Hi Stephan,
On Wednesday 28 September 2005 23:27, Stephan February wrote:
> hello
>
> On Wednesday 28 September 2005 22:23, Gerhard Jaeger wrote:
> > hmmm, I thought my last mail was quite clear!
> > I don't think it's necessary to snoop the USB traffic - it's necessary to
> > find out the correct clock values...
>
> Armed with Gerard's suggestion, I have been playing around with the timings
> and motor speed settings for my Canon LiDE 25.
thanks for that.
> Here is a motor/timing setting which currently works well for me, and without
> the previous annoying grinding noises. It also looks like my problems with
> saned are related to previously reporting "timing" issues when network
> scanning. The latter I've confirmed by doing a saned scan via localhost.
>
> Please comment if you see anything obviously wrong or dangerous here 'cause I
> really just fiddled until I was satisfied.
if it's working, everything is fine ;)
>
> >>>>>>>> snip <<<<<<<<<
>
> { MODEL_CANON1200, 8, 51, 9,
> /* Motor settings (PWM and PWM_Duty) */
> /* <=75dpi <=100dpi <=150dpi <=200dpi <=300dpi */
> {{ 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 },
>
> /* <=400dpi <=600dpi <=800dpi <=1200dpi <=2400dpi */
> { 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }, { 8, 31, 1 }},
> /* Color mode MCLK settings */
> { 9.0, 9.0, 9.0, 9.0, 9.0, 9.0, 9.0, 9.0, 9.0, 9.0 },
> { 9.0, 9.0, 9.0, 9.0, 9.0, 9.0, 9.0, 9.0, 9.0, 9.0 },
> /* Gray mode MCLK settings */
> { 7.0, 7.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0, 6.0 },
> { 6.5, 6.5, 6.0, 6.0, 6.0, 6.0, 8.0, 12.0, 12.0, 12.0 }
> },
just wondering, why the MCLKs are that high - ain't the scans too slow?
> >>>>>>>>> snip <<<<<<
>
> ... and ...
>
> >>>>>>> snip <<<<<<<<
> /** Canon LiDE25 */
> static HWDef Hw0x04A9_0x2220 =
> {
> 0.80, /* dMaxMotorSpeed (Max_Speed) */
> 0.200, /* dMaxMoveSpeed (Max_Speed) */
> 0.0, /* dHighSpeed */
> >>>>>>>> snip <<<<<<<
>
> If I were to create a patch, would it be better if an entirely new section
> for
> the LiDE25 was created e.g.?
>
> .
> .
> { MODEL_LIDE25, 8, 51, 9,
> /* Motor settings (PWM and PWM_Duty) */
I'll do that and submitt it to CVS today...
Thanks again for that work.
Gerhard
