Hi ,
In my box I have Redhat 9.
I must connect via SCSI Interface Umax Mirage II scanner.
SCSI adapter is Acard AEC-6712TU.
During startup of computer the following communique appears:
ROM Address: C800h
I/O Port : 1000h
IRQ Number : 11(level)
SCANNING SCSI DEVICE
ID= 1 06(scanner) UMAX MIRAGE II v1.4
ID= 7 * Host Adapter
NO HARD DIASK DETECT. ON-BOARD BIOS DISABLE ...
( On the same box on another disk I've intalled Windows 98 and
MgicScan32 V4.3 - scaner function well. )
Linux System logs contain:
Oct 4 19:19:05 localhost kernel: ACARD AEC-671X PCI Ultra/W SCSI-3
Host Adapter: 0 IO:1000, IRQ:11.
Oct 4 19:19:05 localhost kernel: ID: 7 Host Adapter
Oct 4 19:19:05 localhost kernel: scsi0 : ACARD AEC-6710/6712/67160 PCI
Ultra/W/LVD SCSI-3 Adapter Driver V2.6+ac
information.
Driver is atp870u.
My qustion is:
How to install correctly the scanner and the scsi adapter - I must make
any mistake.
I do:
modprobe sg
modprobe atp870u
[root@localhost scsi]# lsmod
Module Size Used by Not tainted
atp870u 23856 0 (unused)
sg 36524 0 (unused)
scsi_mod 107160 2 [atp870u sg]
ide-cd 35676 0 (autoclean)
cdrom 33728 0 (autoclean) [ide-cd]
parport_pc 19076 1 (autoclean)
lp 8996 0 (autoclean)
parport 37056 1 (autoclean) [parport_pc lp]
autofs 13268 0 (autoclean) (unused)
8139too 18120 1
mii 3976 0 [8139too]
keybdev 2976 0 (unused)
mousedev 5492 1
hid 22148 0 (unused)
input 5888 0 [keybdev mousedev hid]
usb-uhci 26348 0 (unused)
usbcore 78816 1 [hid usb-uhci]
ext3 70784 2
jbd 51892 2 [ext3]
[root@localhost root]# ls /proc/scsi
atp870u scsi
[root@localhost scsi]# more scsi
Attached devices: none
I think it should be also sg directory in /proc/scsi
[root@localhost root]# sane-find-scanner
# No SCSI scanners found. If you expected something different, make sure
that
# you have loaded a SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
Can anyone help me ?
Jurek
