On Mon, 2002-12-02 at 22:05, Jochen Eisinger wrote: > that's a working configuration for me: > > option io-mode alt_lock > option niceload > port 0x378 > option use600 > option strip-height 16 > option wait-bank 700 > option wait-lamp 15
This is the configuration I had: [with all comments stripped] [M8ram@localhost M8ram]$ cat /etc/sane.d/dll.conf mustek_pp [M8ram@localhost M8ram]$ cat /etc/sane.d/mustek_pp.conf option io-mode alt_lock option niceload port 0x378 # Medion MD9848 (aka Aldi-Scanner) name MD9848 vendor Medion option wait-bank 250 option strip-height 16 option buffer 122400 option use600 Your configuration is resulting again in the completely black image. Just to make sure: * I don't have to restart anything after editing these files do I? (I started xsane after using vi to edit /etc/sane.d/mustek_pp.conf) * I don't have to enable any more modules in /etc/sane.d/dll.conf like mustek to get this working do I? * Something I haven't mentioned before because I can't see how this would affect anything is that the scanner is attached to a "switchbox" (a little box that allows more parallel devices to be attached to a single parallel port.) If the switch is in the wrong position scanimage can't detect the scanner, but the switch is in the correct position. Any other suggestions? TIA -- # Mertens Bram "M8ram" <bram-mert...@linux.be> Linux User #249103 # # Red Hat Linux 7.3 KDE 3.0.0-10 kernel 2.4.18-3 i686 128MB RAM # # 11:40am up 13 days, 30 min, 1 user, load average: 0.22, 0.17, 0.15 #
