Hi, On Wed, Jul 02, 2003 at 11:35:32PM +0100, Martin wrote: > Background info: > *. Custom UltraSPARC IIi based machine running Debian 3.0
Updated SANE packages for Woody are here: http://people.debian.org/~aurel32/sane.html > *. SCSI bus and cable definately works > *. Scanner worked last time it was used (a little while back) and can be > made to play music in test mode. It worked with the same configuration (sane version etc.)? > Host: scsi1 Channel: 00 Id: 01 Lun: 00 > Vendor: HP Model: C5110A Rev: 3701 > Type: Processor ANSI SCSI revision: 02 Looks ok for me. Nothing else in this file? > [martin@raphael martin]$ cat /etc/sane.d/hp.conf > scsi HP > /dev/scanner Should be ok, too. You could also add /dev/sg?, but that shouldn't be necessary. With ? beeing the correct number for the sg device of your scanner. > raphael:/u/martin# scanimage --device-name=hp:/dev/sgc > scanimage: open of device hp:/dev/sgc failed: Invalid argument > raphael:/u/martin# scanimage --device-name=hp:/dev/sg2 > scanimage: open of device hp:/dev/sg2 failed: Invalid argument > raphael:/u/martin# scanimage -L > > No scanners were identified. If you were expecting something different, > sane-find-scanner: searching for SCSI scanners: > sane-find-scanner: checking /dev/scanner... open ok > sane-find-scanner: found SCSI disk " " at device /dev/scanner You have linked a disk to /dev/scanner, not the scanner. At least that's what sane-find-scanner thinks. > sane-find-scanner: checking /dev/sg0... open ok > sane-find-scanner: found SCSI disk " " at device /dev/sg0 > sane-find-scanner: checking /dev/sg1... open ok > sane-find-scanner: found SCSI disk " " at device /dev/sg1 > sane-find-scanner: checking /dev/sg2... open ok > sane-find-scanner: found SCSI disk " " at device /dev/sg2 > <snip> Same here. On which sg device is the scanner ("processor") found? For me, that looks like a problem with the SCSI subsystem. > Can anyone suggest where I might be able to find more info or what I > might be doing wrong? SANE thinks you are trying to scan from a SCSI disk. Can you show us the complete output of /proc/scsi/scsi and "sane-find-scanner -v -v"? Bye, Henning
