I wrote:
> I have finished the packaging of SANE 1.0.10 on IRIX, using the SGI MIPSpro C
> compiler. You can update the supported platforms page on the SANE web site
> with the following info:
But of course, I forgotten to test the Kodak DC240 backend. And infact, I've
had again problems with the initialization code. The fact is that, on IRIX at
least, after the tcsendbreak(), tcdrain() is needed, otherwise the camera will
not be inited correctly and the backend will refuse to work. I have applied
the same modification to Kodak DC210 backend, which is similar (but I cannot
test it, since I haven't that camera). Here are the patches (note: the patch
for the DC210 backend here replaces completely the patch provided in my
previous message)
diff -ruN sane-backends-1.0.10/backend/dc210.c
sane-backends-1.0.10-patched/backend/dc210.c
--- sane-backends-1.0.10/backend/dc210.c Fri Jan 10 12:21:51 2003
+++ sane-backends-1.0.10-patched/backend/dc210.c Sun Feb 9 02:39:45 2003
@@ -403,6 +403,9 @@
#ifdef HAVE_TCSENDBREAK
tcsendbreak (camera->fd, 0);
+# if defined(__sgi)
+ tcdrain (camera->fd);
+# endif
# elif defined(TCSBRKP)
ioctl (camera->fd, TCSBRKP, 0);
# elif defined(TCSBRK)
@@ -412,9 +415,9 @@
/* and wait for it to recover from the break */
#ifdef HAVE_USLEEP
- usleep (breakpause);
+ usleep (breakpause);
#else
-+ sleep (1);
+ sleep (1);
#endif
if (send_pck (camera->fd, init_pck) == -1)
diff -ruN sane-backends-1.0.10/backend/dc240.c
sane-backends-1.0.10-patched/backend/dc240.c
--- sane-backends-1.0.10/backend/dc240.c Fri Jan 10 12:21:51 2003
+++ sane-backends-1.0.10-patched/backend/dc240.c Sun Feb 9 02:39:50 2003
@@ -448,6 +448,9 @@
#ifdef HAVE_TCSENDBREAK
tcsendbreak (camera->fd, 0);
+# if defined(__sgi)
+ tcdrain (camera->fd);
+# endif
# elif defined(TCSBRKP)
ioctl (camera->fd, TCSBRKP, 0);
# elif defined(TCSBRK)
Andrea
