Disable qualtiy calibration Oliver
On Monday 28 July 2003 20:16, Matthew wrote: > This is an extension of the thread from 17 Jun 2003 regarding the > problems with the UMAX Astra 2200 series scanner connected via USB. > This is a repost due to my inability to send from the correct e-mail > address. :-) > > http://www.mostang.com/pipermail/sane-devel/2003-June/019106.html > > I'm having the same problem, as described below: > > From xsane I can "Preview" an image, but when I try to "Scan" an image > the interface locks up and I start to see the following in the syslog: > > Jul 28 10:39:45 scan4 kernel: usb_control/bulk_msg: timeout > Jul 28 10:40:25 scan4 last message repeated 2 times > Jul 28 10:41:25 scan4 last message repeated 3 times > > Followed later by: > > Jul 28 10:48:43 scan4 kernel: scanner.c: read_scanner(0): excessive > NAK's received > > I then have to unload usb-ohci.o and scanner.o before trying again. > incidently, xscanimage locks up immediately. > > I've tried several combinations of kernel/sane. > > Redhat kernel 2.4.20 > Stock Linus kernel 2.4.21 > Stock Linus 2.4.21 + 2.4.22-pre6 > > Stock Redhat sane 1.0.9-5 > Rawhide sane 1.0.12-4 > sane cvs snapshot from Jul 27th (after thouroughly removing the prev ve= rs). > > All of the combos above yield the same result. > > The scanner that I'm using is described as such from `lsusb`: > idVendor 0x1606 Umax [hex] > idProduct 0x0230 Astra 2200/2200SU > > Like I said, the "Preview" works but the "Scan" does not. It doesn't > matter whether or not I've already done a "Preview". > > If you need further information, or need access to the machine just let > me know. In any case it seems that others are having the same problem > so the Supported Scanner matrix should probably be updated to show > something other than "stable" since I used that to guide my purchase. > > Let me know if I can be of further assistance. > > Matthew > > > _______________________________________________ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel --=20 http://www.xsane.org http://www.mostang.com/sane http://www.rauch-domain.de mailto:oliver.ra...@rauch-domain.de
