Hello there, I have an Canoscan LIDE30, support in backend x.x.16. I use Fedora 4 as operating system and installed the SANE package from RPM. SANE will recognize the usb-device as a scanner but won't make a device for it. I get a "[plustek] sanei_access_lock failed: 11" please tell me how to avoid this and getting the scanner working.
The following output I get from scanimage -T : ---------------------------------------------------------------------------------------------------------------------------------------------------------- [sanei_debug] Setting debug level of dll to 12. [dll] sane_init: SANE dll backend version 1.0.11 from sane-backends 1.0.16 [dll] sane_init: reading dll.conf [dll] add_backend: adding backend `plustek' [dll] sane_get_devices [dll] load: searching backend `plustek' in `/usr/lib/sane' [dll] load: trying to load `/usr/lib/sane/libsane-plustek.so.1' [dll] load: dlopen()ing `/usr/lib/sane/libsane-plustek.so.1' [dll] init: initializing backend `plustek' [sanei_debug] Setting debug level of plustek to 12. [sanei_debug] Setting debug level of sanei_usb to 128. [sanei_usb] sanei_usb_init: can't stat /dev/usb/: No such file or directory usb_set_debug: Setting debugging level to 255 (on) usb_os_find_busses: Found 006 usb_os_find_busses: Found 005 usb_os_find_busses: Found 004 usb_os_find_busses: Found 003 usb_os_find_busses: Found 002 usb_os_find_busses: Found 001 usb_os_find_busses: Skipping non bus directory devices usb_os_find_devices: Found 001 on 006 usb_os_find_devices: Found 003 on 005 usb_os_find_devices: Found 001 on 005 error obtaining child information: Inappropriate ioctl for device usb_os_find_devices: Found 001 on 004 usb_os_find_devices: Found 001 on 003 usb_os_find_devices: Found 001 on 002 usb_os_find_devices: Found 001 on 001 [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub [sanei_usb] sanei_usb_init: found libusb device (0x04a9/0x220e) interface 0 at libusb:005:003 [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub [sanei_usb] sanei_usb_init: device 0x0000/0x0000 looks like a root hub [sanei_usb] sanei_usb_init: found 1 devices [plustek] Plustek backend V0.49-7, part of sane-backends 1.0.16 [plustek] Retrieving all supported and conntected devices [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0010 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0011 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0015 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0013 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0013 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0011 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0010 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0015 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0016 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0007 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x000f [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x000f [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0005 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0012 [sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1000 [sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1001 [sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1001 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2007 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2008 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2009 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2013 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2015 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2016 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0505 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0605 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010f [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011d [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0050 [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0060 [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0160 [sanei_usb] sanei_usb_find_devices: vendor=0x049f, product=0x001a [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2206 