Well Its a success at last I tried without smp amd preemting complied but it was no success, then as you suggeste I looked in var/log/messages. and it seemed to suggest that it was looking for a module usbcore. I recompiled the kernel with a the option for 'support for usb' chosen to be compiled as a module. The scanner now works. I used xsane and all went well. I also change a line in fstab but I don't think this made a difference.
When I get time I will try recompiling the kernel with 'preemptible kernel', I don't think I need smp. I would appeciate it if you take a look at my fstab and var/log/message files below I guess I don't need to set permission in epson_scanner if I set it in fstab globally. Another question where do I go to set up libusb and epson printer, it works if i modprobe usblp and then set it up in Yast? fstab /dev/hdc1 / ext2 defaults 1 1 /dev/hdc2 /home ext2 defaults 1 2 /dev/hdc3 swap swap pri=42 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0 proc /proc proc defaults 0 0 none /proc/bus/usb usbfs devmode=0666 0 0 usbfs /proc/bus/usb usbfs defautls,noauto 0 0 /dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0 /dev/dvd /media/dvd auto ro,noauto,user,exec 0 0 /dev/fd0 /media/floppy auto noauto,user,sync 0 0 /dev/sr0 /media/sr0 auto ro,noauto,user,exec 0 0 /dev/sda1 /media/sda1 auto sync,noauto,user,exec 0 0 /var/log/messages Jan 18 16:35:33 desktop syslogd 1.4.1: restart. Jan 18 16:35:35 desktop /sbin/hotplug[692]: no runnable /etc/hotplug/ usb_host.agent is installed Jan 18 16:35:35 desktop /etc/hotplug/usb.rc[681]: loaded HCD: ehci-hcd Jan 18 16:35:35 desktop /etc/hotplug/usb.rc[681]: loaded HCD: ohci-hcd Jan 18 16:35:35 desktop /sbin/hotplug[733]: no runnable /etc/hotplug/ usb_host.agent is installed Jan 18 16:35:35 desktop /sbin/hotplug[772]: no runnable /etc/hotplug/ usb_host.agent is installed Jan 18 16:35:35 desktop /sbin/hotplug[811]: no runnable /etc/hotplug/ usb_host.agent is installed Jan 18 16:35:35 desktop /etc/hotplug/usb.rc[681]: loaded HCD: uhci-hcd Jan 18 16:35:35 desktop /etc/hotplug/usb.rc[681]: loaded HCD: ehci-hcd Jan 18 16:35:35 desktop /etc/hotplug/usb.rc[681]: FATAL: Module mousedev not found. Jan 18 16:35:35 desktop /etc/hotplug/usb.rc[681]: FATAL: Module keybdev not found. Jan 18 16:35:35 desktop /etc/hotplug/usb.rc[681]: FATAL: Module printer not found. Jan 18 16:35:38 desktop /etc/hotplug/usb.agent[895]: Bad USB agent invocation Jan 18 16:35:38 desktop kernel: klogd 1.4.1, log source = /proc/kmsg started. Jan 18 16:35:38 desktop kernel: Inspecting /boot/System.map-2.6.1-rc1 Jan 18 16:35:38 desktop kernel: Loaded 24789 symbols from /boot/ System.map-2.6.1-rc1. Jan 18 16:35:38 desktop kernel: Symbols match kernel version 2.6.1. Jan 18 16:35:38 desktop kernel: No module symbols loaded - kernel modules not enabled. Jan 18 16:35:38 desktop kernel: eth0: link down Jan 18 16:35:38 desktop kernel: NET: Registered protocol family 17 Jan 18 16:35:38 desktop kernel: raw1394: /dev/raw1394 device initialized Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: registered new driver usbfs Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: registered new driver hub Jan 18 16:35:38 desktop kernel: ehci_hcd: block sizes: qh 128 qtd 96 itd 128 sitd 64 Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: EHCI Host Controller Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: reset hcs_params 0x3206 dbg=0 cc=3 pcc=2 ordered !ppc ports=6 Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: reset hcc_params 6872 thresh 7 uframes 256/512/1024 Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: capability 0001 at 68 Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: irq 21, pci mem e089d000 Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: init command 010009 (park)=0 ithresh=1 period=256 RUN Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13 Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: root hub device address 1 Jan 18 16:35:38 desktop kernel: usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 Jan 18 16:35:38 desktop kernel: drivers/usb/core/message.c: USB device number 1 default language ID 0x409 Jan 18 16:35:38 desktop kernel: usb usb1: Product: EHCI Host Controller Jan 18 16:35:38 desktop kernel: usb usb1: Manufacturer: Linux 2.6.1-rc1 ehci_hcd Jan 18 16:35:38 desktop kernel: usb usb1: SerialNumber: 0000:00:10.3 Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:35:38 desktop kernel: usb usb1: registering 1-0:1.0 (config #1, interface 0) Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: usb_probe_interface Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: usb_probe_interface - got id Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: USB hub found Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: 6 ports detected Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: standalone hub Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: ganged power switching Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: individual port over-current protection Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: Single TT Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: TT requires at most 8 FS bit times Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: Port indicators are not supported Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: power on to power good time: 0ms Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: hub controller current requirement: 0mA Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: local power source is good Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: no over-current condition exists Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: enabling power on all ports Jan 18 16:35:38 desktop kernel: ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) Jan 18 16:35:38 desktop kernel: ohci_hcd: block sizes: ed 64 td 64 Jan 18 16:35:38 desktop kernel: drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.0: irq 21, io base 0000d400 Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 Jan 18 16:35:38 desktop kernel: drivers/usb/host/uhci-hcd.c: detected 2 ports Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.0: root hub device address 1 Jan 18 16:35:38 desktop kernel: usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 Jan 18 16:35:38 desktop kernel: drivers/usb/core/message.c: USB device number 1 default language ID 0x409 Jan 18 16:35:38 desktop kernel: usb usb2: Product: UHCI Host Controller Jan 18 16:35:38 desktop kernel: usb usb2: Manufacturer: Linux 2.6.1-rc1 uhci_hcd Jan 18 16:35:38 desktop kernel: usb usb2: SerialNumber: 0000:00:10.0 Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:35:38 desktop kernel: usb usb2: registering 2-0:1.0 (config #1, interface 0) Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: usb_probe_interface Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: usb_probe_interface - got id Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: USB hub found Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: 2 ports detected Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: standalone hub Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: ganged power switching Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: global over-current protection Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: Port indicators are not supported Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: power on to power good time: 2ms Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: hub controller current requirement: 0mA Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: local power source is good Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: no over-current condition exists Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: enabling power on all ports Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: port 5, status 501, change 1, 480 Mb/s Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.1: irq 21, io base 0000d800 Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 Jan 18 16:35:38 desktop kernel: drivers/usb/host/uhci-hcd.c: detected 2 ports Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.1: root hub device address 1 Jan 18 16:35:38 desktop kernel: usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 Jan 18 16:35:38 desktop kernel: drivers/usb/core/message.c: USB device number 1 default language ID 0x409 Jan 18 16:35:38 desktop kernel: usb usb3: Product: UHCI Host Controller Jan 18 16:35:38 desktop kernel: usb usb3: Manufacturer: Linux 2.6.1-rc1 uhci_hcd Jan 18 16:35:38 desktop kernel: usb usb3: SerialNumber: 0000:00:10.1 Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:35:38 desktop kernel: usb usb3: registering 3-0:1.0 (config #1, interface 0) Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: