Am Do, den 22.04.2004 schrieb Henning Meier-Geinitz um 20:51: > Hi, > > On Wed, Apr 21, 2004 at 05:22:40PM +0200, Flynn Marquardt wrote: > > we are using scanadf for a long time now for sending fax in resolution > > 100 or 200 dpi. Using it at 300 dpi gives an IO error after the first or > > second page: > > > > scanadf: sane_read: Error during device I/O > > Error during device I/O > > I don't thin it's a problem of scanadf. > I agree too now.
> > Scanning in 100 or 200 dpi we scan more then 10 pages without any > > problems. Scanning at 300 dpi after each scanned page scanadf pauses for > > a while and it continues scanning or it gives the error message above. > > Maybe a timeout problem. > > > > Used setup: > > > > - Scanner HP MFC 3320 (device hpoj:mlc:usb:HP_LaserJet_3300_3310_3320) > > connected over USB cable > > - sane version 1.0 12, sane-backend 1.0.13 (current debian unstable) > > Try other frontends. Both xsane and scanimage are able to use ADFs, at > least that works with the ADF scanners I use. If it happens with those > programs, too, it's most probably a problem with the hpoj backend. > Contact the hpoj people in this case. > with scanimage I have the same problems. I'll write to the hpoj people. Flynn