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2207 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2208 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x220d [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x220e [plustek] Available and supported devices: [plustek] Device: >libusb:005:003< - 0x04a9x0x220e [plustek] ># Plustek-SANE Backend configuration file< [plustek] ># For use with LM9831/2/3 based USB scanners< [plustek] >#< [plustek] >< [plustek] ># each device needs at least two lines:< [plustek] ># - [usb] vendor-ID and product-ID< [plustek] ># - device devicename< [plustek] ># i.e. for Plustek (0x07B3) UT12/16/24 (0x0017)< [plustek] ># [usb] 0x07B3 0x0017< [plustek] ># device /dev/usb/scanner0< [plustek] ># or< [plustek] ># device libusb:bbb:ddd< [plustek] ># where bbb is the busnumber and ddd the device number< [plustek] ># make sure that your user has access to /proc/bus/usb/bbb/ddd< [plustek] >#< [plustek] ># additionally you can specify some options< [plustek] ># warmup, lOffOnEnd, lampOff< [plustek] >#< [plustek] ># For autodetection use< [plustek] ># [usb]< [plustek] ># device /dev/usb/scanner0< [plustek] >#< [plustek] ># or simply< [plustek] ># [usb]< [plustek] >#< [plustek] ># or if you want a specific device but you have no idea about the< [plustek] ># device node or you use libusb, simply set vendor- and product-ID< [plustek] ># [usb] 0x07B3 0x0017< [plustek] ># device auto< [plustek] >#< [plustek] ># NOTE: autodetection is safe, as it uses the info it got< [plustek] ># from the USB subsystem. If you're not using the< [plustek] ># autodetection, you MUST have attached that device< [plustek] ># at your USB-port, that you have specified...< [plustek] >#< [plustek] >< [plustek] >[usb] 0x04a9 0x220e< [plustek] next device is a USB device (0x04A9-0x220E) [plustek] ... next device [plustek] >< [plustek] >device libusb:005:003< [plustek] Decoding device name >libusb:005:003< [plustek] >#device auto< [plustek] >< [plustek] >#[usb]< [plustek] >< [plustek] >#< [plustek] ># options for the previous USB entry< [plustek] >#< [plustek] ># switch lamp off after xxx secs, 0 disables the feature< [plustek] ># (can also be set via frontend)< [plustek] >#option lampOff 300< [plustek] >< [plustek] ># warmup period in seconds, 0 means no warmup, -1 means auto-warmup< [plustek] ># (can also be set via frontend)< [plustek] >#option warmup -1< [plustek] >< [plustek] ># 0 means leave lamp-status untouched, not 0 means switch off< [plustek] ># on sane_close< [plustek] ># (can also be set via frontend)< [plustek] >#option lOffOnEnd 1< [plustek] >< [plustek] >#< [plustek] ># options to tweak the image start-position< [plustek] ># (WARNING: there's no internal range check!!!)< [plustek] >#< [plustek] ># for the normal scan area< [plustek] >#< [plustek] >#option posOffX 0< [plustek] >#option posOffY 0< [plustek] >< [plustek] ># for transparencies< [plustek] >#option tpaOffX 0< [plustek] >#option tpaOffY 0< [plustek] >< [plustek] ># for negatives< [plustek] >#option negOffX 0< [plustek] >#option negOffY 0< [plustek] >< [plustek] >#< [plustek] ># for setting the calibration strip position< [plustek] ># (WARNING: there's no internal range check!!!)< [plustek] ># -1 means use built in< [plustek] ># (can also be set via frontend)< [plustek] >#option posShadingY -1< [plustek] >#option tpaShadingY -1< [plustek] >#option negShadingY -1< [plustek] >< [plustek] >#< [plustek] ># to invert the negatives, 0 disables the feature< [plustek] >#< [plustek] >#option invertNegatives 0< [plustek] >< [plustek] >#< [plustek] ># to disable the internal sensor speedup function,< [plustek] ># 1 disables the feature< [plustek] >#< [plustek] >#option disableSpeedup 0< [plustek] >< [plustek] >#< [plustek] ># to save/restore coarse calibration data< [plustek] ># (can also be set via frontend)< [plustek] >#option cacheCalData 0< [plustek] >< [plustek] >#< [plustek] ># use alternate calibration routines< [plustek] >#< [plustek] >#option altCalibration 0< [plustek] >< [plustek] >#< [plustek] ># for skipping whole