On Sunday 30 April 2006 10:28, Florian Otto wrote: > Hi > > i connected two scanner to my linux computer. but scanimage -L only detecs > one. > > server:~# lsusb > Bus 004 Device 001: ID 0000:0000 > Bus 003 Device 001: ID 0000:0000 > Bus 002 Device 002: ID 04a9:220d Canon, Inc. CanoScan N670U/N676U/LiDE 20 > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 005: ID 04a9:2206 Canon, Inc. CanoScan N650U/N656U > Bus 001 Device 003: ID 04e8:3268 Samsung Electronics Co., Ltd > Bus 001 Device 001: ID 0000:0000 > > > server:~# sane-find-scanner -q > found USB scanner (vendor=0x04a9 [Canon], product=0x220d [CanoScan], > chip=LM9832/3) at libusb:002:002 found USB scanner (vendor=0x04a9 [Canon], > product=0x2206 [CanoScan], chip=LM9832/3) at libusb:001:005 > > > server:~# scanimage -L > device `plustek:libusb:001:005' is a Canon N650U/N656U USB flatbed scanner > > > But both work if only one is connected. Do i have to configure something > else?
Hi, you should add another entry like this to your plustek.conf file (/etc/sane.d/): [usb] device auto In the end you need two entries like these there, then it should be possible to work with both scanners. HTH Gerhard
