Sees that almost everything works now using avision backend. I can set
brightness, contrast, scan color, gray scale, batch mode, and I didn't have
the double-page feed problem that I initially had with the sp15c.
Only thing, it seems to be stuck on using the ADF, even if I use 'scanimage
--source Flatbed ...'. Also trying XSane with "Flatbed" selected I get the
error "Document Feeder out of Documents".
Garrick
>Date: Thu, 25 Mar 2004 16:07:20 -0500 (EST)
>
>ahh, now that i look at the avision backend, i see that it only mentions
>scanpartner units up thru the 600, but not the 620.
>
>you could try adding a new block for the 620c down near line 900 of
>avision.c and recompile. just copy the 600 block.
>
>if that does not work, you might try setting the 0 at the end of the block
>to AV_FUJITSU (like the 15c is a few lines above)
>
>i have only done a cursory glance at this code, so it may not work, but
>its is worth a try :)
>
>allan
>
>On Thu, 25 Mar 2004, Garrick Sitongia wrote:
>
> > I modified my /usr/local/etc/sane.d/dll.conf file.
> > The avision.conf already has the line 'scsi FCPA'
> >
> > The 'scanimage -L'
> >
> > No scanners were identified. If you were expecting something different,
> > [...]
> >
> > BTW the features I need are both the Flatbed and ADF functionality, and
>the
> > resolutions 150, 240 and 300 dpi.
> >
> > Garrick
> >
> > >Date: Thu, 25 Mar 2004 14:06:46 -0500 (EST)
> > >
> > >put a # in front of the sp15c line in /etc/sane.d/dll.conf to stop
>loading
> > >it. make sure the avision line does not have a #
> > >
> > >try scanimage -L to see if the avision backend sees the scanner. if
>not,
> > >it may need a line in avision.conf that says 'scsi FCPA'
> > >
> > >allan
> > >
> > >On Thu, 25 Mar 2004, Garrick Sitongia wrote:
> > >
> > > > When I run scanimage, sane chooses the backend to use based on
> > >autodetection
> > > > result. How do I direct it to using the avision backend?
> > > >
> > > > Garrick
> > > >
> > > > >Date: Thu, 25 Mar 2004 11:17:06 -0500 (EST)
> > > > >
> > > > >
> > > > >another option might be to try the avision backend instead. it does
>not
> > > > >support all of the fetures of the sp15/300/600, but it may have
>better
> > > > >support for the features you need.
> > > > >
> > > > >allan
> > > > >
> > > > >On Thu, 25 Mar 2004, Garrick Sitongia wrote:
> > > > >
> > > > > > The brightness and contrast levels are presently not supported
>by
> > >the
> > > > >sp15c
> > > > > > backend. These are presently hardcoded at 128. But I was able to
>get
> > >it
> > > > > > working in the hardware by adding "scanf" statements in sp15c.c.
> > > > >Scanimage
> > > > > > stops and I can enter numbers for brightness and contrast each
>time
> > >I
> > > > >run
> > > > > > scanimage.
> > > > > >
> > > > > > scanf("%d", &c); /* my code */
> > > > > > dev->brightness = c;
> > > > > > dev->threshold = 128;
> > > > > > scanf("%d", &c); /* my code */
> > > > > > dev->contrast = c;
> > > > > >
> > > > > > How instead do I pass these numbers to the backend from
>scanimage?
> > >Where
> > > > > > scanimage would get them the usual way from command line args?
> > > > > >
> > > > > > Garrick
> > > > > >
> > > > > >
>_________________________________________________________________
> > > > > > FREE pop-up blocking with the new MSN Toolbar get it now!
> > > > > > http://toolbar.msn.com/go/onm00200415ave/direct/01/
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >--
> > > > >"so don't tell us it can't be done, putting down what you don't
>know.
> > > > >money isn't our god, integrity will free our souls" - Max Cavalera
> > > > >
> > > > >
> > > > >--
> > > > >sane-devel mailing list: sane-devel@lists.alioth.debian.org
> > > > >http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> > > > >Unsubscribe: Send mail with subject "unsubscribe your_password"
> > > > > to sane-devel-requ...@lists.alioth.debian.org
> > > >
> > > > _________________________________________________________________
> > > > MSN Toolbar provides one-click access to Hotmail from any Web page
> > >FREE
> > > > download! http://toolbar.msn.com/go/onm00200413ave/direct/01/
> > > >
> > > >
> > >
> > >--
> > >"so don't tell us it can't be done, putting down what you don't know.
> > >money isn't our god, integrity will free our souls" - Max Cavalera
> > >
> > >
> > >--
> > >sane-devel mailing list: sane-devel@lists.alioth.debian.org
> > >http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> > >Unsubscribe: Send mail with subject "unsubscribe your_password"
> > > to sane-devel-requ...@lists.alioth.debian.org
> >
> > _________________________________________________________________
> > Free up your inbox with MSN Hotmail Extra Storage. Multiple plans
>available.
> >
>http://join.msn.com/?pgmarket=en-us&page=hotmail/es2&ST=1/go/onm00200362ave/direct/01/
> >
> >
>
>--
>"so don't tell us it can't be done, putting down what you don't know.
>money isn't our god, integrity will free our souls" - Max Cavalera
>
_________________________________________________________________
Check out MSN PC Safety & Security to help ensure your PC is protected and
safe. http://specials.msn.com/msn/security.asp
