dll.conf appears to come with epson uncommented, along with a whole bunch of other backends.
On Saturday 02 July 2005 12:53 pm, you wrote: > Did you uncomment the entry for the EPSON backend in dll.conf? > > On Jul 2, 2005, at 2:46 PM, g.hin...@verizon.net wrote: > >> I have one sitting next to my computer, and it works... > > > > Are you using the proprietary epson drivers (called iscan-1.14.0-3)? > > Or does it work without those? > > > >> The file /tmp/scan.log will contain information about what the > >> backend is > >> doing. > > > > It seems pretty bare :( > > > > # set | grep SANE > > SANE_DEBUG_EPSON=255 > > > > # scanimage > /tmp/scan.log 2>&1 > > > > #cat /tmp/scan.log > > scanimage: no SANE devices found > > > >> Do you have more than one version of Sane on your system? > > > > I don't think so... > > > > # scanimage -V > > scanimage (sane-backends) 1.0.14; backend version 1.0.14 > > > > # ls -alg /usr/lib64/libsan* > > -rwxr-xr-x 1 root 811 2005-01-10 10:17 /usr/lib64/libsane.la > > lrwxrwxrwx 1 root 17 2005-06-23 00:50 /usr/lib64/libsane.so -> > > libsane.so.1.0.14 > > lrwxrwxrwx 1 root 17 2005-06-23 00:50 /usr/lib64/libsane.so.1 -> > > libsane.so.1.0.14 > > -rwxr-xr-x 1 root 23632 2005-01-10 10:17 /usr/lib64/libsane.so.1.0.14 > > > > On Saturday 02 July 2005 05:13 am, you wrote: > >> I have one sitting next to my computer, and it works... > >> > >> Try to set the debug environment variable before you run scanimage: > >> > >> export SANE_DEBUG_EPSON=255 > >> scanimage > /tmp/scan.log 2>&1 > >> > >> The file /tmp/scan.log will contain information about what the > >> backend is > >> doing. What surprises me is that the scanner is not even recognized. > >> > >> Do you have more than one version of Sane on your system? > >> > >> Karl Heinz > >> > >> On Jul 2, 2005, at 12:54 AM, g.hin...@verizon.net wrote: > >>> Hi, I have an Epson Stylus RX600 (USB connection) and I can't get > >>> sane to > >>> detect it fully. Supposedly this printer is supported with a "good" > >>> rating. > >>> I've spent a lot of time researching this but couldn't solve this > >>> problem! > >>> Please help... > >>> > >>> Here is a bunch of info: > >>> > >>> I'm using slamd64-10.1 (Slackware distribution tailored for > >>> x86_64). I have > >>> package sane-1.0.14-x86_64-1 installed. My kernel is version > >>> 2.6.11.10. > >>> > >>> Because I use x86_64 architecture, I can't get the epson drivers at > >>> http://www.avasys.jp/english/linux_e/dl_spc.html to work for me, as > >>> some > >>> source is available but it depends on proprietary libraries w/o > >>> source. > >>> Therefore, it won't compile. I can try using the binaries but I'm > >>> not sure > >>> how to extract them from rpm, or if I should just install rpm, or > >>> if they > >>> would work even if I extracted them. Also, sane-epson claims that > >>> just about > >>> any epson will work on it, at least at some minimum level of > >>> support. > >>> > >>> Here is the USB device info (from /proc/bus/usb/devices): > >>> : Bus=05 Lev=01 Prnt=01 Port=06 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 > >>> > >>> D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > >>> P: Vendor=04b8 ProdID=0806 Rev= 1.00 > >>> S: Manufacturer=EPSON > >>> S: Product=USB2.0 MFP(Hi-Speed) > >>> S: SerialNumber=L58020407201723330 > >>> C:* #Ifs= 3 Cfg#= 1 Atr=c0 MxPwr= 2mA > >>> I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) > >>> E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > >>> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > >>> I: If#= 1 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp > >>> E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > >>> E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > >>> I: If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb- > >>> storage > >>> E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms > >>> E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms > >>> > >>> sane-find-scanner reports this: > >>> > >>> found USB scanner (vendor=0x04b8 [EPSON], product=0x0806 [USB2.0 > >>> MFP(Hi-Speed)]) at libusb:005:002 > >>> > >>> /dev/usb is very limited: > >>> %ls -alg /dev/usb > >>> total 0 > >>> drwxr-xr-x 2 root 0 2005-07-01 21:44 . > >>> drwxr-xr-x 18 root 0 2005-07-01 21:17 .. > >>> crw-rw---- 1 lp 180, 0 2005-07-01 21:44 lp0 > >>> > >>> I altered /etc/sane.d/epson.conf to have every line commented out > >>> except for a > >>> single line: usb 0x4b8 0x806. This doesn't help. I also tried > >>> futzing with > >>> mknod, /dev/usb/scanner, /dev/usb/scanner0, libusb:005:002, etc.. > >>> with > >>> negative results. > >>> > >>> scanimage -L always fails! > >>> > >>> %scanimage -L > >>> No scanners were identified. If you were expecting something > >>> different, > >>> check that the scanner is plugged in, turned on and detected by the > >>> sane-find-scanner tool (if appropriate). Please read the > >>> documentation > >>> which came with this software (README, FAQ, manpages). > >>> > >>> -- > >>> sane-devel mailing list: sane-devel@lists.alioth.debian.org > >>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel > >>> Unsubscribe: Send mail with subject "unsubscribe your_password" > >>> to sane-devel-requ...@lists.alioth.debian.org > > > > -- > > sane-devel mailing list: sane-devel@lists.alioth.debian.org > > http://lists.alioth.debian.org/mailman/listinfo/sane-devel > > Unsubscribe: Send mail with subject "unsubscribe your_password" > > to sane-devel-requ...@lists.alioth.debian.org