calibration step< [plustek] >#< [plustek] >#option skipCalibration 0< [plustek] >< [plustek] >#< [plustek] ># for skipping entire fine calibration step< [plustek] ># coarse calibration is done< [plustek] >#< [plustek] >#option skipFine 0< [plustek] >< [plustek] >#< [plustek] ># discard the result of the fine white calibration< [plustek] >#< [plustek] >#option skipFineWhite 0< [plustek] >< [plustek] ># for replacing the gain values found during coarse< [plustek] ># calibration< [plustek] ># (can also be set via frontend)< [plustek] >#option red_gain -1< [plustek] >#option green_gain -1< [plustek] >#option blue_gain -1< [plustek] >< [plustek] ># for replacing the offset values found during coarse< [plustek] ># calibration< [plustek] ># (can also be set via frontend)< [plustek] >#option red_offset -1< [plustek] >#option green_offset -1< [plustek] >#option blue_offset -1< [plustek] >< [plustek] >#< [plustek] ># for replacing the default lampoff settings, this< [plustek] ># works only for CIS devices like CanoScan LiDE20< [plustek] ># (can also be set via frontend)< [plustek] >#option red_lampoff -1< [plustek] >#option green_lampoff -1< [plustek] >#option blue_lampoff -1< [plustek] >< [plustek] >#< [plustek] ># for adjusting the default gamma values< [plustek] ># (can also be set via frontend)< [plustek] >#option redGamma 1.0< [plustek] >#option greenGamma 1.0< [plustek] >#option blueGamma 1.0< [plustek] >#option grayGamma 1.0< [plustek] >< [plustek] >#< [plustek] ># to enable TPA (EPSON or UMAX, if autodetection fails)< [plustek] ># 0 means default behaviour as specified in the internal tables< [plustek] ># 1 means enable (needed for UMAX 3450)< [plustek] >#option enableTPA 0< [plustek] >< [plustek] >#< [plustek] ># model override functionality, currently only available for< [plustek] ># Mustek devices, using NSCs' vendor ID: 0x0400 and< [plustek] ># also their product ID: 0x1000 (LM9831) 0x1001 (LM9832)< [plustek] >#< [plustek] ># mov/PID | 0x1000 | 0x1001< [plustek] ># ---------------------------------------< [plustek] ># 0 (default)| BearPaw1200 | BearPaw 2400< [plustek] ># 1 | ignored | BearPaw 1200< [plustek] >#< [plustek] >#option mov 0< [plustek] >< [plustek] >#< [plustek] ># and of course the device-name< [plustek] >#< [plustek] ># device /dev/usb/scanner0< [plustek] ># device auto< [plustek] >< [plustek] >#< [plustek] ># to define a new device, start with a new section:< [plustek] ># [usb]< [plustek] >#< [plustek] attach (libusb:005:003, 0xbfac2d98, (nil)) [plustek] Device configuration: [plustek] device name : >libusb:005:003< [plustek] USB-ID : >0x04A9-0x220E< [plustek] model ovr. : 0 [plustek] warmup : -1s [plustek] lampOff : -1 [plustek] lampOffOnEnd : yes [plustek] cacheCalData : no [plustek] altCalibrate : no [plustek] skipCalibr. : no [plustek] skipFine : no [plustek] skipFineWhite: no [plustek] invertNegs. : no [plustek] dis.Speedup : no [plustek] pos_x : 0 [plustek] pos_y : 0 [plustek] pos_shading_y: -1 [plustek] neg_x : 0 [plustek] neg_y : 0 [plustek] neg_shading_y: -1 [plustek] tpa_x : 0 [plustek] tpa_y : 0 [plustek] tpa_shading_y: -1 [plustek] red gain : -1 [plustek] green gain : -1 [plustek] blue gain : -1 [plustek] red offset : -1 [plustek] green offset : -1 [plustek] blue offset : -1 [plustek] red lampoff : -1 [plustek] green lampoff: -1 [plustek] blue lampoff : -1 [plustek] red Gamma : 1.00 [plustek] green Gamma : 1.00 [plustek] blue Gamma : 1.00 [plustek] gray Gamma : 1.00 [plustek] --------------------- [plustek] usbDev_open(libusb:005:003,0x04A9-0x220E) - 0x9075770 [plustek] sanei_access_lock failed: 11 [plustek] open failed: -1 [dll] init: backend `plustek' is version 1.0.0 [plustek] sane_get_devices (0xbfac4ee8, 0) [dll] sane_get_devices: found 0 devices scanimage: no SANE devices found [dll] sane_exit: exiting [dll] sane_exit: calling backend `plustek's exit function [plustek] sane_exit [dll] sane_exit: finished ---------------------------------------------------------------------------------------------------------------------------------------------------------- Please help Greetings Geert Jan
