Hello Henning,
I got name of chipset its a GL646_HP. total output for umax
astra 4100 of sane-find-scanner is =>
found USB scanner (vendor=0x0461 [Primax],
product=0x038c [USB
Scanner], chip=GL646_HP) at libusb:004:002
One more thing i want to ask to develop a driver for this UMAX
Astra 4100 i think i need to add backend in sane-backends source package and
install it on RHEL to have it working fine. Is that right? and xsane will
then recognise this scanner.
Please correct me.
regards,
Parag.
On 11/25/05, Henning Meier-Geinitz <henn...@meier-geinitz.de> wrote:
>
> Hi,
>
> On Fri, Nov 25, 2005 at 01:09:49PM +0530, Parag N wrote:
> > I want to know is there any Documentation that states how to
> write
> > driver for scanner umax astra 4100?
>
> As of now, it's not even listed in our database so we (at least me)
> don't know anything about this scanner. I saw that you created a
> report about that scanner but your "sane-find-scanner -v -v" output
> contains no information about the scanner. That means it was not
> plugged in or its power cable (if any) is not connected. Please send
> the output again when the scanner is connected. This way we can at
> least check if the chipset of this scanner is known.
>
> Bye,
> Henning
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20051128/060976ed/attachment.html
From mattias.ell...@tsl.uu.se Mon Nov 28 05:16:16 2005
From: mattias.ell...@tsl.uu.se (Mattias Ellert)
Date: Mon Nov 28 05:37:36 2005
Subject: [sane-devel] UMAX Astra 1200S-C SCSI Scanner on Mac 10.2.8
In-Reply-To: <05cf119a-3ccb-11da-b139-000393b06...@mindspring.com>
References: <05cf119a-3ccb-11da-b139-000393b06...@mindspring.com>
Message-ID: <1133154976.30998.7.camel@localhost.localdomain>
On Fri, 2005-10-14 at 08:56 -0700, J.J.Sroka wrote:
> With the line scsi UMAX * Scanner * * * 0
>
> and setenv SANE_DEBUG_UMAX 12
>
> ./scanimage finds NO scanners
>
> ./sane-find-scanner finds EIGHT scanners.
>
>
>
> With the line scsi UMAX * Scanner
>
> and setenv SANE_DEBUG_UMAX 12
>
> ./scanimage finds SEVEN scanners
>
> ./sane-find-scanner finds EIGHT scanners.
Hi!
Some more debugging messages has been added to the SANE SCSI code. So by
using a sane-backends from after 2005-11-22 and setting
SANE_DEBUG_SANEI_SCSI you might get some hints on what is going wrong.
Mattias
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 1230 bytes
Desc: not available
Url :
http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20051128/9d8d0f0c/smime.bin
From lno...@dragon.unideb.hu Mon Nov 28 09:49:50 2005
From: lno...@dragon.unideb.hu (Levente =?ISO-8859-1?Q?Nov=E1k?=)
Date: Mon Nov 28 09:52:53 2005
Subject: [sane-devel] Epson PF 3490: still lineart combing at 3200 dpi
Message-ID: <1133171390.22664.8.ca...@novak.chem.klte.hu>
Hi Oliver,
The new CVS code did not completely solve the remaining interlacing
problems at 3200 dpi. While now grayscale work well at both 8bit and
16bit, lineart is still combing, but rather differently than before. Now
interlacing is periodically present or absent by blocks of 8 vertical
scancolumns, as can be seen in the attached picture.
Levente
-------------- next part --------------
A non-text attachment was scrubbed...
Name: lineart.png
Type: image/png
Size: 6600 bytes
Desc: not available
Url :
http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20051128/21786f21/lineart-0001.png
From li...@nabble.com Mon Nov 28 13:37:13 2005
From: li...@nabble.com (deif (sent by Nabble.com))
Date: Mon Nov 28 13:37:29 2005
Subject: [sane-devel] Re: Re: Re: Re: CanoScan LiDE 25
In-Reply-To: <20051127145633.gg6...@meier-geinitz.de>
References: <1026145...@web.de> <200507141336.16730.gerh...@gjaeger.de>
<1026275...@web.de> <200507141604.00651.gerh...@gjaeger.de>
<42da2e42.3090...@web.de> <200507180824.08510.gerh...@gjaeger.de>
<42db4ac1.9040...@web.de> <200507181026.58517.gerh...@gjaeger.de>
<42db57bc.5040...@web.de> <200507181159.44191.gerh...@gjaeger.de>
<1603536.p...@talk.nabble.com>
<200511230823.54672.gerh...@gjaeger.de>
<1624192.p...@talk.nabble.com>
<200511241319.56082.gerh...@gjaeger.de>
<1668740.p...@talk.nabble.com>
<20051127145633.gg6...@meier-geinitz.de>
Message-ID: <1679829.p...@talk.nabble.com>
its working fine now
getting started with linux is hard sometimes :)
I dont know if its a problem with my distribution or with sane but I had to add
the scanner to /etc/hotplug/usb/libsane.usermap
thx a lot
bye
--
Sent from the SANE - Dev forum at Nabble.com:
http://www.nabble.com/CanoScan-LiDE-25-t145756.html#a1679829
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20051128/08e2612c/attachment.htm
From panem...@gmail.com Mon Nov 28 13:58:13 2005
From: panem...@gmail.com (Parag N)
Date: Mon Nov 28 13:58:18 2005
Subject: [sane-devel] help about canon cannoscan LiDE30
Message-ID: <f4586a2e0511280558g7d6ec808i1fc1b70d5bccc...@mail.gmail.com>
hello,
I check with sane-backend source package for Cannon LiDE30 scanner
files but didn't get any enrty for that rather other LiDE entries i got in
genesys.conf and genesys_devices.c What information i want to know is that
how can i identify on which /dev/??? file this cannon is mounted and which
source lines are written for this sacnner to work?
Thanks and Regards,
Parag.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20051128/bdd72c57/attachment.html
From gerh...@gjaeger.de Mon Nov 28 14:13:08 2005
From: gerh...@gjaeger.de (Gerhard Jaeger)
Date: Mon Nov 28 14:13:45 2005
Subject: [sane-devel] help about canon cannoscan LiDE30
In-Reply-To: <f4586a2e0511280558g7d6ec808i1fc1b70d5bccc...@mail.gmail.com>
References: <f4586a2e0511280558g7d6ec808i1fc1b70d5bccc...@mail.gmail.com>
Message-ID: <200511281513.08866.gerh...@gjaeger.de>
On Monday 28 November 2005 14:58, Parag N wrote:
> hello,
> I check with sane-backend source package for Cannon LiDE30 scanner
> files but didn't get any enrty for that rather other LiDE entries i got in
> genesys.conf and genesys_devices.c What information i want to know is that
> how can i identify on which /dev/??? file this cannon is mounted and which
> source lines are written for this sacnner to work?
>
> Thanks and Regards,
> Parag.
>
guess you need to check again AND more carefully!
Gerhard