usb_probe_interface Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: usb_probe_interface - got id Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: USB hub found Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: 2 ports detected Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: standalone hub Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: ganged power switching Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: global over-current protection Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: Port indicators are not supported Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: power on to power good time: 2ms Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: hub controller current requirement: 0mA Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: local power source is good Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: no over-current condition exists Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: enabling power on all ports Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller Jan 18 16:35:38 desktop kernel: hub 1-0:1.0: debounce: port 5: delay 100ms stable 4 status 0x501 Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.2: irq 21, io base 0000dc00 Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 Jan 18 16:35:38 desktop kernel: drivers/usb/host/uhci-hcd.c: detected 2 ports Jan 18 16:35:38 desktop kernel: uhci_hcd 0000:00:10.2: root hub device address 1 Jan 18 16:35:38 desktop kernel: usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 Jan 18 16:35:38 desktop kernel: drivers/usb/core/message.c: USB device number 1 default language ID 0x409 Jan 18 16:35:38 desktop kernel: usb usb4: Product: UHCI Host Controller Jan 18 16:35:38 desktop kernel: usb usb4: Manufacturer: Linux 2.6.1-rc1 uhci_hcd Jan 18 16:35:38 desktop kernel: usb usb4: SerialNumber: 0000:00:10.2 Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: port 5 full speed --> companion Jan 18 16:35:38 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: port 1, status 100, change 3, 12 Mb/s Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: port 2, status 100, change 3, 12 Mb/s Jan 18 16:35:38 desktop kernel: usb usb4: registering 4-0:1.0 (config #1, interface 0) Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: usb_probe_interface Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: usb_probe_interface - got id Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: USB hub found Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: 2 ports detected Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: standalone hub Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: ganged power switching Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: global over-current protection Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: Port indicators are not supported Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: power on to power good time: 2ms Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: hub controller current requirement: 0mA Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: local power source is good Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: no over-current condition exists Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: enabling power on all ports Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: port 1, status 100, change 3, 12 Mb/s Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: port 2, status 100, change 3, 12 Mb/s Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: port 1 enable change, status 100 Jan 18 16:35:38 desktop kernel: hub 2-0:1.0: port 2 enable change, status 100 Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: port 1, status 101, change 3, 12 Mb/s Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101 Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: new USB device on port 1, assigned address 2 Jan 18 16:35:38 desktop kernel: usb 4-1: new device strings: Mfr=1, Product=2, SerialNumber=0 Jan 18 16:35:38 desktop kernel: drivers/usb/core/message.c: USB device number 2 default language ID 0x409 Jan 18 16:35:38 desktop kernel: usb 4-1: Product: USB Printer Jan 18 16:35:38 desktop kernel: usb 4-1: Manufacturer: EPSON Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:35:38 desktop kernel: usb 4-1: registering 4-1:1.0 (config #1, interface 0) Jan 18 16:35:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: port 2, status 100, change 3, 12 Mb/s Jan 18 16:35:38 desktop kernel: hub 4-0:1.0: port 2 enable change, status 100 Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: port 1 enable change, status 100 Jan 18 16:35:38 desktop kernel: hub 3-0:1.0: port 2 enable change, status 100 Jan 18 16:35:38 desktop kernel: drivers/usb/host/uhci-hcd.c: d400: suspend_hc Jan 18 16:35:38 desktop kernel: drivers/usb/host/uhci-hcd.c: d800: suspend_hc Jan 18 16:35:41 desktop /etc/hotplug/usb.agent[907]: modules.usbmap unparsable line: Jan 18 16:35:41 desktop /etc/hotplug/usb.agent[907]: . Jan 18 16:35:41 desktop /etc/hotplug/usb.agent[907]: modules.usbmap unparsable line: Jan 18 16:35:41 desktop /etc/hotplug/usb.agent[907]: . Jan 18 16:35:41 desktop /etc/hotplug/usb.agent[907]: modules.usbmap unparsable line: Jan 18 16:35:41 desktop /etc/hotplug/usb.agent[907]: . Jan 18 16:35:41 desktop /etc/hotplug/usb.agent[907]: modules.usbmap unparsable line: Jan 18 16:35:41 desktop /etc/hotplug/usb.agent[907]: . Jan 18 16:35:41 desktop /etc/hotplug/usb.agent[942]: Bad USB agent invocation Jan 18 16:35:43 desktop modprobe: FATAL: Module battery not found. Jan 18 16:35:43 desktop kernel: via82xx: Assuming DXS channels with 48k fixed sample rate. Jan 18 16:35:43 desktop kernel: Please try dxs_support=1 option and report if it works on your machine. Jan 18 16:35:43 desktop kernel: PCI: Setting latency timer of device 0000:00:11.5 to 64 Jan 18 16:35:44 desktop kernel: ACPI: Power Button (FF) [PWRF] Jan 18 16:35:44 desktop kernel: ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states) Jan 18 16:35:44 desktop /etc/hotplug/usb.agent[1060]: modules.usbmap unparsable line: Jan 18 16:35:44 desktop /etc/hotplug/usb.agent[1060]: . Jan 18 16:35:44 desktop /etc/hotplug/usb.agent[1060]: modules.usbmap unparsable line: Jan 18 16:35:44 desktop /etc/hotplug/usb.agent[1060]: . Jan 18 16:35:44 desktop /etc/hotplug/usb.agent[1060]: modules.usbmap unparsable line: Jan 18 16:35:44 desktop /etc/hotplug/usb.agent[1060]: . Jan 18 16:35:44 desktop /etc/hotplug/usb.agent[1060]: modules.usbmap unparsable line: Jan 18 16:35:44 desktop /etc/hotplug/usb.agent[1060]: . Jan 18 16:35:44 desktop /etc/hotplug/usb.agent[1099]: Bad USB agent invocation Jan 18 16:35:44 desktop smpppd[1021]: smpppd version 1.06 started Jan 18 16:35:44 desktop kernel: NET: Registered protocol family 10 Jan 18 16:35:45 desktop kernel: Disabled Privacy Extensions on device c0386e20 (lo) Jan 18 16:35:45 desktop kernel: IPv6 over IPv4 tunneling driver Jan 18 16:35:45 desktop sshd[1106]: Server listening on :: port 22. Jan 18 16:35:45 desktop kernel: request_module: failed /sbin/modprobe -- snd-card-1. error = 256 Jan 18 16:35:47 desktop kernel: parport0: PC-style at 0x378 [PCSPP(,...)] Jan 18 16:35:47 desktop kernel: lp0: using parport0 (polling). Jan 18 16:35:47 desktop /etc/hotplug/usb.agent[1309]: modules.usbmap unparsable line: Jan 18 16:35:47 desktop /etc/hotplug/usb.agent[1309]: . Jan 18 16:35:47 desktop /etc/hotplug/usb.agent[1309]: modules.usbmap unparsable line: Jan 18 16:35:47 desktop /etc/hotplug/usb.agent[1309]: . Jan 18 16:35:47 desktop /etc/hotplug/usb.agent[1309]: modules.usbmap unparsable line: Jan 18 16:35:47 desktop /etc/hotplug/usb.agent[1309]: . Jan 18 16:35:47 desktop /etc/hotplug/usb.agent[1309]: modules.usbmap unparsable line: Jan 18 16:35:47 desktop /etc/hotplug/usb.agent[1309]: . Jan 18 16:35:47 desktop /etc/hotplug/usb.agent[1354]: Bad USB agent invocation Jan 18 16:35:48 desktop kernel: request_module: failed /sbin/modprobe -- char-major-4-72. error = 256 Jan 18 16:35:48 desktop /usr/sbin/cron[1481]: (CRON) STARTUP (fork ok) Jan 18 16:35:49 desktop kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic Jan 18 16:35:49 desktop kernel: usbserial 4-1:1.0: usb_probe_interface Jan 18 16:35:49 desktop kernel: usbserial 4-1:1.0: usb_probe_interface - got id Jan 18 16:35:49 desktop kernel: drivers/usb/core/usb.c: registered new driver usbserial Jan 18 16:35:49 desktop kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 Jan 18 16:35:50 desktop /etc/hotplug/usb.agent[1572]: modules.usbmap unparsable line: Jan 18 16:35:50 desktop /etc/hotplug/usb.agent[1572]: . Jan 18 16:35:50 desktop /etc/hotplug/usb.agent[1572]: modules.usbmap unparsable line: Jan 18 16:35:50 desktop /etc/hotplug/usb.agent[1572]: . Jan 18 16:35:50 desktop /etc/hotplug/usb.agent[1572]: