On 09/04/04 18:38:14, Frank DiPrete wrote:
Hello - I have sane-backends running, compiled with libieee1284 and trying to use a canon fb620p scanner without any success. FreeBSD 5.2.1 running sane-backends 1.0.12 Here's the output of scanimage in debug mode: thurston# scanimage [sanei_debug] Setting debug level of canon_pp to 100. [canon_pp] >> sane_init(0xbfbfe69c, 0x80491d0): Canon Parallel SANE Backend $Revision: 1.10 $ [canon_pp] sane_init: >> ieee1284_find_ports [canon_pp] sane_init: 0 << ieee1284_find_ports [canon_pp] sane_init: 3 parallel port(s) found. [canon_pp] sane_init: port 0x278 [canon_pp] >> init_device [canon_pp] init_device: [configuring options] [canon_pp] init_device: configuring opt: num_options [canon_pp] init_device: configuring opt: resolution [canon_pp] init_device: configuring opt: colour mode [canon_pp] init_device: configuring opt: bit depth [canon_pp] init_device: configuring opt: tl-x [canon_pp] init_device: configuring opt: tl-y [canon_pp] init_device: configuring opt: br-x [canon_pp] init_device: configuring opt: br-y [canon_pp] init_device: configuring opt: calibrate [canon_pp] init_device: done opts [canon_pp] << init_device [canon_pp] sane_init: port 0x378 [canon_pp] >> init_device [canon_pp] init_device: [configuring options] [canon_pp] init_device: configuring opt: num_options [canon_pp] init_device: configuring opt: resolution [canon_pp] init_device: configuring opt: colour mode [canon_pp] init_device: configuring opt: bit depth [canon_pp] init_device: configuring opt: tl-x [canon_pp] init_device: configuring opt: tl-y [canon_pp] init_device: configuring opt: br-x [canon_pp] init_device: configuring opt: br-y [canon_pp] init_device: configuring opt: calibrate [canon_pp] init_device: done opts [canon_pp] << init_device [canon_pp] sane_init: port 0x3bc [canon_pp] >> init_device [canon_pp] init_device: [configuring options] [canon_pp] init_device: configuring opt: num_options [canon_pp] init_device: configuring opt: resolution [canon_pp] init_device: configuring opt: colour mode [canon_pp] init_device: configuring opt: bit depth [canon_pp] init_device: configuring opt: tl-x [canon_pp] init_device: configuring opt: tl-y [canon_pp] init_device: configuring opt: br-x [canon_pp] init_device: configuring opt: br-y [canon_pp] init_device: configuring opt: calibrate [canon_pp] init_device: done opts [canon_pp] << init_device [canon_pp] sane_init: ># Define which port to use if one isn't specified - you should only have< [canon_pp] sane_init: ># one of these lines!< [canon_pp] sane_init: ># This is the default port to be used - others will be detected< [canon_pp] sane_init: >ieee1284 lpt0< [canon_pp] sane_init: Successfully parsed default scanner. [canon_pp] sane_init: >< [canon_pp] sane_init: >< [canon_pp] sane_init: ># Define the location of our pixel weight file, can begin with ~/ if needed.< [canon_pp] sane_init: ># You can have as many of these as you like - lines with ports that don't exist< [canon_pp] sane_init: >< [canon_pp] sane_init: ># will be ignored.< [canon_pp] sane_init: >#< [canon_pp] sane_init: ># Parameters are:< [canon_pp] sane_init: ># calibrate /path/to/calibration-file port-name< [canon_pp] sane_init: >#< [canon_pp] sane_init: ># The format of port-name is dependant on your OS version.< [canon_pp] sane_init: >#< [canon_pp] sane_init: ># If a file isn't speficied, the default name will be< [canon_pp] sane_init: ># ~/.sane/canon_pp-calibration-[port-name]< [canon_pp] sane_init: >< [canon_pp] sane_init: >calibrate ~/.sane/canon_pp-calibration-pp0 lpt0< [canon_pp] sane_init: calibrate line, calibrate ~/.sane/canon_pp- calibration-pp0 lpt0 [canon_pp] sane_init: calibrate line is for unknown port! [canon_pp] sane_init: >< [canon_pp] sane_init: ># calibrate /etc/sane/my_calibration parport1< [canon_pp] sane_init: >< [canon_pp] sane_init: >< [canon_pp] sane_init: ># Enable the next line if you're having trouble with ECP mode such as I/O< [canon_pp] sane_init: ># errors. Nibble mode is slower, but more reliable.