Ok it quit on us, here is the full output of the commanline: [root@mew sane.d]# SANE_DEBUG_MUSTEK_PP=255 scanimage [sanei_debug] Setting debug level of mustek_pp to 255. [mustek_pp] sane-mustek_pp, version 0.12-alpha. build for SANE 1.0.11 [mustek_pp] backend by Jochen Eisinger <jochen.eisin...@gmx.net> [mustek_pp] ccd300_init: found scanner on port ``0x378'' [mustek_pp] sane_attach: attaching device ``Mustek-III-EP+'' to port 0x378 (driver ccd300 v0.11-devel by Jochen Eisinger) [mustek_pp] ccd300_capabilities: 600 III EP Plus [mustek_pp] sane_open: Using device ``Mustek-III-EP+'' (driver ccd300 v0.11-devel by Jochen Eisinger) [mustek_pp] ccd300_open: called for port 0x378 [mustek_pp] sane_get_parameters: can't set parameters while scanning [mustek_pp] ccd300_start: starting scanner P6 # SANE data follows 425 583 255 [mustek_pp] sane_read: read finished [mustek_pp] do_stop: terminating reader process [mustek_pp] do_stop: reader_process terminated with status ``Access to resource has been denied'' [mustek_pp] ccd300_stop: stoping scanner [mustek_pp] sane_close: maybe waiting for lamp... [mustek_pp] ccd300_close: turning scanner offline [mustek_pp] sane_close: device closed [mustek_pp] sane_exit: all drivers unloaded [root@mew sane.d]#
End of output. On Thursday 10 April 2003 03:08, e...@tiscali.be wrote: > From: Donald Quaid <dqu...@kittypuss.org> > > >To: sane-de...@www.mostang.com > >Subject: [sane-devel] No devices found with mustek III ep plus > >Date: Thu, 10 Apr 2003 00:23:48 -0500 > > > > > >[root@mew ntr]# SANE_DEBUG_MUSTEK_PP=255 scanimage > >[sanei_debug] Setting debug level of mustek_pp to 255. > >[mustek_pp] sane-mustek_pp, version 0.12-alpha. build for SANE 1.0.11 > >[mustek_pp] backend by Jochen Eisinger <jochen.eisin...@gmx.net> > >[mustek_pp] sane_init: parse error in line 13: unexpected ``option'' > > > > [...] > > > >/etc/sane.d/dll.conf has > >mustek > >mustek_pp > > > >both Un commented. > > > >sorry if I forgot anything else, I have been > >smashing my keyboard in frustration over this. > > The parse errors occur when parsing the mustek_pp.conf file > (probably also in /etc/sane.d, possibly in /usr/local/etc/sane.d). > > The format of the configuration file has changed between 1.0.9 and > 1.0.10, so maybe you are using an old format. (Or you have a > mustek_pp.conf file at both locations, and sane is picking up > the wrong one). > > Your mustek_pp.conf file should only contain something > like this (assuming it's a CCD scanner, not a CIS). > > scanner Mustek-III-EP+ 0x378 ccd300 > > Regards, > > Eddy > > > --------------------------------- > U surft met een klassieke telefoonlijn? > Bespaar tot 25% met Tiscali Complete ! > Speciaal aanbod : eerste abonnementsjaar gratis. > ... Meer info op http://complete.tiscali.be > > > _______________________________________________ > Sane-devel mailing list > sane-de...@www.mostang.com > http://www.mostang.com/mailman/listinfo/sane-devel
