmar > > -- "so don't tell us it can't be done, putting down what you don't know. money isn't our god, integrity will free our souls" - Max Cavalera