modules.usbmap unparsable line: Jan 18 16:35:50 desktop /etc/hotplug/usb.agent[1572]: . Jan 18 16:35:50 desktop /etc/hotplug/usb.agent[1572]: modules.usbmap unparsable line: Jan 18 16:35:50 desktop /etc/hotplug/usb.agent[1572]: . Jan 18 16:35:53 desktop kernel: request_module: failed /sbin/modprobe -- char-major-195-255. error = 256 Jan 18 16:35:54 desktop modprobe: FATAL: Module printer not found. Jan 18 16:35:54 desktop /etc/hotplug/usb.agent[1651]: modules.usbmap unparsable line: Jan 18 16:35:54 desktop /etc/hotplug/usb.agent[1651]: . Jan 18 16:35:54 desktop /etc/hotplug/usb.agent[1651]: modules.usbmap unparsable line: Jan 18 16:35:54 desktop /etc/hotplug/usb.agent[1651]: . Jan 18 16:35:54 desktop /etc/hotplug/usb.agent[1651]: modules.usbmap unparsable line: Jan 18 16:35:54 desktop /etc/hotplug/usb.agent[1651]: . Jan 18 16:35:54 desktop /etc/hotplug/usb.agent[1651]: modules.usbmap unparsable line: Jan 18 16:35:54 desktop /etc/hotplug/usb.agent[1651]: . Jan 18 16:35:54 desktop kdm[1643]: IO Error in XOpenDisplay Jan 18 16:35:54 desktop kdm[1617]: Server for display :0 terminated unexpectedly Jan 18 16:35:55 desktop kernel: eth0: no IPv6 routers present Jan 18 16:35:55 desktop kernel: request_module: failed /sbin/modprobe -- char-major-195-255. error = 256 Jan 18 16:35:56 desktop kdm[1694]: IO Error in XOpenDisplay Jan 18 16:35:56 desktop kdm[1617]: Server for display :0 terminated unexpectedly Jan 18 16:35:56 desktop kdm[1617]: Display :0 cannot be opened Jan 18 16:35:56 desktop kernel: request_module: failed /sbin/modprobe -- char-major-195-255. error = 256 Jan 18 16:35:57 desktop kdm[1703]: IO Error in XOpenDisplay Jan 18 16:35:57 desktop kdm[1617]: Server for display :0 terminated unexpectedly Jan 18 16:35:57 desktop kdm[1617]: Display :0 cannot be opened Jan 18 16:35:57 desktop /etc/hotplug/usb.agent[1716]: Bad USB agent invocation Jan 18 16:35:57 desktop kernel: request_module: failed /sbin/modprobe -- char-major-195-255. error = 256 Jan 18 16:35:58 desktop kdm[1712]: IO Error in XOpenDisplay Jan 18 16:35:58 desktop kdm[1617]: Server for display :0 terminated unexpectedly Jan 18 16:35:58 desktop kdm[1617]: Display :0 cannot be opened Jan 18 16:35:58 desktop kdm[1617]: Display :0 is being disabled (restarting too fast) Jan 18 16:36:17 desktop login[1636]: FAILED LOGIN 1 FROM /dev/tty1 FOR UNKNOWN, User not known to the underlying authentication module Jan 18 16:38:35 desktop kernel: nvidia: module license 'NVIDIA' taints kernel. Jan 18 16:41:28 desktop init: Switching to runlevel: 6 Jan 18 16:41:34 desktop sshd[1106]: Received signal 15; terminating. Jan 18 16:41:34 desktop smpppd[1130]: terminating on signal 15 Jan 18 16:41:34 desktop kernel: request_module: failed /sbin/modprobe -- snd-card-1. error = 256 Jan 18 16:41:35 desktop kernel: drivers/usb/serial/usb-serial.c: USB Serial deregistering driver Generic Jan 18 16:41:35 desktop kernel: drivers/usb/core/usb.c: deregistering driver usbserial Jan 18 16:41:35 desktop kernel: Kernel logging (proc) stopped. Jan 18 16:41:35 desktop kernel: Kernel log daemon terminating. Jan 18 16:41:36 desktop exiting on signal 15 Jan 18 16:44:11 desktop syslogd 1.4.1: restart. Jan 18 16:44:13 desktop /sbin/hotplug[692]: no runnable /etc/hotplug/ usb_host.agent is installed Jan 18 16:44:13 desktop /etc/hotplug/usb.rc[681]: loaded HCD: ehci-hcd Jan 18 16:44:13 desktop /etc/hotplug/usb.rc[681]: loaded HCD: ohci-hcd Jan 18 16:44:13 desktop /sbin/hotplug[733]: no runnable /etc/hotplug/ usb_host.agent is installed Jan 18 16:44:13 desktop /sbin/hotplug[772]: no runnable /etc/hotplug/ usb_host.agent is installed Jan 18 16:44:13 desktop /sbin/hotplug[811]: no runnable /etc/hotplug/ usb_host.agent is installed Jan 18 16:44:13 desktop /etc/hotplug/usb.rc[681]: loaded HCD: uhci-hcd Jan 18 16:44:13 desktop /etc/hotplug/usb.rc[681]: loaded HCD: ehci-hcd Jan 18 16:44:13 desktop /etc/hotplug/usb.rc[681]: FATAL: Module mousedev not found. Jan 18 16:44:14 desktop /etc/hotplug/usb.rc[681]: FATAL: Module keybdev not found. Jan 18 16:44:14 desktop /etc/hotplug/usb.rc[681]: FATAL: Module printer not found. Jan 18 16:44:16 desktop /etc/hotplug/usb.agent[895]: Bad USB agent invocation Jan 18 16:44:16 desktop kernel: klogd 1.4.1, log source = /proc/kmsg started. Jan 18 16:44:16 desktop kernel: Inspecting /boot/System.map-2.6.1-rc1 Jan 18 16:44:17 desktop kernel: Loaded 24789 symbols from /boot/ System.map-2.6.1-rc1. Jan 18 16:44:17 desktop kernel: Symbols match kernel version 2.6.1. Jan 18 16:44:17 desktop kernel: No module symbols loaded - kernel modules not enabled. Jan 18 16:44:17 desktop kernel: eth0: link down Jan 18 16:44:17 desktop kernel: NET: Registered protocol family 17 Jan 18 16:44:17 desktop kernel: raw1394: /dev/raw1394 device initialized Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: registered new driver usbfs Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: registered new driver hub Jan 18 16:44:17 desktop kernel: ehci_hcd: block sizes: qh 128 qtd 96 itd 128 sitd 64 Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: EHCI Host Controller Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: reset hcs_params 0x3206 dbg=0 cc=3 pcc=2 ordered !ppc ports=6 Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: reset hcc_params 6872 thresh 7 uframes 256/512/1024 Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: capability 0001 at 68 Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: irq 21, pci mem e089d000 Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1 Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: init command 010009 (park)=0 ithresh=1 period=256 RUN Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13 Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: root hub device address 1 Jan 18 16:44:17 desktop kernel: usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 Jan 18 16:44:17 desktop kernel: drivers/usb/core/message.c: USB device number 1 default language ID 0x409 Jan 18 16:44:17 desktop kernel: usb usb1: Product: EHCI Host Controller Jan 18 16:44:17 desktop kernel: usb usb1: Manufacturer: Linux 2.6.1-rc1 ehci_hcd Jan 18 16:44:17 desktop kernel: usb usb1: SerialNumber: 0000:00:10.3 Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:44:17 desktop kernel: usb usb1: registering 1-0:1.0 (config #1, interface 0) Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: usb_probe_interface Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: usb_probe_interface - got id Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: USB hub found Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: 6 ports detected Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: standalone hub Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: ganged power switching Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: individual port over-current protection Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: Single TT Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: TT requires at most 8 FS bit times Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: Port indicators are not supported Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: power on to power good time: 0ms Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: hub controller current requirement: 0mA Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: local power source is good Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: no over-current condition exists Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: enabling power on all ports Jan 18 16:44:17 desktop kernel: ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) Jan 18 16:44:17 desktop kernel: ohci_hcd: block sizes: ed 64 td 64 Jan 18 16:44:17 desktop kernel: drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1 Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.0: irq 21, io base 0000d400 Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 Jan 18 16:44:17 desktop kernel: drivers/usb/host/uhci-hcd.c: detected 2 ports Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.0: root hub device address 1 Jan 18 16:44:17 desktop kernel: usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 Jan 18 16:44:17 desktop kernel: drivers/usb/core/message.c: USB device number 1 default language ID 0x409 Jan 18 16:44:17 desktop kernel: usb usb2: Product: UHCI Host Controller Jan 18 16:44:17 desktop kernel: usb usb2: Manufacturer: Linux 2.6.1-rc1 uhci_hcd Jan 18 16:44:17 desktop kernel: usb usb2: SerialNumber: 0000:00:10.0 Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:44:17 desktop kernel: usb usb2: registering 2-0:1.0 (config #1, interface 0) Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: usb_probe_interface Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: usb_probe_interface - got id Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: USB hub found Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: 2 ports detected Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: standalone hub Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: ganged power switching Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: global over-current protection Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: Port indicators are not supported Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: power on to power good time: 2ms Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: hub controller current requirement: 0mA Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: local power source is good Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: no over-current condition exists Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: enabling power on all ports Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: port 5, status 501, change 1, 480 Mb/s Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.1: irq 21, io base 0000d800 Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 Jan 18 16:44:17 desktop kernel: drivers/usb/host/uhci-hcd.c: detected 2 ports Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.1: root hub device address 1 Jan 18 16:44:17 desktop kernel: usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 Jan 18 16:44:17 desktop kernel: drivers/usb/core/message.c: USB device number 1 default language ID 0x409 Jan 18 16:44:17 desktop kernel: usb usb3: Product: UHCI Host Controller Jan 18 16:44:17 desktop kernel: usb usb3: Manufacturer: Linux 2.6.1-rc1 uhci_hcd Jan 18 16:44:17 desktop kernel: usb usb3: SerialNumber: 0000:00:10.1 Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:44:17 desktop kernel: usb usb3: registering 3-0:1.0 (config #1, interface 0) Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: usb_probe_interface Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: usb_probe_interface - got id Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: USB hub found Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: 2 ports detected Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: standalone hub Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: ganged power switching Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: global over-current protection Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: Port indicators are not supported Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: power on to power good time: 2ms Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: hub controller current requirement: 0mA Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: local power source is good Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: no over-current condition exists Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: enabling power on all ports Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller Jan 18 16:44:17 desktop kernel: hub 1-0:1.0: debounce: port 5: delay 100ms stable 4 status 0x501 Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.2: irq 21, io base 0000dc00 Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: port 5 full speed --> companion Jan 18 16:44:17 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 Jan 18 16:44:17 desktop kernel: drivers/usb/host/uhci-hcd.c: detected 2 ports Jan 18 16:44:17 desktop kernel: uhci_hcd 0000:00:10.2: root hub device address 1 Jan 18 16:44:17 desktop kernel: usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 Jan 18 16:44:17 desktop kernel: drivers/usb/core/message.c: USB device number 1 default language ID 0x409 Jan 18 16:44:17 desktop kernel: usb usb4: Product: UHCI Host Controller Jan 18 16:44:17 desktop kernel: usb usb4: Manufacturer: Linux 2.6.1-rc1 uhci_hcd Jan 18 16:44:17 desktop kernel: usb usb4: SerialNumber: 0000:00:10.2 Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: port 1, status 100, change 3, 12 Mb/s Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: port 2, status 100, change 3, 12 Mb/s Jan 18 16:44:17 desktop kernel: usb usb4: registering 4-0:1.0 (config #1, interface 0) Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: usb_probe_interface Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: usb_probe_interface - got id Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: USB hub found Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: 2 ports detected Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: standalone hub Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: ganged power switching Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: global over-current protection Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: Port indicators are not supported Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: power on to power good time: 2ms Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: hub controller current requirement: 0mA Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: local power source is good Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: no over-current condition exists Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: enabling power on all ports Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: port 1, status 100, change 3, 12 Mb/s Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: port 2, status 100, change 3, 12 Mb/s Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: port 1 enable change, status 100 Jan 18 16:44:17 desktop kernel: hub 2-0:1.0: port 2 enable change, status 100 Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: port 1, status 101, change 3, 12 Mb/s Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101 Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: new USB device on port 1, assigned address 2 Jan 18 16:44:17 desktop kernel: usb 4-1: new device strings: Mfr=1, Product=2, SerialNumber=0 Jan 18 16:44:17 desktop kernel: drivers/usb/core/message.c: USB device number 2 default language ID 0x409 Jan 18 16:44:17 desktop kernel: usb 4-1: Product: USB Printer Jan 18 16:44:17 desktop kernel: usb 4-1: Manufacturer: EPSON Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:44:17 desktop kernel: usb 4-1: registering 4-1:1.0 (config #1, interface 0) Jan 18 16:44:17 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: port 2, status 100, change 3, 12 Mb/s Jan 18 16:44:17 desktop kernel: hub 4-0:1.0: port 2 enable change, status 100 Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: port 1 enable change, status 100 Jan 18 16:44:17 desktop kernel: hub 3-0:1.0: port 2 enable change, status 100 Jan 18 16:44:17 desktop kernel: drivers/usb/host/uhci-hcd.c: d400: suspend_hc Jan 18 16:44:17 desktop kernel: drivers/usb/host/uhci-hcd.c: d800: suspend_hc Jan 18 16:44:19 desktop /etc/hotplug/usb.agent[907]: modules.usbmap unparsable line: Jan 18 16:44:19 desktop /etc/hotplug/usb.agent[907]: . Jan 18 16:44:19 desktop /etc/hotplug/usb.agent[907]: modules.usbmap unparsable line: Jan 18 16:44:19 desktop /etc/hotplug/usb.agent[907]: . Jan 18 16:44:19 desktop /etc/hotplug/usb.agent[907]: modules.usbmap unparsable line: Jan 18 16:44:19 desktop /etc/hotplug/usb.agent[907]: . Jan 18 16:44:19 desktop /etc/hotplug/usb.agent[907]: modules.usbmap unparsable line: Jan 18 16:44:19 desktop /etc/hotplug/usb.agent[907]: . Jan 18 16:44:19 desktop /etc/hotplug/usb.agent[942]: Bad USB agent invocation Jan 18 16:44:22 desktop modprobe: FATAL: Module battery not found. Jan 18 16:44:22 desktop kernel: via82xx: Assuming DXS channels with 48k fixed sample rate. Jan 18 16:44:22 desktop kernel: Please try dxs_support=1 option and report if it works on your machine. Jan 18 16:44:22 desktop kernel: PCI: Setting latency timer of device 0000:00:11.5 to 64 Jan 18 16:44:22 desktop kernel: ACPI: Power Button (FF) [PWRF] Jan 18 16:44:22 desktop kernel: ACPI: Processor [CPU0] (supports C1 C2, 2 throttling states) Jan 18 16:44:22 desktop smpppd[1021]: smpppd version 1.06 started Jan 18 16:44:22 desktop kernel: NET: Registered protocol family 10 Jan 18 16:44:22 desktop /etc/hotplug/usb.agent[1059]: modules.usbmap unparsable line: Jan 18 16:44:22 desktop /etc/hotplug/usb.agent[1059]: . Jan 18 16:44:22 desktop /etc/hotplug/usb.agent[1059]: modules.usbmap unparsable line: Jan 18 16:44:22 desktop /etc/hotplug/usb.agent[1059]: . Jan 18 16:44:22 desktop /etc/hotplug/usb.agent[1059]: modules.usbmap unparsable line: Jan 18 16:44:22 desktop /etc/hotplug/usb.agent[1059]: . Jan 18 16:44:22 desktop /etc/hotplug/usb.agent[1059]: modules.usbmap unparsable line: Jan 18 16:44:22 desktop /etc/hotplug/usb.agent[1059]: . Jan 18 16:44:22 desktop /etc/hotplug/usb.agent[1101]: Bad USB agent invocation Jan 18 16:44:22 desktop kernel: Disabled Privacy Extensions on device c0386e20 (lo) Jan 18 16:44:22 desktop kernel: IPv6 over IPv4 tunneling