I have a G3 450Mhz running Panther.3.2 on OEM video card. 256M RAM PCI USB 2 port and PCI FW 2 port cards. Only the Epson 636U scanner is plugged in. I powered the scanner on first, then plugged into the port.
There are no other apps running that scan, nor do I have any other apps that scan. No daemons that I'm aware of. Classic isn't running. I use to run it only to scan with Omnipage Pro X, before I updated to Panther. But it has not been run since. Here's what I've tried. Thanks, Fritz sane-find-scanner found USB scanner (vendor=0x04b8 [EPSON], product=0x0101 [Perfection636]) at libusb:001:002-04b8-0101-ff-ff # Your USB scanner was (probably) detected. It may or may not be supported by # SANE. Try scanimage -L and read the backend's manpage. scanimage > test.pnm scanimage: no SANE devices found scanimage -L No scanners were identified. scanimage -d test:0 > test.pnm put a file "test.pnm" in my documents folder. I ran the back-end debugger setenv SANE_DEBUG_EPSON 255; setenv SANE_DEBUG_SANEI_USB 255; scanimage > test.pnm [sanei_debug] Setting debug level of sanei_usb to 255. usb_set_debug: Setting debugging level to 255 (on) usb_os_find_busses: Found 001 usb_os_find_devices: Found USB device at location 0x0f000000 usb_os_find_devices: Found 001-05ac-8005-09-00 on 001 at location 0x0f000000 usb_os_find_devices: Found USB device at location 0x0f200000 usb_os_find_devices: Found 002-04b8-0101-ff-ff on 001 at location 0x0f200000 usb_os_open: 04b8:0101 usb_os_open(USBDeviceOpenSeize): another process has device opened for exclusive access usb_control_msg: 128 6 512 0 0xbfffed48 8 1000 usb_control_msg: 128 6 512 0 0x301fa0 32 1000 usb_os_close: 04b8:0101 usb_os_open: 05ac:8005 usb_os_open(USBDeviceOpenSeize): another process has device opened for exclusive access usb_control_msg: 128 6 512 0 0xbfffed48 8 1000 usb_control_msg: 128 6 512 0 0x301c70 27 1000 usb_os_close: 05ac:8005 [sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't look like a scanner (9/9) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces [sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101) interface 0 at libusb:001:002-04b8-0101-ff-ff [sanei_usb] sanei_usb_init: found 1 devices [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0010 [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0030 [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0130 [sanei_debug] Setting debug level of sanei_usb to 255. usb_set_debug: Setting debugging level to 255 (on) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't look like a scanner (9/9) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces [sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101) interface 0 at libusb:001:002-04b8-0101-ff-ff [sanei_usb] sanei_usb_init: found 1 devices [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0230 [sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner' [sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner' in list [sanei_debug] Setting debug level of sanei_usb to 255. usb_set_debug: Setting debugging level to 255 (on) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't look like a scanner (9/9) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces [sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101) interface 0 at libusb:001:002-04b8-0101-ff-ff [sanei_usb] sanei_usb_init: found 1 devices [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0001 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2004 [sanei_debug] Setting debug level of sanei_usb to 255. usb_set_debug: Setting debugging level to 255 (on) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't look like a scanner (9/9) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces [sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101) interface 0 at libusb:001:002-04b8-0101-ff-ff [sanei_usb] sanei_usb_init: found 1 devices [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x1a20 [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x1a26 [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x2022 [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x1a2a [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x2040 [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x2060 [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x207e [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20be [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20c0 [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20b0 [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20de [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20fc [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20fe [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x0002 [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x0001 [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2061 [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2093 [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2091 [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2095 [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2097 [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x208d [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x20ff [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x208f [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x20fd [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0114 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011f usb_os_find_busses: Found 001 usb_os_find_devices: Found USB device at location 0x0f000000 usb_os_find_devices: Found 001-05ac-8005-09-00 on 001 at location 0x0f000000 usb_os_find_devices: Found USB device at location 0x0f200000 usb_os_find_devices: Found 002-04b8-0101-ff-ff on 001 at location 0x0f200000 [sanei_debug] Setting debug level of sanei_usb to 255. usb_set_debug: Setting debugging level to 255 (on) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't look like a scanner (9/9) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces [sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101) interface 0 at libusb:001:002-04b8-0101-ff-ff [sanei_usb] sanei_usb_init: found 1 devices [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0010 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0011 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0015 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0013 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0013 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0011 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0010 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0015 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0016 