> > >> Hi >> >>> I would like to use scanimage with my epson 4180. >>> It is supported by epkowa backend, and iscan works. But I would like >>> to do some scans on command line, without any gui, is it possible? >>> >> > Some more informations:
I Have juste tried this fjord:/var/log# SANE_DEBUG_EPKOWA=255 scanimage -L [sanei_debug] Setting debug level of epkowa to 255. [epkowa] sane_init: iscan 1.13.0 [epkowa] sane_init, ># epkowa.conf< [epkowa] sane_init, >#< [epkowa] sane_init, ># examples for how to configure the SANE EPSON KOWA Backend< [epkowa] sane_init, >#< [epkowa] sane_init, ># SCSI scanner:< [epkowa] sane_init, >#scsi EPSON< [epkowa] sane_init, >#< [epkowa] sane_init, ># Parallel port scanner:< [epkowa] sane_init, >#pio 0x278< [epkowa] sane_init, >#pio 0x378< [epkowa] sane_init, >#pio 0x3BC< [epkowa] sane_init, >#< [epkowa] sane_init, ># USB scanner - only enable this if you have an EPSON scanner. It could< [epkowa] sane_init, ># otherwise block your non-EPSON scanner from being< [epkowa] sane_init, ># recognized.< [epkowa] sane_init, >#usb /dev/usb/scanner0< [epkowa] sane_init, >#usb 0x04b8 0x0118a< [epkowa] sane_init, >#usb /proc/bus/usb/004/005< [epkowa] sane_init, >usb libusb:004:005< [epkowa] attach_one_usb(libusb:004:005) [epkowa] SANE EPSON KOWA Backend 1.13.0 - 2004-10-05 [epkowa] attach(libusb:004:005, 3) [epkowa] attach: opening libusb:004:005 [epkowa] Found valid EPSON scanner: 0x4b8/0x118 (vendorID/productID) [epkowa] /usr/lib/libesint43.so: undefined symbol: __gxx_personality_v0 [epkowa] sane_get_devices() No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). /usr/lib/libesint43.so: undefined symbol: __gxx_personality_v0 May this line explain why I can not use scanimage -depkowa:libusb:004:005 or xscanimage? Thanks for help Mike
