On Tuesday 23 August 2005 16:47, Bertrik Sikken wrote: > This is weird. > You should get the same response when running the scanimage -L command > twice. Perhaps the first time, hotplug had not updated the USB > permissions yet. What kernel are you running?
My kernel is 2.6.12-r6. I tried with some previous kernel as well but same results. Anyway, I continue to have these two output with calls to the scanimage -L, look: ------------------------------- cluca linux # scanimage -L scanimage: hp-option.c:3710: hp_optset_fix_geometry_options: Assertion `tl_x && tl_y && br_x && br_y' failed. Aborted cluca linux # scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). cluca linux # scanimage -L scanimage: hp-option.c:3710: hp_optset_fix_geometry_options: Assertion `tl_x && tl_y && br_x && br_y' failed. Aborted cluca linux # scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). cluca linux # scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). cluca linux # scanimage -L scanimage: hp-option.c:3710: hp_optset_fix_geometry_options: Assertion `tl_x && tl_y && br_x && br_y' failed. Aborted cluca linux # scanimage -L No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). ------------------------------------------ :-) It continue to change. > > Some months ago, I was successfull in setting up sane, but now I'm > > finding difficulties. The scanner is a HP PSC1317. scanimage version is: > > > > cluca linux # scanimage --version > > scanimage (sane-backends) 1.0.15; backend version 1.0.15 > > > > I saw that someone else is having the same error, and found to see the > > output of this command; I can't understand anything but it seems not good > > the second one: > > > > cluca linux # sane-find-scanner -q > > found USB scanner (vendor=0x03f0 [hp], product=0x3f11 [psc 1310 series ]) > > at libusb:002:002 > > cluca linux # ls -l /proc/bus/ubs/002/002 > > ls: /proc/bus/ubs/002/002: No such file or directory > > try /proc/bus/usb not /proc/bus/ubs Ok :-), sorry, this is what I get: cluca linux # sane-find-scanner -q found USB scanner (vendor=0x03f0 [hp], product=0x3f11 [psc 1310 series ]) at libusb:002:003 cluca linux # ls -l /proc/bus/usb/002/003 -rw-rw---- 1 root scanner 147 Aug 24 12:01 /proc/bus/usb/002/003 Is there something else I can try to make it work? Thanks. Luca