driver Jan 18 16:44:22 desktop sshd[1056]: Server listening on :: port 22. Jan 18 16:44:23 desktop kernel: request_module: failed /sbin/modprobe -- snd-card-1. error = 256 Jan 18 16:44:25 desktop kernel: parport0: PC-style at 0x378 [PCSPP(,...)] Jan 18 16:44:25 desktop kernel: lp0: using parport0 (polling). Jan 18 16:44:25 desktop /etc/hotplug/usb.agent[1340]: modules.usbmap unparsable line: Jan 18 16:44:25 desktop /etc/hotplug/usb.agent[1340]: . Jan 18 16:44:25 desktop /etc/hotplug/usb.agent[1340]: modules.usbmap unparsable line: Jan 18 16:44:25 desktop /etc/hotplug/usb.agent[1340]: . Jan 18 16:44:25 desktop /etc/hotplug/usb.agent[1340]: modules.usbmap unparsable line: Jan 18 16:44:25 desktop /etc/hotplug/usb.agent[1340]: . Jan 18 16:44:25 desktop /etc/hotplug/usb.agent[1340]: modules.usbmap unparsable line: Jan 18 16:44:25 desktop /etc/hotplug/usb.agent[1340]: . Jan 18 16:44:25 desktop /etc/hotplug/usb.agent[1378]: Bad USB agent invocation Jan 18 16:44:26 desktop /usr/sbin/cron[1462]: (CRON) STARTUP (fork ok) Jan 18 16:44:27 desktop kernel: request_module: failed /sbin/modprobe -- char-major-4-72. error = 256 Jan 18 16:44:27 desktop kernel: drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic Jan 18 16:44:27 desktop kernel: usbserial 4-1:1.0: usb_probe_interface Jan 18 16:44:27 desktop kernel: usbserial 4-1:1.0: usb_probe_interface - got id Jan 18 16:44:27 desktop kernel: drivers/usb/core/usb.c: registered new driver usbserial Jan 18 16:44:27 desktop kernel: drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 Jan 18 16:44:28 desktop /etc/hotplug/usb.agent[1574]: modules.usbmap unparsable line: Jan 18 16:44:28 desktop /etc/hotplug/usb.agent[1574]: . Jan 18 16:44:28 desktop /etc/hotplug/usb.agent[1574]: modules.usbmap unparsable line: Jan 18 16:44:28 desktop /etc/hotplug/usb.agent[1574]: . Jan 18 16:44:28 desktop /etc/hotplug/usb.agent[1574]: modules.usbmap unparsable line: Jan 18 16:44:28 desktop /etc/hotplug/usb.agent[1574]: . Jan 18 16:44:28 desktop /etc/hotplug/usb.agent[1574]: modules.usbmap unparsable line: Jan 18 16:44:28 desktop /etc/hotplug/usb.agent[1574]: . Jan 18 16:44:32 desktop /etc/hotplug/usb.agent[1625]: Bad USB agent invocation Jan 18 16:44:33 desktop kernel: eth0: no IPv6 routers present Jan 18 16:44:35 desktop modprobe: FATAL: Module printer not found. Jan 18 16:44:35 desktop /etc/hotplug/usb.agent[1633]: modules.usbmap unparsable line: Jan 18 16:44:35 desktop /etc/hotplug/usb.agent[1633]: . Jan 18 16:44:35 desktop /etc/hotplug/usb.agent[1633]: modules.usbmap unparsable line: Jan 18 16:44:35 desktop /etc/hotplug/usb.agent[1633]: . Jan 18 16:44:35 desktop /etc/hotplug/usb.agent[1633]: modules.usbmap unparsable line: Jan 18 16:44:35 desktop /etc/hotplug/usb.agent[1633]: . Jan 18 16:44:35 desktop /etc/hotplug/usb.agent[1633]: modules.usbmap unparsable line: Jan 18 16:44:35 desktop /etc/hotplug/usb.agent[1633]: . Jan 18 16:44:43 desktop login[1619]: FAILED LOGIN 1 FROM /dev/tty1 FOR UNKNOWN, User not known to the underlying authentication module Jan 18 16:45:03 desktop kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). Jan 18 16:46:52 desktop kernel: nvidia: module license 'NVIDIA' taints kernel. Jan 18 16:46:52 desktop kernel: 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4496 Wed Jul 16 19:03:09 PDT 2003 Jan 18 16:46:53 desktop modprobe: WARNING: Error inserting agpgart (/lib/ modules/2.6.1-rc1/kernel/drivers/char/agp/agpgart.ko): Unknown symbol in module, or unknown parameter (see dmesg) Jan 18 16:46:53 desktop kernel: agpgart: Unknown parameter `agp_try_unsupported' Jan 18 16:46:53 desktop kernel: 0: NVRM: AGPGART: unable to retrieve symbol table Jan 18 16:46:53 desktop kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). Jan 18 16:47:45 desktop kernel: mtrr: no MTRR for d8000000,4000000 found Jan 18 16:48:34 desktop login[2248]: FAILED LOGIN 1 FROM /dev/tty1 FOR jim, Authentication failure Jan 18 16:48:46 desktop modprobe: WARNING: Error inserting agpgart (/lib/ modules/2.6.1-rc1/kernel/drivers/char/agp/agpgart.ko): Unknown symbol in module, or unknown parameter (see dmesg) Jan 18 16:48:46 desktop kernel: agpgart: Unknown parameter `agp_try_unsupported' Jan 18 16:48:46 desktop kernel: 0: NVRM: AGPGART: unable to retrieve symbol table Jan 18 16:48:47 desktop kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). Jan 18 16:48:47 desktop kernel: atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). Jan 18 16:49:07 desktop kernel: request_module: failed /sbin/modprobe -- sound-slot-1. error = 256 Jan 18 16:49:20 desktop kernel: request_module: failed /sbin/modprobe -- snd-card-1. error = 256 Jan 18 16:49:23 desktop kernel: request_module: failed /sbin/modprobe -- snd-card-1. error = 256 Jan 18 16:49:36 desktop kernel: hdh: ATAPI 48X DVD-ROM drive, 512kB Cache Jan 18 16:49:36 desktop kernel: Uniform CD-ROM driver Revision: 3.12 Jan 18 16:49:36 desktop /sbin/hotplug[2533]: no runnable /etc/hotplug/ block.agent is installed Jan 18 16:50:34 desktop su: (to root) jim on /dev/pts/1 Jan 18 16:50:34 desktop su: pam_unix2: session started for user root, service su Jan 18 16:52:38 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 3 status 001803 POWER sig=j CSC CONNECT Jan 18 16:52:38 desktop kernel: hub 1-0:1.0: port 3, status 501, change 1, 480 Mb/s Jan 18 16:52:38 desktop kernel: hub 1-0:1.0: debounce: port 3: delay 100ms stable 4 status 0x501 Jan 18 16:52:38 desktop kernel: ehci_hcd 0000:00:10.3: port 3 high speed Jan 18 16:52:38 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 3 status 001005 POWER sig=se0 PE CONNECT Jan 18 16:52:38 desktop kernel: hub 1-0:1.0: new USB device on port 3, assigned address 2 Jan 18 16:52:38 desktop kernel: usb 1-3: new device strings: Mfr=73, Product=80, SerialNumber=98 Jan 18 16:52:38 desktop kernel: drivers/usb/core/message.c: USB device number 2 default language ID 0x409 Jan 18 16:52:38 desktop kernel: usb 1-3: Product: USB CDRW6402EXT-B Jan 18 16:52:38 desktop kernel: usb 1-3: Manufacturer: Iomega Jan 18 16:52:38 desktop kernel: usb 1-3: SerialNumber: 5300000000032151 Jan 18 16:52:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:52:38 desktop kernel: usb 1-3: registering 1-3:2.0 (config #2, interface 0) Jan 18 16:52:38 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:52:38 desktop kernel: usbserial 1-3:2.0: usb_probe_interface Jan 18 16:52:38 desktop kernel: usbserial 1-3:2.0: usb_probe_interface - got id Jan 18 16:52:38 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status 003802 POWER OWNER sig=j CSC Jan 18 16:52:38 desktop kernel: hub 1-0:1.0: port 5, status 0, change 1, 12 Mb/s Jan 18 16:52:41 desktop /etc/hotplug/usb.agent[2595]: Bad USB agent invocation Jan 18 16:52:45 desktop kernel: Initializing USB Mass Storage driver... Jan 18 16:52:45 desktop kernel: usb-storage 1-3:2.0: usb_probe_interface Jan 18 16:52:45 desktop kernel: usb-storage 1-3:2.0: usb_probe_interface - got id Jan 18 16:52:45 desktop kernel: scsi0 : SCSI emulation for USB Mass Storage devices Jan 18 16:52:45 desktop /sbin/hotplug[2632]: no runnable /etc/hotplug/ scsi_host.agent is installed Jan 18 16:52:47 desktop kernel: Vendor: IOMEGA Model: CDRW6402EXT-B Rev: OOX1 Jan 18 16:52:47 desktop kernel: Type: CD-ROM ANSI SCSI revision: 02 Jan 18 16:52:47 desktop /sbin/hotplug[2639]: no runnable /etc/hotplug/ scsi.agent is installed Jan 18 16:52:47 desktop /etc/hotplug/usb.agent[2603]: modules.usbmap unparsable line: Jan 18 16:52:47 desktop /etc/hotplug/usb.agent[2603]: . Jan 18 16:52:47 desktop /etc/hotplug/usb.agent[2603]: modules.usbmap unparsable line: Jan 18 16:52:47 desktop /etc/hotplug/usb.agent[2603]: . Jan 18 16:52:47 desktop /etc/hotplug/usb.agent[2603]: modules.usbmap unparsable line: Jan 18 16:52:47 desktop /etc/hotplug/usb.agent[2603]: . Jan 18 16:52:47 desktop /etc/hotplug/usb.agent[2603]: modules.usbmap unparsable line: Jan 18 16:52:47 desktop /etc/hotplug/usb.agent[2603]: . Jan 18 16:52:47 desktop /sbin/hotplug[2640]: no runnable /etc/hotplug/ scsi_device.agent is installed Jan 18 16:52:47 desktop kernel: WARNING: USB Mass Storage data integrity not assured Jan 18 16:52:47 desktop kernel: USB Mass Storage device found at 2 Jan 18 16:52:47 desktop kernel: drivers/usb/core/usb.c: registered new driver usb-storage Jan 18 16:52:47 desktop kernel: USB Mass Storage support registered. Jan 18 16:52:47 desktop kernel: Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5 Jan 18 16:52:47 desktop kernel: request_module: failed /sbin/modprobe -- block-major-11-0. error = 256 Jan 18 16:52:53 desktop kernel: sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/ form2 cdda tray Jan 18 16:52:53 desktop kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Jan 18 16:52:53 desktop /sbin/hotplug[2700]: no runnable /etc/hotplug/ block.agent is installed Jan 18 16:52:53 desktop kernel: request_module: failed /sbin/modprobe -- block-major-11-1. error = 256 Jan 18 16:52:58 desktop kernel: end_request: I/O error, dev sr0, sector 0 Jan 18 16:52:58 desktop kernel: Buffer I/O error on device sr0, logical block 0 Jan 18 16:52:58 desktop kernel: end_request: I/O error, dev sr0, sector 0 Jan 18 16:52:58 desktop kernel: FAT: unable to read boot sector Jan 18 16:53:17 desktop kernel: FAT: bogus number of reserved sectors Jan 18 16:53:17 desktop kernel: VFS: Can't find a valid FAT filesystem on dev sr0. Jan 18 16:53:34 desktop kernel: ISO 9660 Extensions: Microsoft Joliet Level 3 Jan 18 16:53:34 desktop kernel: ISO 9660 Extensions: RRIP_1991A Jan 18 16:54:20 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT Jan 18 16:54:20 desktop kernel: hub 1-0:1.0: port 2, status 501, change 1, 480 Mb/s Jan 18 16:54:20 desktop kernel: hub 1-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x501 Jan 18 16:54:20 desktop kernel: ehci_hcd 0000:00:10.3: port 2 high speed Jan 18 16:54:20 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT Jan 18 16:54:20 desktop kernel: hub 1-0:1.0: new USB device on port 2, assigned address 3 Jan 18 16:54:20 desktop kernel: usb 1-2: new device strings: Mfr=56, Product=63, SerialNumber=80 Jan 18 16:54:20 desktop kernel: drivers/usb/core/message.c: USB device number 3 default language ID 0x409 Jan 18 16:54:20 desktop kernel: usb 1-2: Product: 3000LS v01.00.00 Jan 18 16:54:20 desktop kernel: usb 1-2: Manufacturer: Maxtor Jan 18 16:54:20 desktop kernel: usb 1-2: SerialNumber: DEF10647FBB9 Jan 18 16:54:20 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:54:20 desktop kernel: usb 1-2: registering 1-2:1.0 (config #1, interface 0) Jan 18 16:54:20 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:54:20 desktop kernel: usbserial 1-2:1.0: usb_probe_interface Jan 18 16:54:20 desktop kernel: usbserial 1-2:1.0: usb_probe_interface - got id Jan 18 16:54:20 desktop kernel: usb-storage 1-2:1.0: usb_probe_interface Jan 18 16:54:20 desktop kernel: usb-storage 1-2:1.0: usb_probe_interface - got id Jan 18 16:54:20 desktop kernel: scsi1 : SCSI emulation for USB Mass Storage devices Jan 18 16:54:20 desktop /sbin/hotplug[2870]: no runnable /etc/hotplug/ scsi_host.agent is installed Jan 18 16:54:23 desktop /etc/hotplug/usb.agent[2877]: Bad USB agent invocation Jan 18 16:54:24 desktop /sbin/hotplug[2886]: no runnable /etc/hotplug/ scsi.agent is installed Jan 18 16:54:24 desktop kernel: Vendor: Maxtor 2 Model: F040J0 Rev: 0 0 Jan 18 16:54:24 desktop /sbin/hotplug[2893]: no runnable /etc/hotplug/ block.agent is installed Jan 18 16:54:24 desktop kernel: Type: Direct-Access ANSI SCSI revision: 02 Jan 18 16:54:24 desktop kernel: SCSI device sda: 80293248 512-byte hdwr sectors (41110 MB) Jan 18 16:54:24 desktop kernel: sda: assuming drive cache: write through Jan 18 16:54:24 desktop /sbin/hotplug[2900]: no runnable /etc/hotplug/ block.agent is installed Jan 18 16:54:24 desktop /sbin/hotplug[2901]: no runnable /etc/hotplug/ scsi_device.agent is installed Jan 18 16:54:24 desktop kernel: sda: sda1 Jan 18 16:54:24 desktop kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 Jan 18 16:54:24 desktop kernel: Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0 Jan 18 16:54:24 desktop kernel: WARNING: USB Mass Storage data integrity not assured Jan 18 16:54:24 desktop kernel: USB Mass Storage device found at 3 Jan 18 16:54:24 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status 003802 POWER OWNER sig=j CSC Jan 18 16:54:24 desktop kernel: hub 1-0:1.0: port 5, status 0, change 1, 12 Mb/s Jan 18 16:54:26 desktop modprobe: FATAL: Module usb_storage already in kernel. Jan 18 16:54:26 desktop /etc/hotplug/usb.agent[2914]: modules.usbmap unparsable line: Jan 18 16:54:26 desktop /etc/hotplug/usb.agent[2914]: . Jan 18 16:54:26 desktop /etc/hotplug/usb.agent[2914]: modules.usbmap unparsable line: Jan 18 16:54:26 desktop /etc/hotplug/usb.agent[2914]: . Jan 18 16:54:26 desktop /etc/hotplug/usb.agent[2914]: modules.usbmap unparsable line: Jan 18 16:54:26 desktop /etc/hotplug/usb.agent[2914]: . Jan 18 16:54:26 desktop /etc/hotplug/usb.agent[2914]: modules.usbmap unparsable line: Jan 18 16:54:26 desktop /etc/hotplug/usb.agent[2914]: . Jan 18 16:54:26 desktop kernel: request_module: failed /sbin/modprobe -- block-major-11-1. error = 256 Jan 18 16:56:29 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT Jan 18 16:56:29 desktop kernel: hub 1-0:1.0: port 4, status 501, change 1, 480 Mb/s Jan 18 16:56:29 desktop kernel: hub 1-0:1.0: debounce: port 4: delay 100ms stable 4 status 0x501 Jan 18 16:56:29 desktop kernel: ehci_hcd 0000:00:10.3: port 4 full speed --> companion Jan 18 16:56:29 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 4 status 003801 POWER OWNER sig=j CONNECT Jan 18 16:56:29 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status 003802 POWER OWNER sig=j CSC Jan 18 16:56:29 desktop kernel: hub 1-0:1.0: port 5, status 0, change 1, 12 Mb/s Jan 18 16:56:29 desktop kernel: drivers/usb/host/uhci-hcd.c: d800: wakeup_hc Jan 18 16:56:29 desktop kernel: hub 3-0:1.0: port 2, status 101, change 1, 12 Mb/s Jan 18 16:56:29 desktop kernel: hub 3-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x101 Jan 18 16:56:29 desktop kernel: hub 3-0:1.0: new USB device on port 2, assigned address 2 Jan 18 16:56:29 desktop kernel: usb 3-2: new device strings: Mfr=1, Product=2, SerialNumber=0 Jan 18 16:56:29 desktop kernel: drivers/usb/core/message.c: USB device number 2 default language ID 0x409 Jan 18 16:56:29 desktop kernel: usb 3-2: Product: Perfection1200 Jan 18 16:56:29 desktop kernel: usb 3-2: Manufacturer: EPSON Jan 18 16:56:29 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:56:29 desktop kernel: usb 3-2: registering 3-2:1.0 (config #1, interface 0) Jan 18 16:56:29 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:56:29 desktop kernel: usbserial 3-2:1.0: usb_probe_interface Jan 18 16:56:29 desktop kernel: usbserial 3-2:1.0: usb_probe_interface - got id Jan 18 16:56:32 desktop /etc/hotplug/usb.agent[3123]: Bad USB agent invocation Jan 18 16:56:35 desktop modprobe: FATAL: Module scanner not found. Jan 18 16:56:35 desktop /etc/hotplug/usb.agent[3131]: modules.usbmap unparsable line: Jan 18 16:56:35 desktop /etc/hotplug/usb.agent[3131]: . Jan 18 16:56:35 desktop /etc/hotplug/usb.agent[3131]: modules.usbmap unparsable line: Jan 18 16:56:35 desktop /etc/hotplug/usb.agent[3131]: . Jan 18 16:56:35 desktop /etc/hotplug/usb.agent[3131]: modules.usbmap unparsable line: Jan 18 16:56:35 desktop /etc/hotplug/usb.agent[3131]: . Jan 18 16:56:35 desktop /etc/hotplug/usb.agent[3131]: modules.usbmap unparsable line: Jan 18 16:56:35 desktop /etc/hotplug/usb.agent[3131]: . Jan 18 16:56:36 desktop kernel: request_module: failed /sbin/modprobe -- block-major-11-1. error = 256 Jan 18 16:58:28 desktop resmgr[971]: accepted connection from user jim Jan 18 16:58:28 desktop sane-find-scanner: resmgr: server response code 200 Jan 18 16:58:28 desktop resmgr[971]: disconnect from jim Jan 18 16:58:28 desktop resmgr[971]: accepted connection from user jim Jan 18 16:58:28 desktop sane-find-scanner: resmgr: server response code 200 Jan 18 16:58:28 desktop resmgr[971]: disconnect from jim Jan 18 16:58:28 desktop resmgr[971]: accepted connection from user jim Jan 18 16:58:28 desktop sane-find-scanner: resmgr: server response code 200 Jan 18 16:58:28 desktop resmgr[971]: disconnect from jim Jan 18 16:58:28 desktop resmgr[971]: accepted connection from user jim Jan 18 16:58:28 desktop sane-find-scanner: resmgr: server response code 200 Jan 18 16:58:28 desktop resmgr[971]: disconnect from jim Jan 18 16:58:28 desktop kernel: usbfs: USBDEVFS_CONTROL failed cmd sane-find-scann dev 2 rqt 128 rq 6 len 100 ret -32 Jan 18 16:58:28 desktop kernel: usbfs: USBDEVFS_CONTROL failed cmd sane-find-scann dev 2 rqt 128 rq 6 len 100 ret -32 Jan 18 16:58:47 desktop resmgr[971]: accepted connection from user jim Jan 18 16:58:47 desktop scanimage: resmgr: server response code 200 Jan 18 16:58:47 desktop resmgr[971]: disconnect from jim Jan 18 16:58:47 desktop resmgr[971]: accepted connection from user jim Jan 18 16:58:47 desktop scanimage: resmgr: server response code 200 Jan 18 16:58:47 desktop resmgr[971]: disconnect from jim Jan 18 16:58:47 desktop resmgr[971]: accepted connection from user jim Jan 18 16:58:47 desktop scanimage: resmgr: server response code 200 Jan 18 16:58:47 desktop resmgr[971]: disconnect from jim Jan 18 16:58:47 desktop resmgr[971]: accepted connection from user jim Jan 18 16:58:47 desktop scanimage: resmgr: server response code 200 Jan 18 16:58:47 desktop resmgr[971]: disconnect from jim Jan 18 16:58:47 desktop kernel: usb 3-2: usb_disable_device nuking non-ep0 URBs Jan 