< [canon_pp] sane_init: >< [canon_pp] sane_init: >force_nibble< [canon_pp] sane_init: force_nibble requested. [canon_pp] sane_init: >< [canon_pp] sane_init: ># Set a default initialisation mode for each port. Valid modes are:< [canon_pp] sane_init: ># AUTO (attempts to automatically detect by trying both methods)< [canon_pp] sane_init: ># FB620P (10101010 style.. also works for FB320P)< [canon_pp] sane_init: ># FB630P (11001100 style.. also works for FB330P, N340P, N640P)< [canon_pp] sane_init: >< [canon_pp] sane_init: >#init_mode AUTO parport0< [canon_pp] sane_init: >init_mode FB620P lpt0< [canon_pp] sane_init: init_mode line is for unknown port! [canon_pp] sane_init: ># init_mode FB630P parport0< [canon_pp] detect_mode: Opening port 0x3bc [canon_pp] detect_mode: Claiming port. [canon_pp] detect_mode: Port supports ECP-S. [canon_pp] detect_mode: Using ECP-S Mode [canon_pp] detect_mode: Nibble mode force in effect. [canon_pp] sane_init: >> initialise [canon_pp] Scanner not ready (0xf). Attempting to reset... [canon_pp] Timeout: Reset 2 response 1 (0x07 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 2 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 2 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 2 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 2 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Reply 2 (0x0c in 0x1f) - Status = 0x0f [canon_pp] initialise: could not wake scanner [canon_pp] sane_init: << 1 initialise [canon_pp] sane_init: Couldn't contact scanner on port 0x3bc. Probably no scanner there? [canon_pp] detect_mode: Opening port 0x378 [canon_pp] detect_mode: Claiming port. [canon_pp] detect_mode: Port supports ECP-S. [canon_pp] detect_mode: Using ECP-S Mode [canon_pp] detect_mode: Nibble mode force in effect. [canon_pp] sane_init: >> initialise [canon_pp] Scanner not ready (0xf). Attempting to reset... [canon_pp] Timeout: Reset 2 response 1 (0x07 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 2 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 2 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 2 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 2 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Reply 2 (0x0c in 0x1f) - Status = 0x0f [canon_pp] initialise: could not wake scanner [canon_pp] sane_init: << 1 initialise [canon_pp] sane_init: Couldn't contact scanner on port 0x378. Probably no scanner there? [canon_pp] detect_mode: Opening port 0x278 [canon_pp] detect_mode: Claiming port. [canon_pp] detect_mode: Port supports ECP-S. [canon_pp] detect_mode: Using ECP-S Mode [canon_pp] detect_mode: Nibble mode force in effect. [canon_pp] sane_init: >> initialise [canon_pp] Scanner not ready (0xf). Attempting to reset... [canon_pp] Timeout: Reset 2 response 1 (0x07 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 2 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 2 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 2 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 2 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Scanner wakeup reply 1 (0x03 in 0x1f) - Status = 0x0f [canon_pp] Timeout: Reply 2 (0x0c in 0x1f) - Status = 0x0f [canon_pp] initialise: could not wake scanner [canon_pp] sane_init: << 1 initialise [canon_pp] sane_init: Couldn't contact scanner on port 0x278. Probably no scanner there? [canon_pp] << sane_init [canon_pp] >> sane_get_devices (0xbfbfe6d8, 0) [canon_pp] << sane_get_devices scanimage: no SANE devices found [canon_pp] >> sane_exit [canon_pp] << sane_exit -- sane-standard mailing list: sane-stand...@lists.alioth.debian.org http://lists.alioth.debian.org/mailman/listinfo/sane-standard Unsubscribe: Send mail with subject "unsubscribe your_password" to sane-standard-requ...@lists.alioth.debian.org
