I have a Samsung SCX-4100 Multifunction Printer / Scanner which seems to be using sane following installation of the scanner using the samsung disks. It is running on Fedora Core3, and I can scan using xsane.
I am trying to configure it to run on the network. The server side (saned) seems to be up and running OK. No problems reported in syslog and I can telnet to it on port 6566 and obtain a connection from local machine (192.168.1.50) and remote machine (192.168.1.100) However I get an error message on the scanimage -L command from the remote machine (which relates to the second last line below) :'( . I have enclosed the output of debug_net from the remote machine in the hope someone can suggest what needs fixed. I hope to get this working on Win XP as well but figure its easier to stick with sane before trying to do sane and TWAIN ;-) Hope someone knows the fix for this... Thanks [polc1410@localhost ~]$ SANE_DEBUG_NET=128 scanimage -L insmod: can't read '/lib/modules/2.6.11-1.27_FC3/kernel/drivers/mfpportctrl/mfpport.ko': No such file or directory insmod: can't read '/lib/modules/2.6.11-1.27_FC3/kernel/drivers/mfpportctrl/mfpportprobe.ko': No such file or directory insmod: can't read '/lib/modules/2.6.11-1.27_FC3/kernel/drivers/mfpportctrl/mfpport.ko': No such file or directory insmod: can't read '/lib/modules/2.6.11-1.27_FC3/kernel/drivers/mfpportctrl/mfpportprobe.ko': No such file or directory [sanei_debug] Setting debug level of net to 128. [net] sane_init: authorize = 0x8049220, version_code = 0xbfff669c [net] sane_init: SANE net backend version 1.0.13 (AF-indep+IPv6) from sane-backends 1.0.15 [net] sane_init: Client has little endian byte order [net] sane_init: searching for config file [net] sane_init: trying to add 192.168.1.50 [net] add_device: adding backend 192.168.1.50 [net] add_device: backend 192.168.1.50 added [net] sane_init: done reading config [net] sane_init: evaluating environment variable SANE_NET_HOSTS [net] sane_init: done [net] sane_get_devices: local_only = 0 [net] connect_dev: trying to connect to 192.168.1.50 [net] connect_dev: [0] connection succeeded (IPv4) [net] connect_dev: sanei_w_init [net] connect_dev: net_init (user=polc1410, local version=1.0.3) [net] connect_dev: freeing init reply (status=Success, remote version=1.0.3) [net] connect_dev: done *[sanei_wire] sanei_w_array: DECODE: maximum amount of allocated memory exceeded (limit: 1048576, new allocation: 3180390528, total: 3181439104 bytes)* [net] sane_get_devices: ignoring rpc-returned status Unknown SANE status code 1768846189 Segmentation fault -- ------------------------------------------------------------------------ *Calum Polwart* ------------------------------------------------------------------------
