try doing exactly what he told you :) SANE_DEBUG_COOLSCAN2=255 scanimage -L
allan On Tue, 17 May 2005, john wrote: > I looked at sg0 & sg1 and all they contain is cdwriter nothing else. And "sane > debug coolscan2=255 scanimage -L" bash says command not found. > > On Tuesday 17 May 2005 02:04 am, you wrote: >>> I hope that it is ok to post this here, if not let me know. I installed >>> ftp://rpmfind.net/linux/Mandrake/10.2/SRPMS/main/sane-1.0.15-7mdk.src.rpm >>> and the dependancies and everything seemed to install properly. When I >>> run the program from either the GUI interface or the command line or >>> sane-find-scanner it fails to find anything. My system is seeing the SCSI >>> interface which the scanner is attached to. Is there something I'm >>> missing. Any help would be greatly appreciated. >> >> Make sure that the user running scanimage/xsane/xscanimage has >> read/write permissions to the scanner's device file >> (/dev/sg*). There's no need to change any configuration files, the >> default must work just fine. >> >> If this fails, please post the output of "SANE_DEBUG_COOLSCAN2=255 >> scanimage -L". >> >> Andras > > -- "so don't tell us it can't be done, putting down what you don't know. money isn't our god, integrity will free our souls" - Max Cavalera