18 16:58:47 desktop kernel: usb 3-2: unregistering interface 3-2:1.0 Jan 18 16:58:47 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:58:47 desktop kernel: usb 3-2: registering 3-2:1.0 (config #1, interface 0) Jan 18 16:58:47 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 16:58:47 desktop kernel: usbserial 3-2:1.0: usb_probe_interface Jan 18 16:58:47 desktop kernel: usbserial 3-2:1.0: usb_probe_interface - got id Jan 18 16:58:51 desktop kernel: request_module: failed /sbin/modprobe -- block-major-11-1. error = 256 Jan 18 16:58:51 desktop kernel: usb 3-2: control timeout on ep0in Jan 18 16:58:51 desktop kernel: usb 3-2: hcd_unlink_urb cec4df40 fail -22 Jan 18 16:58:51 desktop modprobe: FATAL: Module scanner not found. Jan 18 16:58:51 desktop /etc/hotplug/usb.agent[3368]: modules.usbmap unparsable line: Jan 18 16:58:51 desktop /etc/hotplug/usb.agent[3368]: . Jan 18 16:58:51 desktop /etc/hotplug/usb.agent[3368]: modules.usbmap unparsable line: Jan 18 16:58:51 desktop /etc/hotplug/usb.agent[3368]: . Jan 18 16:58:51 desktop /etc/hotplug/usb.agent[3368]: modules.usbmap unparsable line: Jan 18 16:58:51 desktop /etc/hotplug/usb.agent[3368]: . Jan 18 16:58:51 desktop /etc/hotplug/usb.agent[3368]: modules.usbmap unparsable line: Jan 18 16:58:51 desktop /etc/hotplug/usb.agent[3368]: . Jan 18 16:58:51 desktop kernel: usb 3-2: control timeout on ep0in Jan 18 16:58:51 desktop kernel: usb 3-2: hcd_unlink_urb cec4df40 fail -22 Jan 18 16:58:52 desktop /etc/hotplug/usb.agent[3356]: /var/run/hotplug/ usb-remover-%4b8%104%103%255%255%255: line 3: /etc/hotplug/usb/epson_scanner: Permission denied Jan 18 16:58:52 desktop /etc/hotplug/usb.agent[3356]: FATAL: Module scanner not found. Jan 18 16:58:52 desktop kernel: request_module: failed /sbin/modprobe -- block-major-11-13. error = 256 Jan 18 16:59:00 desktop /USR/SBIN/CRON[3663]: (root) CMD ( rm -f /var/spool/ cron/lastrun/cron.hourly) Jan 18 17:01:28 desktop resmgr[971]: accepted connection from user jim Jan 18 17:01:28 desktop xsane: resmgr: server response code 200 Jan 18 17:01:28 desktop resmgr[971]: accepted connection from user jim Jan 18 17:01:28 desktop resmgr[971]: disconnect from jim Jan 18 17:01:28 desktop resmgr[971]: disconnect from jim Jan 18 17:01:28 desktop xsane: resmgr: server response code 200 Jan 18 17:01:28 desktop resmgr[971]: accepted connection from user jim Jan 18 17:01:28 desktop xsane: resmgr: server response code 200 Jan 18 17:01:28 desktop resmgr[971]: accepted connection from user jim Jan 18 17:01:28 desktop resmgr[971]: disconnect from jim Jan 18 17:01:28 desktop resmgr[971]: disconnect from jim Jan 18 17:01:28 desktop xsane: resmgr: server response code 200 Jan 18 17:01:28 desktop kernel: usb 3-2: usb_disable_device nuking non-ep0 URBs Jan 18 17:01:28 desktop kernel: usb 3-2: unregistering interface 3-2:1.0 Jan 18 17:01:28 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 17:01:28 desktop kernel: usb 3-2: registering 3-2:1.0 (config #1, interface 0) Jan 18 17:01:28 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 17:01:28 desktop kernel: usbserial 3-2:1.0: usb_probe_interface Jan 18 17:01:28 desktop kernel: usbserial 3-2:1.0: usb_probe_interface - got id Jan 18 17:01:28 desktop kernel: usb 3-2: usb_disable_device nuking non-ep0 URBs Jan 18 17:01:28 desktop kernel: usb 3-2: unregistering interface 3-2:1.0 Jan 18 17:01:28 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 17:01:28 desktop kernel: usb 3-2: registering 3-2:1.0 (config #1, interface 0) Jan 18 17:01:28 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 17:01:28 desktop kernel: usbserial 3-2:1.0: usb_probe_interface Jan 18 17:01:28 desktop kernel: usbserial 3-2:1.0: usb_probe_interface - got id Jan 18 17:01:31 desktop kernel: request_module: failed /sbin/modprobe -- block-major-11-1. error = 256 Jan 18 17:01:32 desktop modprobe: FATAL: Module scanner not found. Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: modules.usbmap unparsable line: Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: . Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: modules.usbmap unparsable line: Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: . Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: modules.usbmap unparsable line: Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: . Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: modules.usbmap unparsable line: Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: . Jan 18 17:01:32 desktop kernel: usb 3-2: control timeout on ep0in Jan 18 17:01:32 desktop kernel: usb 3-2: hcd_unlink_urb cea0a640 fail -22 Jan 18 17:01:32 desktop kernel: usb 3-2: control timeout on ep0in Jan 18 17:01:32 desktop kernel: usb 3-2: hcd_unlink_urb cea0a240 fail -22 Jan 18 17:01:32 desktop modprobe: FATAL: Module scanner not found. Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: modules.usbmap unparsable line: Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: . Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: modules.usbmap unparsable line: Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: . Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: modules.usbmap unparsable line: Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: . Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: modules.usbmap unparsable line: Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: . Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: cannot get config descriptor 0, Broken pipe (32) Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: cannot get config descriptor 0, Broken pipe (32) Jan 18 17:01:32 desktop kernel: usbfs: USBDEVFS_CONTROL failed cmd usbmodules dev 2 rqt 128 rq 6 len 9 ret -32 Jan 18 17:01:32 desktop kernel: usbfs: USBDEVFS_CONTROL failed cmd usbmodules dev 2 rqt 128 rq 6 len 32 ret -32 Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3755]: cannot get config descriptor 0, Broken pipe (32) Jan 18 17:01:32 desktop /etc/hotplug/usb.agent[3813]: cannot get config descriptor 0, Broken pipe (32) Jan 18 17:01:32 desktop kernel: usbfs: USBDEVFS_CONTROL failed cmd usbmodules dev 2 rqt 128 rq 6 len 9 ret -32 Jan 18 17:01:32 desktop kernel: usbfs: USBDEVFS_CONTROL failed cmd usbmodules dev 2 rqt 128 rq 6 len 9 ret -32 Jan 18 17:01:32 desktop kernel: usb 3-2: control timeout on ep0in Jan 18 17:01:32 desktop kernel: usb 3-2: hcd_unlink_urb cea0a240 fail -22 Jan 18 17:01:32 desktop kernel: request_module: failed /sbin/modprobe -- block-major-11-1. error = 256 Jan 18 17:01:33 desktop /etc/hotplug/usb.agent[3766]: /var/run/hotplug/ usb-remover-%4b8%104%103%255%255%255: line 3: /etc/hotplug/usb/epson_scanner: Permission denied Jan 18 17:01:33 desktop /etc/hotplug/usb.agent[3766]: FATAL: Module scanner not found. Jan 18 17:01:33 desktop kernel: request_module: failed /sbin/modprobe -- char-major-9-0. error = 256 Jan 18 17:01:35 desktop /etc/hotplug/usb.agent[3804]: FATAL: Module scanner not found. Jan 18 17:07:45 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 4 status 003802 POWER OWNER sig=j CSC Jan 18 17:07:45 desktop kernel: hub 1-0:1.0: port 4, status 0, change 1, 12 Mb/s Jan 18 17:07:45 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status 001002 POWER sig=se0 CSC Jan 18 17:07:45 desktop kernel: hub 1-0:1.0: port 5, status 100, change 1, 12 Mb/s Jan 18 17:07:45 desktop kernel: hub 4-0:1.0: port 1, status 100, change 3, 12 Mb/s Jan 18 17:07:45 desktop kernel: usb 4-1: USB disconnect, address 2 Jan 18 17:07:45 desktop kernel: usb 4-1: usb_disable_device nuking all URBs Jan 18 17:07:45 desktop kernel: usb 4-1: unregistering interface 4-1:1.0 Jan 18 17:07:45 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 17:07:45 desktop kernel: usb 4-1: unregistering device Jan 18 17:07:45 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 17:07:46 desktop kernel: hub 4-0:1.0: port 1 enable change, status 100 Jan 18 17:07:46 desktop kernel: drivers/usb/host/uhci-hcd.c: dc00: suspend_hc Jan 18 17:07:49 desktop kernel: request_module: failed /sbin/modprobe -- block-major-11-1. error = 256 Jan 18 17:07:52 desktop /etc/hotplug/usb.agent[4549]: Bad USB agent invocation Jan 18 17:08:01 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 4 status 003802 POWER OWNER sig=j CSC Jan 18 17:08:01 desktop kernel: hub 1-0:1.0: port 4, status 0, change 1, 12 Mb/s Jan 18 17:08:01 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT Jan 18 17:08:01 desktop kernel: hub 1-0:1.0: port 5, status 501, change 1, 480 Mb/s Jan 18 17:08:01 desktop kernel: hub 1-0:1.0: debounce: port 5: delay 100ms stable 4 status 0x501 Jan 18 17:08:01 desktop kernel: ehci_hcd 0000:00:10.3: port 5 full speed --> companion Jan 18 17:08:01 desktop kernel: ehci_hcd 0000:00:10.3: GetStatus port 5 status 003801 POWER OWNER sig=j CONNECT Jan 18 17:08:01 desktop