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0007 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x000f [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x000f [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0005 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0012 [sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1000 [sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1001 [sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1001 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2007 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2008 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2009 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2013 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2015 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2016 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0505 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0605 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010f [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011d [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0060 [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0160 [sanei_usb] sanei_usb_find_devices: vendor=0x049f, product=0x001a [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2206 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2207 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2208 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x220d [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x220e [sanei_debug] Setting debug level of sanei_usb to 255. usb_set_debug: Setting debugging level to 255 (on) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't look like a scanner (9/9) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces [sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101) interface 0 at libusb:001:002-04b8-0101-ff-ff [sanei_usb] sanei_usb_init: found 1 devices [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0006 [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0001 [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0008 [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0002 [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0873 [sanei_debug] Setting debug level of sanei_usb to 255. usb_set_debug: Setting debugging level to 255 (on) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't look like a scanner (9/9) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces [sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101) interface 0 at libusb:001:002-04b8-0101-ff-ff [sanei_usb] sanei_usb_init: found 1 devices [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0010 [sanei_debug] Setting debug level of sanei_usb to 255. usb_set_debug: Setting debugging level to 255 (on) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't look like a scanner (9/9) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces [sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101) interface 0 at libusb:001:002-04b8-0101-ff-ff [sanei_usb] sanei_usb_init: found 1 devices [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x1005 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x1105 [sanei_debug] Setting debug level of sanei_usb to 255. usb_set_debug: Setting debugging level to 255 (on) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't look like a scanner (9/9) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces [sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101) interface 0 at libusb:001:002-04b8-0101-ff-ff [sanei_usb] sanei_usb_init: found 1 devices [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0101 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0401 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0201 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0601 [sanei_debug] Setting debug level of sanei_usb to 255. usb_set_debug: Setting debugging level to 255 (on) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't look like a scanner (9/9) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces [sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101) interface 0 at libusb:001:002-04b8-0101-ff-ff [sanei_usb] sanei_usb_init: found 1 devices [sanei_usb] sanei_usb_find_devices: vendor=0x05d8, product=0x4002 [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021e [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0218 [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0219 [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021a [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021d [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021c [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0210 [sanei_usb] sanei_usb_find_devices: vendor=0x043d, product=0x002d [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0401 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0400 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0402 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0403 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0413 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0422 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2011 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x201b [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2017 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x201a [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x201f [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2014 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0444 [sanei_debug] Setting debug level of sanei_usb to 255. usb_set_debug: Setting debugging level to 255 (on) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't look like a scanner (9/9) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces [sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101) interface 0 at libusb:001:002-04b8-0101-ff-ff [sanei_usb] sanei_usb_init: found 1 devices [sanei_debug] Setting debug level of epson to 255. [epson] sane_init: sane-backends 1.0.14 [sanei_debug] Setting debug level of sanei_usb to 255. usb_set_debug: Setting debugging level to 255 (on) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005, interface 0 doesn't look like a scanner (9/9) [sanei_usb] sanei_usb_init: device 0x05ac/0x8005: no suitable interfaces [sanei_usb] sanei_usb_init: found libusb device (0x04b8/0x0101) interface 0 at libusb:001:002-04b8-0101-ff-ff [sanei_usb] sanei_usb_init: found 1 devices [epson] sane_init, ># epson.conf< [epson] sane_init, >#< there was more to this response, but it looked like instructions that I didn't understand, not response to the Terminal command. Thanks,
