Hello, On Oct 29 15:26 Franz Brandner wrote (shortened): > Priniting works perfectly with HP's PSC 1510 using HPLIP and HPLIP-HPIJS > after > I got the appropriate PPD, but it won't scan. Trying to install the device as > a scanner with YaST it is listed as "USB scanner, vendor HP, PSC 1500 > series", as there is no entry for it then in the list of known devices I > selected "HP - Most Multifunction devices, driver HPAIO" (as recommended), > result: the driver is running, but there is no active scanner. With HPOJ and > the driver for the PSC 1300 series (similar model, HP said) the result was > the same. The command "sane-find-scanner" also tells me that it should work, > "sanimage -L" finds nothing. I ran all these commands as ordinary user and > root as well. "/sbin/lsusb" lists it as "Bus 001 Device 004: ID ...
Make sure the hplip service is up and running, see http://portal.suse.com/sdb/en/2005/03/jsmeix_scanner-setup-93.html Use rchplip status which should report at least ----------------------------------------------------------------- hpiod (pid 1234) is running... hpssd (pid 5678) is running... ----------------------------------------------------------------- To get the last 40 (error)-messages from the hplip service, use egrep -i 'hplip|hpiod|hpssd' /var/log/messages | tail -n40 For debugging, see http://portal.suse.com/sdb/en/2004/10/jsmeix_scanner-setup-92.html "Trouble-Shooting (Debugging)" Kind Regards Johannes Meixner -- SUSE LINUX Products GmbH, Maxfeldstrasse 5 Mail: jsm...@suse.de 90409 Nuernberg, Germany WWW: http://www.suse.de/