kernel: drivers/usb/host/uhci-hcd.c: dc00: wakeup_hc Jan 18 17:08:01 desktop kernel: hub 4-0:1.0: port 1, status 101, change 1, 12 Mb/s Jan 18 17:08:01 desktop kernel: hub 4-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101 Jan 18 17:08:01 desktop kernel: hub 4-0:1.0: new USB device on port 1, assigned address 3 Jan 18 17:08:01 desktop kernel: usb 4-1: new device strings: Mfr=1, Product=2, SerialNumber=0 Jan 18 17:08:01 desktop kernel: drivers/usb/core/message.c: USB device number 3 default language ID 0x409 Jan 18 17:08:01 desktop kernel: usb 4-1: Product: USB Printer Jan 18 17:08:01 desktop kernel: usb 4-1: Manufacturer: EPSON Jan 18 17:08:01 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 17:08:01 desktop kernel: usb 4-1: registering 4-1:1.0 (config #1, interface 0) Jan 18 17:08:01 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 17:08:01 desktop kernel: usbserial 4-1:1.0: usb_probe_interface Jan 18 17:08:01 desktop kernel: usbserial 4-1:1.0: usb_probe_interface - got id Jan 18 17:08:05 desktop /etc/hotplug/usb.agent[4592]: Bad USB agent invocation Jan 18 17:08:08 desktop modprobe: FATAL: Module printer not found. Jan 18 17:08:08 desktop /etc/hotplug/usb.agent[4600]: modules.usbmap unparsable line: Jan 18 17:08:08 desktop /etc/hotplug/usb.agent[4600]: . Jan 18 17:08:08 desktop /etc/hotplug/usb.agent[4600]: modules.usbmap unparsable line: Jan 18 17:08:08 desktop /etc/hotplug/usb.agent[4600]: . Jan 18 17:08:08 desktop /etc/hotplug/usb.agent[4600]: modules.usbmap unparsable line: Jan 18 17:08:08 desktop /etc/hotplug/usb.agent[4600]: . Jan 18 17:08:08 desktop /etc/hotplug/usb.agent[4600]: modules.usbmap unparsable line: Jan 18 17:08:08 desktop /etc/hotplug/usb.agent[4600]: . Jan 18 17:08:08 desktop kernel: request_module: failed /sbin/modprobe -- block-major-11-1. error = 256 Jan 18 17:10:04 desktop kernel: usblp 4-1:1.0: usb_probe_interface Jan 18 17:10:04 desktop kernel: usblp 4-1:1.0: usb_probe_interface - got id Jan 18 17:10:04 desktop kernel: drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0001 Jan 18 17:10:04 desktop kernel: drivers/usb/core/file.c: looking for a minor, starting at 0 Jan 18 17:10:04 desktop kernel: drivers/usb/core/usb.c: registered new driver usblp Jan 18 17:10:04 desktop kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Jan 18 17:10:07 desktop /etc/hotplug/usb.agent[4785]: Bad USB agent invocation Jan 18 17:10:52 desktop su: (to root) jim on /dev/pts/4 Jan 18 17:10:52 desktop su: pam_unix2: session started for user root, service su Jan 18 17:10:52 desktop su: pam_unix2: session finished for user root, service su Jan 18 17:10:52 desktop su: (to root) jim on /dev/pts/4 Jan 18 17:10:52 desktop su: pam_unix2: session started for user root, service su Jan 18 17:11:17 desktop kernel: pnp: Device 00:0d disabled. Jan 18 17:11:18 desktop kernel: pnp: Device 00:0d activated. Jan 18 17:11:18 desktop kernel: parport0: PC-style at 0x378 [PCSPP(,...)] Jan 18 17:11:18 desktop kernel: lp0: using parport0 (polling). Jan 18 17:11:18 desktop kernel: pnp: Device 00:0d disabled. Jan 18 17:11:18 desktop kernel: pnp: Device 00:0d activated. Jan 18 17:11:18 desktop kernel: parport0: PC-style at 0x378 [PCSPP(,...)] Jan 18 17:11:18 desktop kernel: usb 4-1: hcd_unlink_urb cdcb27c0 fail -22 Jan 18 17:11:18 desktop kernel: usb 4-1: hcd_unlink_urb cdcb2340 fail -22 Jan 18 17:11:18 desktop kernel: usb 4-1: hcd_unlink_urb cdcb27c0 fail -22 Jan 18 17:11:18 desktop kernel: usb 4-1: hcd_unlink_urb cdcb2340 fail -22 Jan 18 17:11:31 desktop kernel: lp0: using parport0 (polling). Jan 18 17:11:31 desktop kernel: request_module: failed /sbin/modprobe -- char-major-4-72. error = 256 Jan 18 17:11:31 desktop kernel: usb 4-1: hcd_unlink_urb cdcb27c0 fail -22 Jan 18 17:11:31 desktop kernel: usb 4-1: hcd_unlink_urb cdcb2340 fail -22 Jan 18 17:11:33 desktop kernel: request_module: failed /sbin/modprobe -- char-major-4-72. error = 256 Jan 18 17:11:33 desktop kernel: usb 4-1: hcd_unlink_urb cdcb27c0 fail -22 Jan 18 17:12:53 desktop resmgr[971]: accepted connection from user jim Jan 18 17:12:53 desktop xsane: resmgr: server response code 200 Jan 18 17:12:53 desktop resmgr[971]: accepted connection from user jim Jan 18 17:12:53 desktop resmgr[971]: disconnect from jim Jan 18 17:12:53 desktop resmgr[971]: disconnect from jim Jan 18 17:12:53 desktop xsane: resmgr: server response code 200 Jan 18 17:12:53 desktop resmgr[971]: accepted connection from user jim Jan 18 17:12:53 desktop xsane: resmgr: server response code 200 Jan 18 17:12:53 desktop resmgr[971]: accepted connection from user jim Jan 18 17:12:53 desktop resmgr[971]: disconnect from jim Jan 18 17:12:53 desktop resmgr[971]: disconnect from jim Jan 18 17:12:53 desktop xsane: resmgr: server response code 200 Jan 18 17:12:53 desktop kernel: usb 3-2: usb_disable_device nuking non-ep0 URBs Jan 18 17:12:53 desktop kernel: usb 3-2: unregistering interface 3-2:1.0 Jan 18 17:12:53 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 17:12:53 desktop kernel: usb 3-2: registering 3-2:1.0 (config #1, interface 0) Jan 18 17:12:53 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 17:12:53 desktop kernel: usbserial 3-2:1.0: usb_probe_interface Jan 18 17:12:53 desktop kernel: usbserial 3-2:1.0: usb_probe_interface - got id Jan 18 17:12:54 desktop kernel: usb 3-2: usb_disable_device nuking non-ep0 URBs Jan 18 17:12:54 desktop kernel: usb 3-2: unregistering interface 3-2:1.0 Jan 18 17:12:54 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 17:12:54 desktop kernel: usb 3-2: registering 3-2:1.0 (config #1, interface 0) Jan 18 17:12:54 desktop kernel: drivers/usb/core/usb.c: usb_hotplug Jan 18 17:12:54 desktop kernel: usbserial 3-2:1.0: usb_probe_interface Jan 18 17:12:54 desktop kernel: usbserial 3-2:1.0: usb_probe_interface - got id Jan 18 17:12:57 desktop kernel: request_module: failed /sbin/modprobe -- block-major-11-1. error = 256 Jan 18 17:12:57 desktop modprobe: FATAL: Module scanner not found. Jan 18 17:12:57 desktop /etc/hotplug/usb.agent[5304]: modules.usbmap unparsable line: Jan 18 17:12:57 desktop /etc/hotplug/usb.agent[5304]: . Jan 18 17:12:57 desktop /etc/hotplug/usb.agent[5304]: modules.usbmap unparsable line: Jan 18 17:12:57 desktop /etc/hotplug/usb.agent[5304]: . Jan 18 17:12:57 desktop /etc/hotplug/usb.agent[5304]: modules.usbmap unparsable line: Jan 18 17:12:57 desktop /etc/hotplug/usb.agent[5304]: . Jan 18 17:12:57 desktop /etc/hotplug/usb.agent[5304]: modules.usbmap unparsable line: Jan 18 17:12:57 desktop /etc/hotplug/usb.agent[5304]: . Jan 18 17:12:57 desktop kernel: usb 3-2: control timeout on ep0in Jan 18 17:12:57 desktop kernel: usb 3-2: hcd_unlink_urb cdcb2bc0 fail -22 Jan 18 17:12:58 desktop kernel: request_module: failed /sbin/modprobe -- block-major-11-1. error = 256 Jan 18 17:13:00 desktop modprobe: FATAL: Module scanner not found. Jan 18 17:13:00 desktop /etc/hotplug/usb.agent[5591]: modules.usbmap unparsable line: Jan 18 17:13:00 desktop /etc/hotplug/usb.agent[5591]: . Jan 18 17:13:00 desktop /etc/hotplug/usb.agent[5591]: modules.usbmap unparsable line: Jan 18 17:13:00 desktop /etc/hotplug/usb.agent[5591]: . Jan 18 17:13:00 desktop /etc/hotplug/usb.agent[5591]: modules.usbmap unparsable line: Jan 18 17:13:00 desktop /etc/hotplug/usb.agent[5591]: . Jan 18 17:13:00 desktop /etc/hotplug/usb.agent[5591]: modules.usbmap unparsable line: Jan 18 17:13:00 desktop /etc/hotplug/usb.agent[5591]: . Jan 18 17:13:00 desktop kernel: request_module: failed /sbin/modprobe -- block-major-11-1. error = 256 Jan 18 17:13:01 desktop kernel: request_module: failed /sbin/modprobe -- block-major-11-13. error = 256 Jan 18 17:13:02 desktop /etc/hotplug/usb.agent[5744]: /var/run/hotplug/ usb-remover-%4b8%104%103%255%255%255: line 3: /etc/hotplug/usb/epson_scanner: Permission denied Jan 18 17:13:02 desktop /etc/hotplug/usb.agent[5744]: FATAL: Module scanner not found. Jan 18 17:13:11 desktop kernel: usb 4-1: hcd_unlink_urb cdcb27c0 fail -22 Jan 18 17:13:11 desktop kernel: usb 4-1: hcd_unlink_urb cdcb2340 fail -22 Jan 18 17:14:01 desktop su: pam_unix2: session finished for user root, service su Jan 18 17:14:07 desktop gconfd (jim-5909): starting (version 2.2.1), pid 5909 user 'jim' Jan 18 17:14:07 desktop gconfd (jim-5909): Resolved address "xml:readonly:/ etc/opt/gnome/gconf/gconf.xml.mandatory" to a read-only config source at position 0 Jan 18 17:14:07 desktop gconfd (jim-5909): Resolved address "xml:readonly:/ etc/opt/gnome/gconf/preconf/gconf.xml.defaults" to a read-only config source at position 1 Jan 18 17:14:07 desktop gconfd (jim-5909): Resolved address "xml:readwrite:/ home/jim/.gconf" to a writable config source at position 2 Jan 18 17:14:56 desktop kernel: ksysguardd: numerical sysctl 7 2 1 is obsolete. Jan 18 17:44:11 desktop -- MARK --
