Hi,
I'm trying to make my RELISYS 9630 work with SANE 1.0.9.
The scanner is connected to a Adaptec aic7870 card using a debian linux
2.4.18-686 kernel.
The sane-find-scanner finds a scanner, but I cannot make it work.
It seems this scanner has never been tested, maybe I can help the teco1
maintainers ?
Maybe the error is due to the SCSI card, I don't really now.
That is why I join all the commands I tried.
Note : I've never seen this card working with the scanner since I don't
have Windows, so I don't know if both can work together.
Regards.
Pierre SOUCHAY
commands used :
#modprobe aic7xxx
SCSI subsystem driver Revision: 1.00
PCI: Enabling device 02:05.0 (0006 -> 0007)
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4
<Adaptec 2940 SCSI adapter>
aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
Vendor: RELISYS Model: VM6540 Rev: 1.11
Type: Scanner ANSI SCSI revision: 02
(scsi0:A:4:1): refuses synchronous negotiation. Using asynchronous transfers
Vendor: RELISYS Model: VM6540 Rev: 1.11
Type: Scanner ANSI SCSI revision: 02
(scsi0:A:4:2): refuses synchronous negotiation. Using asynchronous transfers
Vendor: RELISYS Model: VM6540 Rev: 1.11
Type: Scanner ANSI SCSI revision: 02
(scsi0:A:4:3): refuses synchronous negotiation. Using asynchronous transfers
Vendor: RELISYS Model: VM6540 Rev: 1.11
Type: Scanner ANSI SCSI revision: 02
(scsi0:A:4:4): refuses synchronous negotiation. Using asynchronous transfers
Vendor: RELISYS Model: VM6540 Rev: 1.11
Type: Scanner ANSI SCSI revision: 02
(scsi0:A:4:5): refuses synchronous negotiation. Using asynchronous transfers
Vendor: RELISYS Model: VM6540 Rev: 1.11
Type: Scanner ANSI SCSI revision: 02
(scsi0:A:4:6): refuses synchronous negotiation. Using asynchronous transfers
Vendor: RELISYS Model: VM6540 Rev: 1.11
Type: Scanner ANSI SCSI revision: 02
(scsi0:A:4:7): refuses synchronous negotiation. Using asynchronous transfers
Vendor: RELISYS Model: VM6540 Rev: 1.11
Type: Scanner ANSI SCSI revision: 02
# sane-find-scanner
found SCSI scanner "RELISYS VM6540 1.11" at /dev/scanner
found SCSI scanner "RELISYS VM6540 1.11" at /dev/sg0
found SCSI scanner "RELISYS VM6540 1.11" at /dev/sg1
found SCSI scanner "RELISYS VM6540 1.11" at /dev/sg2
found SCSI scanner "RELISYS VM6540 1.11" at /dev/sg3
found SCSI scanner "RELISYS VM6540 1.11" at /dev/sg4
found SCSI scanner "RELISYS VM6540 1.11" at /dev/sg5
found SCSI scanner "RELISYS VM6540 1.11" at /dev/sg6
found SCSI scanner "RELISYS VM6540 1.11" at /dev/sg7
[...comments...]
# dmesg (the interresting part :)
Attached scsi generic sg0 at scsi0, channel 0, id 4, lun 0, type 6
Attached scsi generic sg1 at scsi0, channel 0, id 4, lun 1, type 6
Attached scsi generic sg2 at scsi0, channel 0, id 4, lun 2, type 6
Attached scsi generic sg3 at scsi0, channel 0, id 4, lun 3, type 6
Attached scsi generic sg4 at scsi0, channel 0, id 4, lun 4, type 6
Attached scsi generic sg5 at scsi0, channel 0, id 4, lun 5, type 6
Attached scsi generic sg6 at scsi0, channel 0, id 4, lun 6, type 6
Attached scsi generic sg7 at scsi0, channel 0, id 4, lun 7, type 6
(scsi0:A:4:0): refuses synchronous negotiation. Using asynchronous transfers
(scsi0:A:4:0): refuses synchronous negotiation. Using asynchronous transfers
(scsi0:A:4:1): refuses synchronous negotiation. Using asynchronous transfers
(scsi0:A:4:2): refuses synchronous negotiation. Using asynchronous transfers
(scsi0:A:4:3): refuses synchronous negotiation. Using asynchronous transfers
(scsi0:A:4:4): refuses synchronous negotiation. Using asynchronous transfers
(scsi0:A:4:5): refuses synchronous negotiation. Using asynchronous transfers
(scsi0:A:4:6): refuses synchronous negotiation. Using asynchronous transfers
(scsi0:A:4:7): refuses synchronous negotiation. Using asynchronous transfers
# scanimage --liste-devices
scanimage: no SANE devices found
# scanimage -d teco1:/dev/sg0
scanimage: open of device teco1:/dev/sg0 failed: Invalid argument
The result is the same with /dev/sg[0-7]... So it does not work :(
