Hi, > here is the extracts from snapscan.conf that required a twig at > firmware line: > > #------------------------------ General > ----------------------------------- > > # Change to the fully qualified filename of your firmware file, if > # firmware upload is needed by the scanner > #firmware /path/to/your/firmware/file.bin > firmware /dev/usb/scanner0 u96v121.bin
This entry will cause problems. You must give the path to the firmware filename, not the device name. E.g. if you copied your firmware file to /etc/acer/u96v121.bin the entry should read firmware /etc/acer/u96v121.bin > > # If not automatically found you may manually specify a device > name. > > # For USB scanners also specify bus=usb, e.g. > /dev/usb/scanner0 bus=usb You can comment out this entry, your scanner will be found automatically. If you leave it in remove the blank at the beginning of the line. /Oliver
