Hi! Any ideas if/how to get this scanner working w/ FreeBSD?
man uscanner(4) says it is supported, but there is noting about it on the sane site. Kernel says: uscanner0: PRIMAX Colorado USB 19200, rev 1.00/1.01, addr 2 when connecting it. Correct. sane-find-scanner says: # No SCSI scanners found. If you expected something different, make sure that # you have loaded a SCSI driver for your SCSI adapter. found USB scanner (vendor=0x0461, product=0x0360) at /dev/uscanner0 # Your USB scanner was detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. # Not checking for parallel port scanners. # Most Scanners connected to the parallel port or other proprietary ports # can't be detected by this program. and scanimage -L says No scanners were identified. If you were expecting something different, check that the scanner is plugged in, turned on and detected by the sane-find-scanner tool (if appropriate). Please read the documentation which came with this software (README, FAQ, manpages). Note: when running sane-find-scanner as non-root, it does not find anything. I assume I need libusb for that? I use FreeBSD current, pretty recent. Thanks, Palle
